Web Interface

This page covers the web interface which is reachable on http://192.168.4.1 in Access Point mode or http://nrg-itho-$deviceID.local, e.g. http://nrg-itho-df7d.local/ . The device id is unique to each device.

Key configuration steps

For the initial configuration of the device, see First-setup#wifi-setup

Wifi setup.
Specify the Wifi Access point the add-on needs to connect to.
And configure either static IP-address or have it assigned via DHCP (preferred).
System settings
Configuration of generic system (security) settings
Itho settings
Low level control of the unit. Be careful!
Itho status
View runtime parameters like fan speed.
RF Remotes
Only appears if a CC1101 RF receiver is installed.
MQTT
Configure the MQTT broker the add-on needs to connect to.
API
Documentation on the API.
Help
Link to the Github page.
Update
Update of firmware by uploading the binary package. The system checks for new versions using github.com If your device is on a dedicated IoT Wifi network without internet access, download the firmware from https://github.com/arjenhiemstra/ithowifi and upload it manually
Reset
Restart the device or restore settings.
Debug.
Debug information

Created By Arjen Hiemstra.