TrendNet TUC-ET2G not showing up in interfaces #231
Comments
|
Added the support for the new variant of TUC-ET2G(=v2.0R) in the latest release. |
|
thanks it works both on my DS1515 and DS920+. on DS920+ I get stable 280mb/s on big files. but on DS1515 it is less stable speed fluctuates, on little files speed is really poor like 40mb/s and on big file it reach 175mb/s |
|
One user reports that the driver with DS1515+ is unstable in his environment. #71 |
Is there any plan to build this into a DSM6-compatible release? |
|
I added DSM6 builds for the latest release. |
|
I would like to close this issue as there does not seem to be any work to continue on this issue. |
Description of the problem
Hi, driver installed, it's green in packages, followed instructions it seems ok but the adapter not showing up in network interfaces
I bought TUC-ET2G as mentioned compatible it is plugged with USB-C --> USB-A adapter provided in the kit
Description of your products
Description of your environment
Output of
dmesgcommand[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.108 (root@build2) (gcc version 8.5.0 (GCC) ) #42661 SMP Mon Jun 27 15:03:29 CST 2022
[ 0.000000] CPU: ARMv7 Processor [412fc0f4] revision 4 (ARMv7), cr=30c73c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: AnnapurnaLabs Alpine (Device Tree), model: Annapurna Labs Alpine Dev Board
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat 80649fc0, node_mem_map 806d8000
[ 0.000000] Normal zone: 60 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 48640 pages, LIFO batch:3
[ 0.000000] HighMem zone: 21 pages used for memmap
[ 0.000000] HighMem zone: 16896 pages, LIFO batch:3
[ 0.000000] PERCPU: Embedded 2 pages/cpu @80978000 s40384 r8192 d16960 u65536
[ 0.000000] pcpu-alloc: s40384 r8192 d16960 u65536 alloc=2*32768
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65476
[ 0.000000] Kernel command line: console=ttyS0,115200 ip=off pci=pcie_bus_perf initrd=0x07500000 root=/dev/md0 rw syno_hw_version=DS1515 ihd_num=0 netif_num=4 vmalloc=512M syno_hdd_act_led=10,11,22,23,24
[ 0.000000] Synology Hardware Version: DS1515-j
[ 0.000000] Internal HD num: 0
[ 0.000000] Internal netif num: 4
[ 0.000000] SYNO GPIO hdd active led pin: 10 11 22 23 24
[ 0.000000] PID hash table entries: 4096 (order: -1, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 5, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 4, 524288 bytes)
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 2048MB = 2048MB total
[ 0.000000] Memory: 2081088k/2081088k available, 16064k reserved, 540672K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff8000 ( 32 kB)
fixmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
lowmem : 0x80000000 - 0xdf000000 (1520 MB)
pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
modules : 0x7ec00000 - 0x7fe00000 ( 18 MB)
.text : 0x80008000 - 0x805a7680 (5758 kB)
.init : 0x805a8000 - 0x805f9dc0 ( 328 kB)
.data : 0x80600000 - 0x8064ddd8 ( 312 kB)
.bss : 0x8064ddd8 - 0x806d7d38 ( 552 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] sched_clock: 32 bits at 375MHz, resolution 2ns, wraps every 11453ms
[ 0.000162] Calibrating delay loop... 2793.47 BogoMIPS (lpj=13967360)
[ 0.060025] pid_max: default: 32768 minimum: 301
[ 0.060081] Security Framework initialized
[ 0.060095] AppArmor: AppArmor initialized
[ 0.060118] Mount-cache hash table entries: 4096
[ 0.060537] Initializing cgroup subsys memory
[ 0.060552] Initializing cgroup subsys devices
[ 0.060558] Initializing cgroup subsys freezer
[ 0.060563] Initializing cgroup subsys blkio
[ 0.060594] CPU: Testing write buffer coherency: ok
[ 0.060732] CPU speed: 1.4GHz
[ 0.060752] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.060790] Setting up static identity map for 0x804356c8 - 0x80435720
[ 0.066000] CPU1: Booted secondary processor
[ 0.120788] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.121191] CPU2: Booted secondary processor
[ 0.180788] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.181190] CPU3: Booted secondary processor
[ 0.240788] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.240876] Brought up 4 CPUs
[ 0.240889] SMP: Total of 4 processors activated.
[ 0.240893] CPU: All CPU(s) started in HYP mode.
[ 0.240896] CPU: Virtualization extensions available.
[ 0.241406] devtmpfs: initialized
[ 0.247922] NET: Registered protocol family 16
[ 0.248043] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.248795] Initializing System Fabric
[ 0.248821] Enabling IO Cache Coherency.
[ 0.252349] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.252355] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.261412] bio: create slab at 0
[ 0.262074] SCSI subsystem initialized
[ 0.262302] libata version 3.00 loaded.
[ 0.263303] EDAC MC: Ver: 3.0.0
[ 0.264009] Switching to clocksource arm,sp804
[ 0.295574] AppArmor: AppArmor Filesystem Enabled
[ 0.340846] NET: Registered protocol family 2
[ 0.341225] TCP established hash table entries: 16384 (order: 2, 131072 bytes)
[ 0.341400] TCP bind hash table entries: 16384 (order: 2, 131072 bytes)
[ 0.341572] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.341592] TCP: reno registered
[ 0.341599] UDP hash table entries: 1024 (order: 0, 32768 bytes)
[ 0.341635] UDP-Lite hash table entries: 1024 (order: 0, 32768 bytes)
[ 0.341771] NET: Registered protocol family 1
[ 0.341788] PCI: CLS 0 bytes, default 64
[ 0.341898] Trying to unpack rootfs image as initramfs...
[ 1.398145] Freeing initrd memory: 3648K
[ 1.398269] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
[ 1.398989] al-pcie pcie-internal.3: PCI host bridge to bus 0000:00
[ 1.399000] pci_bus 0000:00: root bus resource [mem 0xfe000000-0xfeffffff]
[ 1.399008] pci_bus 0000:00: root bus resource [bus 00]
[ 1.399015] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 1.399039] pci 0000:00:00.0: [1c36:0002] type 00 class 0x020000
[ 1.399059] pci 0000:00:00.0: reg 10: [mem 0xfe000000-0xfe01ffff 64bit]
[ 1.399075] pci 0000:00:00.0: reg 18: [mem 0xfe020000-0xfe020fff 64bit]
[ 1.399095] pci 0000:00:00.0: reg 20: [mem 0xfe024000-0xfe027fff 64bit]
[ 1.399119] pci 0000:00:00.0: PCI-E Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 1.399160] pci 0000:00:00.0: PME# supported from D3hot D3cold
[ 1.399186] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.399527] pci 0000:00:01.0: [1c36:0001] type 00 class 0x020000
[ 1.399545] pci 0000:00:01.0: reg 10: [mem 0xfe040000-0xfe05ffff 64bit]
[ 1.399559] pci 0000:00:01.0: reg 18: [mem 0xfe060000-0xfe060fff 64bit]
[ 1.399577] pci 0000:00:01.0: reg 20: [mem 0xfe064000-0xfe067fff 64bit]
[ 1.399604] pci 0000:00:01.0: PCI-E Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 1.399636] pci 0000:00:01.0: PME# supported from D3hot D3cold
[ 1.399951] pci 0000:00:02.0: [1c36:0002] type 00 class 0x020000
[ 1.399975] pci 0000:00:02.0: reg 10: [mem 0xfe080000-0xfe09ffff 64bit]
[ 1.399989] pci 0000:00:02.0: reg 18: [mem 0xfe0a0000-0xfe0a0fff 64bit]
[ 1.400001] pci 0000:00:02.0: reg 20: [mem 0xfe0a4000-0xfe0a7fff 64bit]
[ 1.400016] pci 0000:00:02.0: PCI-E Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 1.400049] pci 0000:00:02.0: PME# supported from D3hot D3cold
[ 1.400076] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.400696] pci 0000:00:03.0: [1c36:0001] type 00 class 0x020000
[ 1.400715] pci 0000:00:03.0: reg 10: [mem 0xfe0c0000-0xfe0dffff 64bit]
[ 1.400729] pci 0000:00:03.0: reg 18: [mem 0xfe0e0000-0xfe0e0fff 64bit]
[ 1.400740] pci 0000:00:03.0: reg 20: [mem 0xfe0e4000-0xfe0e7fff 64bit]
[ 1.400757] pci 0000:00:03.0: PCI-E Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 1.400813] pci 0000:00:03.0: PME# supported from D3hot D3cold
[ 1.402517] pci 0000:00:04.0: [1c36:0011] type 00 class 0x100000
[ 1.402545] pci 0000:00:04.0: reg 10: [mem 0xfe100000-0xfe11ffff 64bit]
[ 1.402573] pci 0000:00:04.0: reg 20: [mem 0xfe120000-0xfe121fff 64bit]
[ 1.402596] pci 0000:00:04.0: PCI-E Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 1.402639] pci 0000:00:04.0: PME# supported from D3hot D3cold
[ 1.402670] pci 0000:00:04.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.404368] pci 0000:00:05.0: [1c36:0021] type 00 class 0x088000
[ 1.404392] pci 0000:00:05.0: reg 10: [mem 0xfe140000-0xfe15ffff 64bit]
[ 1.404425] pci 0000:00:05.0: reg 20: [mem 0xfe160000-0xfe161fff 64bit]
[ 1.404443] pci 0000:00:05.0: PCI-E Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 1.404482] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 1.404513] pci 0000:00:05.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.405566] pci 0000:00:08.0: [1c36:0031] type 00 class 0x010601
[ 1.405612] pci 0000:00:08.0: reg 24: [mem 0xfe164000-0xfe167fff]
[ 1.405630] pci 0000:00:08.0: PCI-E Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 1.405668] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 1.409397] pci 0000:00:09.0: [1c36:0031] type 00 class 0x010601
[ 1.409442] pci 0000:00:09.0: reg 24: [mem 0xfe168000-0xfe16bfff]
[ 1.409468] pci 0000:00:09.0: PCI-E Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
[ 1.409495] pci 0000:00:09.0: PME# supported from D3hot D3cold
[ 1.412480] PCI: bus0: Fast back to back transfers disabled
[ 1.412612] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412626] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412643] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412667] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412683] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412706] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412723] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412741] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412760] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412775] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412794] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412817] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412838] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412861] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412875] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412901] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412914] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412928] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412946] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412959] pci 0000:00:04.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412973] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.412988] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413009] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413026] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413042] pci 0000:00:04.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413058] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413073] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413087] pci 0000:00:04.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413101] pci 0000:00:05.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413116] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413127] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413137] pci 0000:00:04.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413149] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413162] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413175] pci 0000:00:04.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413194] pci 0000:00:05.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413207] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413225] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413240] pci 0000:00:04.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413255] pci 0000:00:05.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413265] pci 0000:00:00.0: BAR 0: assigned [mem 0xfe000000-0xfe01ffff 64bit]
[ 1.413285] pci 0000:00:00.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413294] pci 0000:00:00.0: BAR 7: assigned [mem 0xfe020000-0xfe07ffff 64bit]
[ 1.413309] pci 0000:00:01.0: BAR 0: assigned [mem 0xfe080000-0xfe09ffff 64bit]
[ 1.413320] pci 0000:00:02.0: BAR 0: assigned [mem 0xfe0a0000-0xfe0bffff 64bit]
[ 1.413335] pci 0000:00:02.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413343] pci 0000:00:02.0: BAR 7: assigned [mem 0xfe0c0000-0xfe11ffff 64bit]
[ 1.413356] pci 0000:00:03.0: BAR 0: assigned [mem 0xfe120000-0xfe13ffff 64bit]
[ 1.413369] pci 0000:00:04.0: BAR 0: assigned [mem 0xfe140000-0xfe15ffff 64bit]
[ 1.413385] pci 0000:00:04.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413392] pci 0000:00:04.0: BAR 7: assigned [mem 0xfe160000-0xfe17ffff 64bit]
[ 1.413407] pci 0000:00:05.0: BAR 0: assigned [mem 0xfe180000-0xfe19ffff 64bit]
[ 1.413423] pci 0000:00:05.0: reg 324: [mem 0x00000000-0x0001ffff 64bit]
[ 1.413429] pci 0000:00:05.0: BAR 7: assigned [mem 0xfe1a0000-0xfe1bffff 64bit]
[ 1.413440] pci 0000:00:00.0: BAR 4: assigned [mem 0xfe1c0000-0xfe1c3fff 64bit]
[ 1.413452] pci 0000:00:01.0: BAR 4: assigned [mem 0xfe1c4000-0xfe1c7fff 64bit]
[ 1.413462] pci 0000:00:02.0: BAR 4: assigned [mem 0xfe1c8000-0xfe1cbfff 64bit]
[ 1.413477] pci 0000:00:03.0: BAR 4: assigned [mem 0xfe1cc000-0xfe1cffff 64bit]
[ 1.413490] pci 0000:00:08.0: BAR 5: assigned [mem 0xfe1d0000-0xfe1d3fff]
[ 1.413498] pci 0000:00:09.0: BAR 5: assigned [mem 0xfe1d4000-0xfe1d7fff]
[ 1.413505] pci 0000:00:04.0: BAR 4: assigned [mem 0xfe1d8000-0xfe1d9fff 64bit]
[ 1.413518] pci 0000:00:05.0: BAR 4: assigned [mem 0xfe1da000-0xfe1dbfff 64bit]
[ 1.413536] pci 0000:00:00.0: BAR 2: assigned [mem 0xfe1dc000-0xfe1dcfff 64bit]
[ 1.413550] pci 0000:00:01.0: BAR 2: assigned [mem 0xfe1dd000-0xfe1ddfff 64bit]
[ 1.413562] pci 0000:00:02.0: BAR 2: assigned [mem 0xfe1de000-0xfe1defff 64bit]
[ 1.413574] pci 0000:00:03.0: BAR 2: assigned [mem 0xfe1df000-0xfe1dffff 64bit]
[ 1.413669] PCIe 1: Link up. speed gen2 negotiated width 1
[ 1.413678] al-pcie fd800000.pcie-external0: link up: speed Gen 2 width x1
[ 1.413694] Configuring PCIE for IOCC
[ 1.413698] PCIE_1: snoop mode enable
[ 1.417359] al-pcie fd800000.pcie-external0: PCI host bridge to bus 0001:00
[ 1.417371] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff]
[ 1.417378] pci_bus 0001:00: root bus resource [mem 0xe0010000-0xe7ffffff]
[ 1.417386] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 1.417413] pci 0001:00:00.0: [1c36:0031] type 01 class 0x060400
[ 1.417433] pci 0001:00:00.0: reg 10: [mem 0x00000000-0x00000fff]
[ 1.417451] pci 0001:00:00.0: reg 14: [mem 0x00000000-0x00000fff pref]
[ 1.417479] pci 0001:00:00.0: PCI-E Max Payload Size set to 256/ 256 (was 256), Max Read Rq 256
[ 1.417523] pci 0001:00:00.0: supports D1
[ 1.417530] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 1.419979] PCI: bus0: Fast back to back transfers disabled
[ 1.419994] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.421269] pci 0001:01:00.0: [1b4b:9170] type 00 class 0x010601
[ 1.421297] pci 0001:01:00.0: reg 10: [io 0x0000-0x0007]
[ 1.421316] pci 0001:01:00.0: reg 14: [io 0x0008-0x000b]
[ 1.421331] pci 0001:01:00.0: reg 18: [io 0x0010-0x0017]
[ 1.421346] pci 0001:01:00.0: reg 1c: [io 0x0018-0x001b]
[ 1.421360] pci 0001:01:00.0: reg 20: [io 0x0020-0x002f]
[ 1.421378] pci 0001:01:00.0: reg 24: [mem 0xe0000000-0xe00001ff]
[ 1.421391] pci 0001:01:00.0: reg 30: [mem 0xd0000000-0xd000ffff pref]
[ 1.421419] pci 0001:01:00.0: PCI-E Max Payload Size set to 256/ 512 (was 128), Max Read Rq 256
[ 1.421477] pci 0001:01:00.0: PME# supported from D3hot
[ 1.422443] PCI: bus1: Fast back to back transfers disabled
[ 1.422456] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.422480] pci 0001:01:00.0: Apply mv9170 specific programming steps
[ 1.422681] pci 0001:00:00.0: BAR 14: assigned [mem 0xe0100000-0xe01fffff]
[ 1.422691] pci 0001:00:00.0: BAR 15: assigned [mem 0xe0200000-0xe02fffff pref]
[ 1.422698] pci 0001:00:00.0: BAR 0: assigned [mem 0xe0010000-0xe0010fff]
[ 1.422708] pci 0001:00:00.0: BAR 1: assigned [mem 0xe0011000-0xe0011fff pref]
[ 1.422717] pci 0001:00:00.0: BAR 13: assigned [io 0x10000-0x10fff]
[ 1.422726] pci 0001:01:00.0: BAR 6: assigned [mem 0xe0200000-0xe020ffff pref]
[ 1.422733] pci 0001:01:00.0: BAR 5: assigned [mem 0xe0100000-0xe01001ff]
[ 1.422742] pci 0001:01:00.0: BAR 4: assigned [io 0x10000-0x1000f]
[ 1.422755] pci 0001:01:00.0: BAR 0: assigned [io 0x10010-0x10017]
[ 1.422766] pci 0001:01:00.0: BAR 2: assigned [io 0x10018-0x1001f]
[ 1.422779] pci 0001:01:00.0: BAR 1: assigned [io 0x10020-0x10023]
[ 1.422789] pci 0001:01:00.0: BAR 3: assigned [io 0x10024-0x10027]
[ 1.422799] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 1.422808] pci 0001:00:00.0: bridge window [io 0x10000-0x10fff]
[ 1.422815] pci 0001:00:00.0: bridge window [mem 0xe0100000-0xe01fffff]
[ 1.422822] pci 0001:00:00.0: bridge window [mem 0xe0200000-0xe02fffff pref]
[ 1.422910] PCIe 2: Link up. speed gen2 negotiated width 1
[ 1.422917] al-pcie fd820000.pcie-external1: link up: speed Gen 2 width x1
[ 1.422927] Configuring PCIE for IOCC
[ 1.422932] PCIE_2: snoop mode enable
[ 1.424274] al-pcie fd820000.pcie-external1: PCI host bridge to bus 0002:00
[ 1.424286] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff]
[ 1.424293] pci_bus 0002:00: root bus resource [mem 0xe8010000-0xebffffff]
[ 1.424302] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 1.424334] pci 0002:00:00.0: [1c36:0031] type 01 class 0x060400
[ 1.424355] pci 0002:00:00.0: reg 10: [mem 0x00000000-0x00000fff]
[ 1.424370] pci 0002:00:00.0: reg 14: [mem 0x00000000-0x00000fff pref]
[ 1.424405] pci 0002:00:00.0: PCI-E Max Payload Size set to 256/ 256 (was 256), Max Read Rq 256
[ 1.424448] pci 0002:00:00.0: supports D1
[ 1.424454] pci 0002:00:00.0: PME# supported from D0 D1 D3hot
[ 1.425134] PCI: bus0: Fast back to back transfers disabled
[ 1.425146] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.428767] pci 0002:01:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 1.428804] pci 0002:01:00.0: reg 10: [mem 0xe8000000-0xe8007fff 64bit]
[ 1.428882] pci 0002:01:00.0: PCI-E Max Payload Size set to 256/1024 (was 128), Max Read Rq 256
[ 1.428947] pci 0002:01:00.0: supports D1 D2
[ 1.428953] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot
[ 1.431055] PCI: bus1: Fast back to back transfers disabled
[ 1.431067] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.431088] PCI: enabling device 0002:01:00.0 (0140 -> 0142)
[ 1.431112] pci 0002:01:00.0: xHCI controller failing to respond
[ 1.431300] pci 0002:00:00.0: BAR 14: assigned [mem 0xe8100000-0xe81fffff]
[ 1.431309] pci 0002:00:00.0: BAR 0: assigned [mem 0xe8010000-0xe8010fff]
[ 1.431321] pci 0002:00:00.0: BAR 1: assigned [mem 0xe8011000-0xe8011fff pref]
[ 1.431334] pci 0002:01:00.0: BAR 0: assigned [mem 0xe8100000-0xe8107fff 64bit]
[ 1.431354] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 1.431365] pci 0002:00:00.0: bridge window [mem 0xe8100000-0xe81fffff]
[ 1.443965] Initialise module verification
[ 1.444022] audit: initializing netlink socket (disabled)
[ 1.444044] type=2000 audit(1.440:1): initialized
[ 1.455059] bounce pool size: 64 pages
[ 1.457562] VFS: Disk quotas dquot_6.5.2
[ 1.457651] Dquot-cache hash table entries: 8192 (order 0, 32768 bytes)
[ 1.457997] msgmni has been set to 3014
[ 1.458826] Key type asymmetric registered
[ 1.458833] Asymmetric key parser 'x509' registered
[ 1.459095] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 1.459102] io scheduler noop registered
[ 1.459109] io scheduler deadline registered
[ 1.459133] io scheduler cfq registered (default)
[ 1.474484] al_dma: Annapurna Labs DMA Driver 0.01
[ 1.581798] PCI: enabling device 0000:00:05.0 (0000 -> 0002)
[ 1.690789] pci 0000:00:05.1: [1c36:8021] type 00 class 0x088000
[ 1.690824] pci 0000:00:05.1: PCI-E Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
[ 1.801787] PCI: enabling device 0000:00:05.1 (0400 -> 0402)
[ 1.809441] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.828048] fd883000.uart0: ttyS0 at MMIO 0xfd883000 (irq = 49) is a 16550A
[ 2.968205] console [ttyS0] enabled
[ 2.972357] fd884000.uart1: ttyS1 at MMIO 0xfd884000 (irq = 50) is a 16550A
[ 3.092963] brd: module loaded
[ 3.096990] Loading iSCSI transport class v2.0-870.
[ 3.139558] ahci 0000:00:08.0: version 3.0
[ 3.139575] PCI: enabling device 0000:00:08.0 (0000 -> 0002)
[ 3.145330] ahci 0000:00:08.0: use MSIX for ahci controller. vectors: 4
[ 3.152012] ahci 0000:00:08.0: controller can't do PMP, turning off CAP_PMP
[ 3.158963] ahci 0000:00:08.0: forcing PORTS_IMPL to 0xf
[ 3.164385] ahci 0000:00:08.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 3.172467] ahci 0000:00:08.0: flags: 64bit ncq sntf pm led clo only fbs pio slum part ccc apst
[ 3.201946] scsi0 : ahci
[ 3.208747] scsi1 : ahci
[ 3.214597] scsi2 : ahci
[ 3.218670] scsi3 : ahci
[ 3.223611] ata1: SATA max UDMA/133 abar m16384@0xfe1d0000 port 0xfe1d0100 irq 132
[ 3.231193] ata2: SATA max UDMA/133 abar m16384@0xfe1d0000 port 0xfe1d0180 irq 133
[ 3.238749] ata3: SATA max UDMA/133 abar m16384@0xfe1d0000 port 0xfe1d0200 irq 134
[ 3.246369] ata4: SATA max UDMA/133 abar m16384@0xfe1d0000 port 0xfe1d0280 irq 135
[ 3.253981] PCI: enabling device 0000:00:09.0 (0000 -> 0002)
[ 3.259647] ahci 0000:00:09.0: use MSIX for ahci controller. vectors: 4
[ 3.266300] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 3.273253] ahci 0000:00:09.0: forcing PORTS_IMPL to 0xf
[ 3.278657] ahci 0000:00:09.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 3.286739] ahci 0000:00:09.0: flags: 64bit ncq sntf pm led clo only fbs pio slum part ccc apst
[ 3.313875] scsi4 : ahci
[ 3.321176] scsi5 : ahci
[ 3.329126] scsi6 : ahci
[ 3.333952] scsi7 : ahci
[ 3.337151] ata5: SATA max UDMA/133 abar m16384@0xfe1d4000 port 0xfe1d4100 irq 136
[ 3.344723] ata6: SATA max UDMA/133 abar m16384@0xfe1d4000 port 0xfe1d4180 irq 137
[ 3.352287] ata7: SATA max UDMA/133 abar m16384@0xfe1d4000 port 0xfe1d4200 irq 138
[ 3.359842] ata8: SATA max UDMA/133 abar m16384@0xfe1d4000 port 0xfe1d4280 irq 139
[ 3.367470] ahci: probe of 0001:00:00.0 failed with error -22
[ 3.373224] PCI: enabling device 0001:01:00.0 (0140 -> 0143)
[ 3.378917] ahci 0001:01:00.0: controller can't do NCQ, turning off CAP_NCQ
[ 3.385940] Change defer qc mode on external port for compatibility
[ 3.392195] Change defer qc mode on external port for compatibility
[ 3.398469] ahci 0001:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 3.406547] ahci 0001:01:00.0: flags: 64bit sntf led only pmp fbs pio slum part sxs
[ 3.419929] scsi8 : ahci
[ 3.428062] scsi9 : ahci
[ 3.433478] ata9: FORCE: PHY spd limit set to 3.0 Gbps
[ 3.438613] ata9: SATA max UDMA/133 abar m512@0xe0100000 port 0xe0100100 irq 140
[ 3.446018] ata10: FORCE: PHY spd limit set to 3.0 Gbps
[ 3.451251] ata10: SATA max UDMA/133 abar m512@0xe0100000 port 0xe0100180 irq 140
[ 3.458769] ahci: probe of 0002:00:00.0 failed with error -22
[ 3.478809] dw_spi_mmio fd882000.spi: master is unqueued, this is deprecated
[ 3.487787] m25p80 spi0.0: found mx25u6435f, expected spi_flash_jedec_detection
[ 3.495158] m25p80 spi0.0: mx25u6435f (8192 Kbytes)
[ 3.500040] Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
[ 3.529724] 6 RedBoot partitions found on MTD device spi0.0
[ 3.535354] Creating 6 MTD partitions on "spi0.0":
[ 3.540134] 0x000000000000-0x000000090000 : "RedBoot"
[ 3.546509] 0x000000090000-0x000000370000 : "zImage"
[ 3.555654] 0x000000370000-0x0000007d0000 : "rd.gz"
[ 3.567346] 0x0000007d0000-0x0000007e0000 : "vendor"
[ 3.572496] vender Mac0 address : 00:11:32:49:48:5f
[ 3.577371] vender Mac1 address : 00:11:32:49:48:60
[ 3.582279] vender Mac2 address : 00:11:32:49:48:61
[ 3.587149] vender Mac3 address : 00:11:32:49:48:62
[ 3.592050] serial number='1550N5N035000'
[ 3.597581] 0x0000007e0000-0x0000007f0000 : "RedBoot Config"
[ 3.600843] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.600866] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.600889] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.600909] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.604822] ata2.00: ATA-10: WDC WD2003FZEX-00SRLA0, 01.01A01, max UDMA/133
[ 3.604825] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.604828] ata2.00: SN: WD-WMC6N0EA2LD6
[ 3.604952] ata1.00: ATA-10: WDC WD2003FZEX-00SRLA0, 01.01A01, max UDMA/133
[ 3.604956] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.604958] ata1.00: SN: WD-WMC6N0D16TKK
[ 3.606816] ata3.00: ATA-10: WDC WD2003FZEX-00SRLA0, 01.01A01, max UDMA/133
[ 3.606821] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.606823] ata3.00: SN: WD-WMC6N0DA7H2A
[ 3.608263] ata4.00: ATA-10: WDC WD2003FZEX-00SRLA0, 01.01A01, max UDMA/133
[ 3.608268] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.608273] ata4.00: SN: WD-WMC6N0E65M7V
[ 3.612228] ata2.00: configured for UDMA/133
[ 3.612290] ata1.00: configured for UDMA/133
[ 3.614190] ata3.00: configured for UDMA/133
[ 3.614737] scsi 0:0:0:0: Direct-Access WDC WD2003FZEX-00SRLA0 01.0 PQ: 0 ANSI: 5
[ 3.615697] ata4.00: configured for UDMA/133
[ 3.617463] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.617469] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.617644] sd 0:0:0:0: [sda] Write Protect is off
[ 3.617649] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.617721] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.624211] scsi 1:0:0:0: Direct-Access WDC WD2003FZEX-00SRLA0 01.0 PQ: 0 ANSI: 5
[ 3.630064] sda: sda1 sda2 sda3
[ 3.632874] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.632878] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.633054] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.633059] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.633128] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.648247] scsi 2:0:0:0: Direct-Access WDC WD2003FZEX-00SRLA0 01.0 PQ: 0 ANSI: 5
[ 3.650917] sdb: sdb1 sdb2 sdb3
[ 3.665652] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.693403] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.693407] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 3.693578] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.693583] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.693660] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.700833] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.700837] ata7: No present pin info for SATA link down event
[ 3.709304] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.710835] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.710839] ata8: No present pin info for SATA link down event
[ 3.710875] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.710879] ata6: No present pin info for SATA link down event
[ 3.710917] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.711442] ata5.00: ATA-9: WDC WD2003FZEX-00Z4SA0, 01.01A01, max UDMA/133
[ 3.711447] ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.711450] ata5.00: SN: WD-WCC1F0179572
[ 3.712040] ata5.00: configured for UDMA/133
[ 3.713834] scsi 3:0:0:0: Direct-Access WDC WD2003FZEX-00SRLA0 01.0 PQ: 0 ANSI: 5
[ 3.718627] sdc: sdc1 sdc2 sdc3
[ 3.742190] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.742194] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 3.742352] sd 3:0:0:0: [sdd] Write Protect is off
[ 3.742357] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.742428] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.755746] sdd: sdd1 sdd2 sdd3
[ 3.755792] scsi 4:0:0:0: Direct-Access WDC WD2003FZEX-00Z4SA0 01.0 PQ: 0 ANSI: 5
[ 3.758157] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.771242] sd 4:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.771246] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 3.771428] sd 4:0:0:0: [sde] Write Protect is off
[ 3.771435] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 3.771519] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.800849] ata9: SATA link down (SStatus 0 SControl 320)
[ 3.800855] ata9: No present pin info for SATA link down event
[ 3.800908] ata10: SATA link down (SStatus 0 SControl 320)
[ 3.800913] ata10: No present pin info for SATA link down event
[ 3.814338] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 3.819987] sde: sde1 sde2 sde3
[ 3.831846] sd 4:0:0:0: [sde] Attached SCSI disk
[ 4.021691] 0x0000007f0000-0x000000800000 : "FIS directory"
[ 4.040865] al_eth_drv: AnnapurnaLabs unified 1GbE and 10GbE Ethernet Driver al_eth v0.2 (Feb 18, 2013)
[ 4.050355] al_eth 0000:00:00.0: Board info: phy exist Yes. phy addr 4. mdio freq 1000 Khz. SFP connected No. media 3
[ 4.073875] al_eth 0000:00:00.0 eth0: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe000000, mac addr 5e:63:16:e0:fd:c5
[ 4.084874] al_eth 0000:00:01.0: Board info: phy exist Yes. phy addr 1. mdio freq 1000 Khz. SFP connected No. media 3
[ 4.112350] al_eth 0000:00:01.0 eth1: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe080000, mac addr de:7c:4b:b4:30:ce
[ 4.123327] al_eth 0000:00:02.0: Board info: phy exist Yes. phy addr 2. mdio freq 1000 Khz. SFP connected No. media 3
[ 4.145650] al_eth 0000:00:02.0 eth2: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe0a0000, mac addr 5a:0f:c8:e9:ff:47
[ 4.156666] al_eth 0000:00:03.0: Board info: phy exist Yes. phy addr 3. mdio freq 1000 Khz. SFP connected No. media 3
[ 4.182888] al_eth 0000:00:03.0 eth3: AnnapurnaLabs unified 1Gbe/10Gbe found at mem fe120000, mac addr 36:cd:ed:31:bc:24
[ 4.194087] i2c /dev entries driver
[ 4.198163] pca954x 0-0070: probe failed
[ 4.220292] al_thermal_probe: Thermal Sensor Loaded at: 0xe42b0a00.
[ 4.226797] md: raid1 personality registered for level 1
[ 4.232185] al_mc_edac fb080000.mc: No ECC present, or ECC disabled
[ 4.238652] cpuidle: using governor ladder
[ 4.242755] cpuidle: using governor menu
[ 4.247032] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.253141] al_crypto: Annapurna Labs Crypto Driver 0.01
[ 4.361859] PCI: enabling device 0000:00:04.0 (0000 -> 0002)
[ 4.470867] pci 0000:00:04.1: [1c36:8011] type 00 class 0x100000
[ 4.470904] pci 0000:00:04.1: PCI-E Max Payload Size set to 128/ 128 (was 128), Max Read Rq 128
[ 4.581859] PCI: enabling device 0000:00:04.1 (0400 -> 0402)
[ 4.591999] al_crypto 0000:00:04.1: al_crypto_pci_probe: Skipping alg/hash initialization, no allocated channels
[ 4.615812] al_crypto 0000:00:04.0: algorithms registered in /proc/crypto
[ 4.624037] al_crypto 0000:00:04.0: hash algorithms registered in /proc/crypto
[ 4.631253] al_crypto 0000:00:04.0: al_crypto_pci_probe: Skipping crc initialization, no allocated channels
[ 4.641501] TCP: cubic registered
[ 4.644815] NET: Registered protocol family 17
[ 4.649285] Key type dns_resolver registered
[ 4.653676] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 4.662866] Loading module verification blacklist certificates
[ 4.668689] Loading module verification certificates
[ 4.673776] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[ 4.687094] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[ 4.697457] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[ 4.709287] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[ 4.719367] registered taskstats version 1
[ 4.724113] Freeing unused kernel memory: 320K
[ 4.906558] usbcore: registered new interface driver usbfs
[ 4.912323] usbcore: registered new interface driver hub
[ 4.918042] usbcore: registered new interface driver ethub
[ 4.923929] usbcore: registered new device driver usb
[ 4.983776] etxhci_hcd-170202 0002:01:00.0: Etron xHCI Host Controller
[ 4.990308] etxhci_hcd-170202 0002:01:00.0: new USB bus registered, assigned bus number 1
[ 5.011924] xHCI etxhci_add_endpoint called for root hub
[ 5.011931] xHCI etxhci_check_bandwidth called for root hub
[ 5.012317] ethub 1-0:1.0: USB hub found
[ 5.016248] ethub 1-0:1.0: 2 ports detected
[ 5.020610] etxhci_hcd-170202 0002:01:00.0: Etron xHCI Host Controller
[ 5.027190] etxhci_hcd-170202 0002:01:00.0: new USB bus registered, assigned bus number 2
[ 5.036299] xHCI etxhci_add_endpoint called for root hub
[ 5.036305] xHCI etxhci_check_bandwidth called for root hub
[ 5.036587] ethub 2-0:1.0: USB hub found
[ 5.040517] ethub 2-0:1.0: 2 ports detected
[ 5.109200] ds1515_synobios: module license 'Synology Inc.' taints kernel.
[ 5.116071] Disabling lock debugging due to kernel taint
[ 5.122297] synobios open /dev/ttyS1 success
[ 5.126561] Synobios DS1515 GPIO initialized
[ 5.131081] correction with 0x00
[ 5.135340] 2022-7-14 3:59:19 UTC
[ 5.138649] synobios: load, major number 201
[ 5.142993] Brand: Synology
[ 5.145782] Model: DS-1515
[ 5.148482] set group disks wakeup number to 5, spinup time deno 1
[ 5.154666] synobios cpu_arch proc entry initialized
[ 5.159620] synobios crypto_hw proc entry initialized
[ 5.164673] synobios syno_platform proc entry initialized
[ 5.182503] Module [ds1515_synobios] is removed.
[ 5.187302] synobios: unload
[ 5.379807] md: md0 stopped.
[ 5.386034] md: bind
[ 5.388967] md: bind
[ 5.391944] md: bind
[ 5.394912] md: bind
[ 5.397987] md: bind
[ 5.401158] md/raid1:md0: active with 5 out of 5 mirrors
[ 5.416286] md0: detected capacity change from 0 to 2549940224
[ 5.422994] md0: unknown partition table
[ 5.579923] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 5.588965] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 5.621067] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.340834] usb 1-2: new full-speed USB device number 2 using etxhci_hcd-170202
[ 6.381080] usb 1-2: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes
[ 6.433612] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 6.442588] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 6.460957] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 6.669297] loop: module loaded
[ 7.521167] usb 2-1: new SuperSpeed USB device number 2 using etxhci_hcd-170202
[ 11.093630] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 11.102721] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 11.120995] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
[ 11.367218] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (240)
[ 11.380969] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 11.719154] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 11.737241] systemd[1]: Detected architecture arm.
[ 11.747479] systemd[1]: Set hostname to .
[ 14.090700] systemd[1]: Cannot add dependency job for unit synocachepinfiled.service, ignoring: Unit synocachepinfiled.service is masked.
[ 14.103191] systemd[1]: Cannot add dependency job for unit synoperfeventd.service, ignoring: Unit synoperfeventd.service is masked.
[ 14.115288] systemd[1]: Cannot add dependency job for unit SynoLedBrightness.service, ignoring: Unit SynoLedBrightness.service is masked.
[ 14.127795] systemd[1]: Cannot add dependency job for unit pkg-install-low-priority-builtin.service, ignoring: Unit pkg-install-low-priority-builtin.service failed to load: No such file or directory.
[ 14.145572] systemd[1]: Cannot add dependency job for unit pkg-install-high-priority-builtin.service, ignoring: Unit pkg-install-high-priority-builtin.service failed to load: No such file or directory.
[ 14.167714] systemd[1]: Created slice Root Slice.
[ 14.173788] systemd[1]: Starting Root Slice.
[ 14.179787] systemd[1]: Created slice ScsiTarget's slice.
[ 14.185945] systemd[1]: Starting ScsiTarget's slice.
[ 14.192628] systemd[1]: Created slice Apache2.4's slice.
[ 14.198960] systemd[1]: Starting Apache2.4's slice.
[ 14.205587] systemd[1]: Created slice System Slice.
[ 14.211493] systemd[1]: Starting System Slice.
[ 14.217625] systemd[1]: Created slice Node.js_v12's slice.
[ 14.224148] systemd[1]: Starting Node.js_v12's slice.
[ 14.230925] systemd[1]: Created slice scemd.
[ 14.236208] systemd[1]: Starting scemd.
[ 14.241774] systemd[1]: Created slice SMBService's slice.
[ 14.248192] systemd[1]: Starting SMBService's slice.
[ 14.254887] systemd[1]: Created slice BTRFS Optimization.
[ 14.261320] systemd[1]: Starting BTRFS Optimization.
[ 14.267983] systemd[1]: Created slice PHP7.4's slice.
[ 14.274080] systemd[1]: Starting PHP7.4's slice.
[ 14.280402] systemd[1]: Created slice SSDP service.
[ 14.286324] systemd[1]: Starting SSDP service.
[ 14.292486] systemd[1]: Created slice synobackup daemon slice.
[ 14.299343] systemd[1]: Starting synobackup daemon slice.
[ 14.306490] systemd[1]: Created slice Synology Flashcache.
[ 14.312981] systemd[1]: Starting Synology Flashcache.
[ 14.319738] systemd[1]: Created slice Synology DSM internal service.
[ 14.327130] systemd[1]: Starting Synology DSM internal service.
[ 14.334768] systemd[1]: Created slice Synology DSM Storage Service.
[ 14.342063] systemd[1]: Starting Synology DSM Storage Service.
[ 14.349601] systemd[1]: Created slice Package Center Slice.
[ 14.356211] systemd[1]: Starting Package Center Slice.
[ 14.362934] systemd[1]: Listening on Journal Socket.
[ 14.369087] systemd[1]: Starting Journal Socket.
[ 14.376862] systemd[1]: Starting Synology Task Scheduler Init...
[ 14.383956] systemd[1]: Started Set project quota ID for /var/log.
[ 14.393278] systemd[1]: Starting Set time zone information to kernel...
[ 14.403090] systemd[1]: Starting Set hostname...
[ 14.408877] systemd[1]: Created slice MariaDB10's slice.
[ 14.414927] systemd[1]: Starting MariaDB10's slice.
[ 14.421343] systemd[1]: Listening on udev Kernel Socket.
[ 14.427782] systemd[1]: Starting udev Kernel Socket.
[ 14.434582] systemd[1]: Created slice Task Scheduler Group.
[ 14.441087] systemd[1]: Starting Task Scheduler Group.
[ 14.447926] systemd[1]: Created slice Perl's slice.
[ 14.453923] systemd[1]: Starting Perl's slice.
[ 14.459996] systemd[1]: Created slice Synology DSM desktop service.
[ 14.467294] systemd[1]: Starting Synology DSM desktop service.
[ 14.474857] systemd[1]: Created slice MailServer's slice.
[ 14.481273] systemd[1]: Starting MailServer's slice.
[ 14.487997] systemd[1]: Created slice Synology Swap Works.
[ 14.494468] systemd[1]: Starting Synology Swap Works.
[ 14.502631] systemd[1]: Starting Set boot sequence config...
[ 14.509866] systemd[1]: Created slice ActiveInsight's slice.
[ 14.516372] systemd[1]: Starting ActiveInsight's slice.
[ 14.523335] systemd[1]: Created slice Synology Index slice (WAT).
[ 14.530414] systemd[1]: Starting Synology Index slice (WAT).
[ 14.537801] systemd[1]: Created slice SNMP.
[ 14.543010] systemd[1]: Starting SNMP.
[ 14.548196] systemd[1]: Reached target Paths.
[ 14.553866] systemd[1]: Starting Paths.
[ 14.560733] systemd[1]: Starting unbind USB device...
[ 14.567372] systemd[1]: Created slice Shared Folder Sync.
[ 14.573730] systemd[1]: Starting Shared Folder Sync.
[ 14.581703] systemd[1]: Starting check integrity of rd.gz decompression...
[ 14.589942] systemd[1]: Listening on udev Control Socket.
[ 14.596509] systemd[1]: Starting udev Control Socket.
[ 14.603383] systemd[1]: Created slice r8152's slice.
[ 14.609248] systemd[1]: Starting r8152's slice.
[ 14.615503] systemd[1]: Created slice Synology Cache Advisor.
[ 14.622278] systemd[1]: Starting Synology Cache Advisor.
[ 14.630915] systemd[1]: Starting Link coredump path to volume if possible...
[ 14.639360] systemd[1]: Created slice SynologyPhotos's slice.
[ 14.645910] systemd[1]: Starting SynologyPhotos's slice.
[ 14.654577] systemd[1]: Starting Synology swap...
[ 14.661902] systemd[1]: Starting Journal Socket (/dev/log).
[ 14.670767] systemd[1]: Starting Load Kernel Modules...
[ 14.676838] systemd[1]: Created slice BTRFS Space Reclaim.
[ 14.683189] systemd[1]: Starting BTRFS Space Reclaim.
[ 14.691806] systemd[1]: Starting Disabling fan checking flag ......
[ 14.700570] systemd[1]: Mounting Temporary Directory...
[ 14.707060] systemd[1]: Listening on Journal Audit Socket.
[ 14.714077] systemd[1]: Created slice OAuthService's slice.
[ 14.720540] systemd[1]: Starting OAuthService's slice.
[ 14.727509] systemd[1]: Created slice SecureSignIn's slice.
[ 14.733999] systemd[1]: Starting SecureSignIn's slice.
[ 14.741068] systemd[1]: Created slice FileStation's slice.
[ 14.747346] systemd[1]: Starting FileStation's slice.
[ 14.755667] systemd[1]: Starting Load ntb_brd module...
[ 14.762356] systemd[1]: Created slice WebStation's slice.
[ 14.768547] systemd[1]: Starting WebStation's slice.
[ 14.775534] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 14.782618] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 14.790297] systemd[1]: Created slice system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[ 14.799495] systemd[1]: Starting system-syno\x2dmd\x2dresync\x2dspeed\x2dadjust.slice.
[ 14.803202] cryptodev: driver 1.6 loaded.
[ 14.814545] systemd[1]: Created slice Python2's slice.
[ 14.820643] systemd[1]: Starting Python2's slice.
[ 14.827124] systemd[1]: Created slice RAID Resync Process. Including Resync, Repair and Reshape..
[ 14.837002] systemd[1]: Starting RAID Resync Process. Including Resync, Repair and Reshape..
[ 14.846979] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 14.856603] systemd[1]: Created slice User and Session Slice.
[ 14.863793] systemd[1]: Starting User and Session Slice.
[ 14.870525] systemd[1]: Reached target Slices.
[ 14.876240] systemd[1]: Starting Slices.
[ 14.881897] systemd[1]: Created slice WordPress's slice.
[ 14.883647] flashcache_syno: flashcache-1.0-syno-v25-pin-file-2022-04-01-16:22-debug initialized
[ 14.898434] systemd[1]: Starting WordPress's slice.
[ 14.905119] systemd[1]: Created slice OpenBSD Secure Shell server.
[ 14.912213] systemd[1]: Starting OpenBSD Secure Shell server.
[ 14.919350] NET: Registered protocol family 10
[ 14.925220] systemd[1]: Created slice SynologyApplicationService's slice.
[ 14.933259] systemd[1]: Starting SynologyApplicationService's slice.
[ 14.942878] systemd[1]: Mounting Debug File System...
[ 14.948957] systemd[1]: Reached target Timers.
[ 14.951379] sit: IPv6 over IPv4 tunneling driver
[ 14.959250] systemd[1]: Starting Timers.
[ 14.964621] systemd[1]: Reached target Swap.
[ 14.970178] systemd[1]: Starting Swap.
[ 14.975719] systemd[1]: Created slice SynoFinder's slice.
[ 14.982083] systemd[1]: Starting SynoFinder's slice.
[ 14.990110] systemd[1]: Mounted Debug File System.
[ 14.996102] systemd[1]: Mounted Temporary Directory.
[ 15.003088] systemd[1]: Started Synology Task Scheduler Init.
[ 15.010180] systemd[1]: Started Set time zone information to kernel.
[ 15.017905] systemd[1]: Started Set hostname.
[ 15.023640] systemd[1]: Started Set boot sequence config.
[ 15.028282] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.028511] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 15.028707] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 15.028913] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 15.029182] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 15.031607] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.033559] zram: Created 4 device(s) ...
[ 15.042446] usbcore: registered new interface driver usb-storage
[ 15.083065] systemd[1]: Started unbind USB device.
[ 15.089136] systemd[1]: Started check integrity of rd.gz decompression.
[ 15.097212] systemd[1]: Started Link coredump path to volume if possible.
[ 15.104975] systemd[1]: Listening on Journal Socket (/dev/log).
[ 15.112712] systemd[1]: Started Load Kernel Modules.
[ 15.119034] systemd[1]: Started Disabling fan checking flag ....
[ 15.126590] systemd[1]: Started Load ntb_brd module.
[ 15.134494] systemd[1]: Mounting Configuration File System...
[ 15.142460] systemd[1]: Starting Adjust NIC sequence...
[ 15.150436] systemd[1]: Starting Apply default and user customized sysctl.conf kernel variable....
[ 15.161913] md: md1 stopped.
[ 15.162548] systemd[1]: Starting Load Kernel Modules in Kernel Project...
[ 15.175053] systemd[1]: Starting Load Fan Modules in Kernel Project...
[ 15.182336] systemd[1]: Mounted FUSE Control File System.
[ 15.188902] systemd[1]: Reached target Sockets.
[ 15.193831] usbcore: registered new interface driver usblp
[ 15.194634] md: bind
[ 15.194858] md: bind
[ 15.195125] md: bind
[ 15.195321] md: bind
[ 15.201046] md: bind
[ 15.203551] md/raid1:md1: active with 5 out of 5 mirrors
[ 15.209104] md1: detected capacity change from 0 to 2147418112
[ 15.210494] md1: unknown partition table
[ 15.221995] usbcore: registered new interface driver usbhid
[ 15.221997] usbhid: USB HID core driver
[ 15.233749] synobios open /dev/ttyS1 success
[ 15.233752] Synobios DS1515 GPIO initialized
[ 15.233901] correction with 0x00
[ 15.239844] 2022-7-14 3:59:29 UTC
[ 15.239847] synobios: load, major number 201
[ 15.239852] Brand: Synology
[ 15.239854] Model: DS-1515
[ 15.239857] set group disks wakeup number to 5, spinup time deno 1
[ 15.239864] synobios cpu_arch proc entry initialized
[ 15.239868] synobios crypto_hw proc entry initialized
[ 15.239873] synobios syno_platform proc entry initialized
[ 15.309467] systemd[1]: Starting Sockets.
[ 15.316585] systemd[1]: Starting Journal Service...
[ 15.322631] systemd[1]: Reached target Local File Systems.
[ 15.329331] systemd[1]: Starting Local File Systems.
[ 15.337405] systemd[1]: Starting D-Bus Session Message Bus...
[ 15.341779] systemd-journald[3272]: Failed to join audit multicast group. The kernel is probably too old or multicast reading is not supported. Ignoring: Operation not permitted
[ 15.363195] systemd[1]: Starting D-Bus System Message Bus...
[ 15.371765] systemd[1]: Starting Set boot sequence config for temporary use...
[ 15.381706] systemd[1]: Starting udev Coldplug all Devices...
[ 15.390273] systemd[1]: Starting Mount usb fs...
[ 15.404604] systemd[1]: Mounted Configuration File System.
[ 15.411971] systemd[1]: Started Adjust NIC sequence.
[ 15.418095] systemd[1]: Started Apply default and user customized sysctl.conf kernel variable..
[ 15.428240] systemd[1]: Started Load Kernel Modules in Kernel Project.
[ 15.436198] systemd[1]: Started Load Fan Modules in Kernel Project.
[ 15.447967] systemd[1]: Started Set boot sequence config for temporary use.
[ 15.455925] systemd[1]: Started Journal Service.
[ 15.501552] systemd-journald[3272]: Received request to flush runtime journal from PID 1
[ 15.714467] Adding 2097056k swap on /dev/md1. Priority:-1 extents:1 across:2097056k
[ 15.729404] Adding 313312k swap on /dev/zram0. Priority:1 extents:1 across:313312k SS
[ 15.745788] Adding 313312k swap on /dev/zram1. Priority:1 extents:1 across:313312k SS
[ 15.762126] Adding 313312k swap on /dev/zram2. Priority:1 extents:1 across:313312k SS
[ 15.777664] Adding 313312k swap on /dev/zram3. Priority:1 extents:1 across:313312k SS
[ 20.090857] configured MAC to SGMII mode:
[ 20.094863] eth [al_eth_0]: set auto negotiation to enable
[ 20.100923] al_eth 0000:00:00.0 eth0: using MSI-X per Queue interrupt mode
[ 20.113077] libphy: al mdio bus: probed
[ 20.116976] al_eth 0000:00:00.0 eth0: phy[4]: device 0:04, driver RTL8211DN Gigabit Ethernet
[ 20.125448] al_eth 0000:00:00.0 eth0: phy[4]:supported 2ff adv 2ff
[ 20.131799] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.079254] configured MAC to SGMII mode:
[ 21.083280] eth [al_eth_1]: set auto negotiation to enable
[ 21.089453] al_eth 0000:00:01.0 eth1: using MSI-X per Queue interrupt mode
[ 21.131229] libphy: al mdio bus: probed
[ 21.135084] al_eth 0000:00:01.0 eth1: phy[1]: device 8:01, driver RTL8211DN Gigabit Ethernet
[ 21.135088] al_eth 0000:00:01.0 eth1: phy[1]:supported 2ff adv 2ff
[ 21.135167] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.394125] configured MAC to SGMII mode:
[ 21.398130] eth [al_eth_2]: set auto negotiation to enable
[ 21.404107] al_eth 0000:00:02.0 eth2: using MSI-X per Queue interrupt mode
[ 21.413727] libphy: al mdio bus: probed
[ 21.417578] al_eth 0000:00:02.0 eth2: phy[2]: device 10:02, driver RTL8211DN Gigabit Ethernet
[ 21.426118] al_eth 0000:00:02.0 eth2: phy[2]:supported 2ff adv 2ff
[ 21.432378] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 21.442155] md: md3 stopped.
[ 21.481502] md: bind
[ 21.484498] md: bind
[ 21.491045] md: bind
[ 21.579587] configured MAC to SGMII mode:
[ 21.583608] eth [al_eth_3]: set auto negotiation to enable
[ 21.589609] al_eth 0000:00:03.0 eth3: using MSI-X per Queue interrupt mode
[ 21.599465] libphy: al mdio bus: probed
[ 21.603330] al_eth 0000:00:03.0 eth3: phy[3]: device 18:03, driver RTL8211DN Gigabit Ethernet
[ 21.611855] al_eth 0000:00:03.0 eth3: phy[3]:supported 2ff adv 2ff
[ 21.618095] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 21.670820] raid6: int32x1 gen() 807 MB/s
[ 21.840883] raid6: int32x1 xor() 315 MB/s
[ 22.010876] raid6: int32x2 gen() 546 MB/s
[ 22.180829] raid6: int32x2 xor() 330 MB/s
[ 22.350849] raid6: int32x4 gen() 708 MB/s
[ 22.520787] raid6: int32x4 xor() 347 MB/s
[ 22.690868] raid6: int32x8 gen() 638 MB/s
[ 22.860833] raid6: int32x8 xor() 327 MB/s
[ 22.865094] raid6: using algorithm int32x1 gen() (807 MB/s)
[ 22.870651] raid6: .... xor() 315 MB/s, rmw enabled
[ 22.875528] raid6: using intx1 recovery algorithm
[ 22.901318] async_tx: api initialized (async)
[ 22.918023] xor: measuring software checksum speed
[ 23.020803] arm4regs : 1516.800 MB/sec
[ 23.120781] 8regs : 1257.600 MB/sec
[ 23.220782] 32regs : 1174.400 MB/sec
[ 23.224979] xor: using function: arm4regs (1516.800 MB/sec)
[ 23.326267] md: raid6 personality registered for level 6
[ 23.331607] md: raid5 personality registered for level 5
[ 23.336912] md: raid4 personality registered for level 4
[ 23.342241] md: raidF1 personality registered for level 45
[ 23.352916] md/raid:md3: device sdc3 operational as raid disk 0
[ 23.358835] md/raid:md3: device sde3 operational as raid disk 2
[ 23.364784] md/raid:md3: device sdd3 operational as raid disk 1
[ 23.372018] md/raid:md3: allocated 24734kB
[ 23.411065] md/raid:md3: raid level 5 active with 3 out of 3 devices, algorithm 2
[ 23.418537] RAID conf printout:
[ 23.418543] --- level:5 rd:3 wd:3
[ 23.418550] disk 0, o:1, dev:sdc3
[ 23.418555] disk 1, o:1, dev:sdd3
[ 23.418560] disk 2, o:1, dev:sde3
[ 23.434389] md3: detected capacity change from 0 to 3978834345984
[ 23.489869] md3: unknown partition table
[ 23.510990] md: md2 stopped.
[ 23.584619] md: bind
[ 23.591872] md: bind
[ 23.611585] md/raid1:md2: active with 2 out of 2 mirrors
[ 23.626967] md2: detected capacity change from 0 to 1989417172992
[ 23.634944] md2: unknown partition table
[ 23.881547] eth [al_eth_0]: set auto negotiation to enable
[ 23.887087] libphy: 0:04 - Link is Up - 1000/Full
[ 23.892129] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.795284] bio: create slab at 1
[ 26.406869] flashcache_syno: /dev/vg2/volume_2 exclude check success
[ 26.435192] flashcache_syno: /dev/vg1/volume_1 exclude check success
[ 27.524449] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,oldalloc
[ 27.671870] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,oldalloc
[ 31.658317] Synotify use 16384 event queue size
[ 31.663116] Synotify use 16384 event queue size
[ 32.617946] ata1.00: configured for UDMA/133
[ 32.622236] ata1: EH complete
[ 32.893089] ata2.00: configured for UDMA/133
[ 32.897369] ata2: EH complete
[ 33.126357] ata3.00: configured for UDMA/133
[ 33.130655] ata3: EH complete
[ 33.347037] ata4.00: configured for UDMA/133
[ 33.351318] ata4: EH complete
[ 33.549926] ata5.00: configured for UDMA/133
[ 33.554234] ata5: EH complete
[ 34.450228] warning:
nginx' uses 32-bit capabilities (legacy support in use) [ 34.451536] warning:nginx' uses 32-bit capabilities (legacy support in use)[ 37.041947] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(e31164b9bbd2).
[ 37.081326] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[ 37.127507] iSCSI:target_core_device.c:613:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967232
[ 37.139380] iSCSI:target_core_configfs.c:5777:target_init_dbroot db_root: cannot open: /etc/target
[ 37.148733] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 16777216 bytes successfully
[ 37.206935] iSCSI:target_core_file.c:152:fd_attach_hba RODSP plugin for fileio is enabled.
[ 37.215198] iSCSI:target_core_file.c:159:fd_attach_hba ODX Token Manager is enabled.
[ 37.222990] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[ 37.231972] iSCSI:target_core_ep.c:795:ep_attach_hba RODSP plugin for epio is enabled.
[ 37.239872] iSCSI:target_core_ep.c:802:ep_attach_hba ODX Token Manager is enabled.
[ 37.485468] workqueue: max_active 1024 requested for vhost_scsi is out of range, clamping between 1 and 512
[ 39.175287] 8021q: 802.1Q VLAN Support v1.8
[ 39.711002] findhostd uses obsolete (PF_INET,SOCK_PACKET)
[ 39.757005] r8152: module verification failed: signature and/or required key missing - tainting kernel
[ 39.767217] usbcore: registered new interface driver r8152
[ 43.769625] fuse init (API version 7.22)
[ 64.758695] Synotify use 16384 event queue size
[ 71.779366] Synotify use 16384 event queue size
[ 83.961290] libphy: 0:04 - Link is Down
[ 122.775000] usb 2-1: USB disconnect, device number 2
[ 126.831162] usb 2-1: new SuperSpeed USB device number 3 using etxhci_hcd-170202
[ 266.961595] eth [al_eth_0]: set auto negotiation to enable
[ 266.967071] libphy: 0:04 - Link is Up - 1000/Full
[ 490.377618] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 3 ret -71
[ 490.379616] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -71
[ 490.381608] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -71
[ 490.383615] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -71
[ 490.385614] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -71
[ 490.387615] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 5 ret -71
[ 490.389614] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
[ 490.391612] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
[ 490.393615] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 2 ret -71
[ 490.395614] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 3 ret -71
[ 490.397613] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd usbhid-ups rqt 161 rq 1 len 4 ret -71
[ 491.411049] usb 1-2: USB disconnect, device number 2
[ 495.274336] usb 2-1: USB disconnect, device number 3
[ 498.761271] usb 2-2: new SuperSpeed USB device number 4 using etxhci_hcd-170202
[ 1404.654975] Synotify use 16384 event queue size
[ 1915.651685] usb 2-2: USB disconnect, device number 4
[ 1923.231397] usb 1-2: new full-speed USB device number 3 using etxhci_hcd-170202
[ 1923.271703] usb 1-2: ep 0x81 - rounding interval to 512 microframes, ep desc says 800 microframes
[ 1932.991772] libphy: 0:04 - Link is Down
[ 1934.992036] eth [al_eth_0]: set auto negotiation to enable
[ 1934.997512] libphy: 0:04 - Link is Up - 1000/Full
[ 2319.001859] libphy: 0:04 - Link is Down
[ 2332.002140] eth [al_eth_0]: set auto negotiation to enable
[ 2332.007616] libphy: 0:04 - Link is Up - 1000/Full
[139138.038241] usb 2-1: new SuperSpeed USB device number 5 using etxhci_hcd-170202
[140735.357407] usb 2-1: USB disconnect, device number 5
[140754.858696] usb 2-1: new SuperSpeed USB device number 6 using etxhci_hcd-170202
Output of
lsusbcommand|__usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0002:01:00.0) hub
|__1-2 051d:0002:0090 00 2.00 12MBit/s 2mA 1IF (American Power Conversion Back-UPS RS 1500MS FW:952.e3 .D USB FW:e3 3B1822X24805 )
|__usb2 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (Linux 3.10.108 etxhci_hcd-170202 Etron xHCI Host Controller 0002:01:00.0) hub
|__2-1 20f4:e02c:3100 00 3.20 5000MBit/s 256mA 2IFs (TRENDnet TUC-ET2G(v2.0R) 0013000001)
Output of
ifconfig -acommandeth0 Link encap:Ethernet HWaddr xxxxxxxxxxxx
inet addr:192.168.xx.1 Bcast:192.168.xx.255 Mask:255.255.255.0
inet6 addr: xxxxxxxxxxxx/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:239341 errors:0 dropped:0 overruns:0 frame:0
TX packets:438787 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:43088279 (41.0 MiB) TX bytes:618224010 (589.5 MiB)
eth1 Link encap:Ethernet HWaddr xxxxxxxxxx
inet addr:169.254.187.20 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth2 Link encap:Ethernet HWaddr xxxxxxxxxx
inet addr:169.254.48.48 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
eth3 Link encap:Ethernet HWaddr xxxxxxxxxxxx
inet addr:169.254.40.88 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:11960 errors:0 dropped:0 overruns:0 frame:0
TX packets:11960 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1801404 (1.7 MiB) TX bytes:1801404 (1.7 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
The text was updated successfully, but these errors were encountered: