No gyro found

[TheIsotopes]

Describe the bug

latest master makes probs with MATEKF405TEMINI.

• gyro was not found
• vbat_scale was set to 110 but should be 210 (on TODO)
• system_hse_mhz was set to 0 but should be 8

EDIT: Did some research now and found that #12425 is the culprit.
since #12425 was merged the problem begins ... a merged pr before and everything is fine.
@blckmn pls can you check this.

EDIT2: found incorrect setting in resource SPI_MISO 3 B04 it's same as resource SPI_MISO 1 B04
if i'm set resource SPI_MISO 3 NONE as before the fc is working again

hmm ... resource SPI_MOSI 3 B05 should also resource SPI_MOSI 3 NONE

According to this, resource SPI_SCK 3 B03 should also be set to resource SPI_SCK 3 NONE

no idea where the setting comes from, nothing found in config.h

EDIT3: found the settings in platform_mcu.h
imo the definitions of spi 1-6 should be removed in platform_mcu.h because they are set in config.h

@haslinghuis @blckmn Are you compliant with this or does this create new problems?

To Reproduce

using latest master on MATEKF405TEMINI

Expected behavior

working fc without probs

Support ID

Id: "52ea3a87-2f3c-4de7-bafe-d5b6f5d0c782"

Flight controller

MATEKF405TEMINI

Other components

No response

How are the different components wired up (including port information)

No response

Add any other context about the problem that you think might be relevant here

No response

[haslinghuis]

@TheIsotopes Thanks for the detailed report.