revoltosd and OmniNXTF4 flash does not show up on Betaflight 4.4 #12643

oyvinla · 2023-04-09T10:08:52Z

Describe the bug

When flashing 4.4.0 or 4.4.1 on the RevoltOSD and the OmniNXTF4 boards, the flash memory does not show up. when flashing back to 4.3.2, the flash memory is available on both boards.

When flashing the Core only to the revoltosd, the flash memory is available, but when I flash the normal 4.4.1 again, the flash memory is not available.

I have tried adding the different flash memory configs like described in this post for the revoldtosd board without any luck
#12082

Thanks

To Reproduce

Flash BF 4.4

Expected behavior

Flash Memory for Blackbox should be available

Support ID

version
# Betaflight / STM32F405 (S405) 4.4.1 Apr  8 2023 / 14:16:55 (e43d591b2) MSP API: 1.45

# config: YES
# board: manufacturer_id: FLON, board_name: REVOLTOSD

# status
MCU F40X Clock=168MHz (PLLP-HSE), Vref=3.30V, Core temp=40degC
Stack size: 2048, Stack address: 0x1000fff0
Configuration: CONFIGURED, size: 4167, max available: 16384
Devices detected: SPI:1, I2C:0
Gyros detected: gyro 1
GYRO=ICM20602, ACC=ICM20602
OSD: MAX7456 (30 x 13)
BUILD KEY: d0a2b860851005fc19f5922a1d9c3c21 (4.4.1)
System Uptime: 12 seconds, Current Time: 2023-04-09T10:05:04.381+00:00
CPU:43%, cycle time: 125, GYRO rate: 8000, RX rate: 15, System rate: 9
Voltage: 0 * 0.01V (0S battery - NOT PRESENT)
I2C Errors: 0
SD card: Not configured
FLASH: JEDEC ID=0x00ef4018 16M
Arming disable flags: RXLOSS ANGLE CLI MSP MOTOR_PROTO

# flash_info
Flash sectors=256, sectorSize=65536, pagesPerSector=256, pageSize=256, totalSize=16777216 JEDEC ID=0x00ef4018
Partitions:
  0: FLASHFS   0 255
FlashFS size=16777216, usedSize=24576

# dump hardware

# version
# Betaflight / STM32F405 (S405) 4.4.1 Apr  8 2023 / 14:16:55 (e43d591b2) MSP API: 1.45

# config: YES

# start the command batch
batch start

board_name REVOLTOSD
manufacturer_id FLON

# resources
resource BEEPER 1 B04
resource MOTOR 1 B00
resource MOTOR 2 B01
resource MOTOR 3 A03
resource MOTOR 4 A02
resource MOTOR 5 NONE
resource MOTOR 6 NONE
resource MOTOR 7 NONE
resource MOTOR 8 NONE
resource SERVO 1 NONE
resource SERVO 2 NONE
resource SERVO 3 NONE
resource SERVO 4 NONE
resource SERVO 5 NONE
resource SERVO 6 NONE
resource SERVO 7 NONE
resource SERVO 8 NONE
resource PPM 1 NONE
resource PWM 1 NONE
resource PWM 2 NONE
resource PWM 3 NONE
resource PWM 4 NONE
resource PWM 5 NONE
resource PWM 6 NONE
resource PWM 7 NONE
resource PWM 8 NONE
resource SONAR_TRIGGER 1 NONE
resource SONAR_ECHO 1 NONE
resource LED_STRIP 1 B06
resource SERIAL_TX 1 A09
resource SERIAL_TX 2 NONE
resource SERIAL_TX 3 B10
resource SERIAL_TX 4 A00
resource SERIAL_TX 5 NONE
resource SERIAL_TX 6 C06
resource SERIAL_TX 7 NONE
resource SERIAL_TX 8 NONE
resource SERIAL_TX 9 NONE
resource SERIAL_TX 10 NONE
resource SERIAL_TX 11 NONE
resource SERIAL_TX 12 NONE
resource SERIAL_RX 1 A10
resource SERIAL_RX 2 NONE
resource SERIAL_RX 3 B11
resource SERIAL_RX 4 A01
resource SERIAL_RX 5 NONE
resource SERIAL_RX 6 C07
resource SERIAL_RX 7 NONE
resource SERIAL_RX 8 NONE
resource SERIAL_RX 9 NONE
resource SERIAL_RX 10 NONE
resource SERIAL_RX 11 NONE
resource SERIAL_RX 12 NONE
resource INVERTER 1 C00
resource INVERTER 2 NONE
resource INVERTER 3 NONE
resource INVERTER 4 NONE
resource INVERTER 5 NONE
resource INVERTER 6 NONE
resource INVERTER 7 NONE
resource INVERTER 8 NONE
resource INVERTER 9 NONE
resource INVERTER 10 NONE
resource INVERTER 11 NONE
resource INVERTER 12 NONE
resource I2C_SCL 1 B08
resource I2C_SCL 2 NONE
resource I2C_SCL 3 NONE
resource I2C_SDA 1 B09
resource I2C_SDA 2 NONE
resource I2C_SDA 3 NONE
resource LED 1 B05
resource LED 2 NONE
resource LED 3 NONE
resource RX_BIND 1 NONE
resource RX_BIND_PLUG 1 NONE
resource TRANSPONDER 1 NONE
resource SPI_SCK 1 A05
resource SPI_SCK 2 B13
resource SPI_SCK 3 C10
resource SPI_MISO 1 A06
resource SPI_MISO 2 B14
resource SPI_MISO 3 C11
resource SPI_MOSI 1 A07
resource SPI_MOSI 2 B15
resource SPI_MOSI 3 C12
resource ESCSERIAL 1 C06
resource ADC_BATT 1 C02
resource ADC_RSSI 1 NONE
resource ADC_CURR 1 C01
resource ADC_EXT 1 NONE
resource BARO_CS 1 NONE
resource BARO_EOC 1 NONE
resource BARO_XCLR 1 NONE
resource COMPASS_CS 1 NONE
resource COMPASS_EXTI 1 NONE
resource SDCARD_CS 1 NONE
resource SDCARD_DETECT 1 NONE
resource PINIO 1 NONE
resource PINIO 2 NONE
resource PINIO 3 NONE
resource PINIO 4 NONE
resource USB_MSC_PIN 1 NONE
resource FLASH_CS 1 B03
resource OSD_CS 1 D02
resource RX_SPI_CS 1 NONE
resource RX_SPI_EXTI 1 NONE
resource RX_SPI_BIND 1 NONE
resource RX_SPI_LED 1 NONE
resource RX_SPI_CC2500_TX_EN 1 NONE
resource RX_SPI_CC2500_LNA_EN 1 NONE
resource RX_SPI_CC2500_ANT_SEL 1 NONE
resource RX_SPI_EXPRESSLRS_RESET 1 NONE
resource RX_SPI_EXPRESSLRS_BUSY 1 NONE
resource GYRO_EXTI 1 C04
resource GYRO_EXTI 2 NONE
resource GYRO_CS 1 A04
resource GYRO_CS 2 NONE
resource USB_DETECT 1 C05
resource VTX_POWER 1 NONE
resource VTX_CS 1 NONE
resource VTX_DATA 1 NONE
resource VTX_CLK 1 NONE
resource PULLUP 1 NONE
resource PULLUP 2 NONE
resource PULLUP 3 NONE
resource PULLUP 4 NONE
resource PULLDOWN 1 NONE
resource PULLDOWN 2 NONE
resource PULLDOWN 3 NONE
resource PULLDOWN 4 NONE

# timer
timer B09 AF3
# pin B09: TIM11 CH1 (AF3)
timer B00 AF3
# pin B00: TIM8 CH2N (AF3)
timer B01 AF3
# pin B01: TIM8 CH3N (AF3)
timer A03 AF1
# pin A03: TIM2 CH4 (AF1)
timer A02 AF1
# pin A02: TIM2 CH3 (AF1)
timer B06 AF2
# pin B06: TIM4 CH1 (AF2)

# dma
dma SPI_MOSI 1 NONE
dma SPI_MOSI 2 NONE
dma SPI_MOSI 3 NONE
dma SPI_MISO 1 NONE
dma SPI_MISO 2 NONE
dma SPI_MISO 3 NONE
dma SPI_TX 1 NONE
dma SPI_TX 2 NONE
dma SPI_TX 3 NONE
dma SPI_RX 1 NONE
dma SPI_RX 2 NONE
dma SPI_RX 3 NONE
dma ADC 1 1
# ADC 1: DMA2 Stream 4 Channel 0
dma ADC 2 NONE
dma ADC 3 NONE
dma UART_TX 1 NONE
dma UART_TX 2 NONE
dma UART_TX 3 NONE
dma UART_TX 4 NONE
dma UART_TX 5 NONE
dma UART_TX 6 NONE
dma UART_TX 7 NONE
dma UART_TX 8 NONE
dma UART_RX 1 NONE
dma UART_RX 2 NONE
dma UART_RX 3 NONE
dma UART_RX 4 NONE
dma UART_RX 5 NONE
dma UART_RX 6 NONE
dma UART_RX 7 NONE
dma UART_RX 8 NONE
dma pin B09 NONE
dma pin B00 0
# pin B00: DMA2 Stream 2 Channel 0
dma pin B01 0
# pin B01: DMA2 Stream 2 Channel 0
dma pin A03 0
# pin A03: DMA1 Stream 7 Channel 3
dma pin A02 0
# pin A02: DMA1 Stream 1 Channel 3
dma pin B06 0
# pin B06: DMA1 Stream 0 Channel 2

# feature
feature -RX_PPM
feature -INFLIGHT_ACC_CAL
feature -RX_SERIAL
feature -MOTOR_STOP
feature -SERVO_TILT
feature -SOFTSERIAL
feature -GPS
feature -RANGEFINDER
feature -TELEMETRY
feature -3D
feature -RX_PARALLEL_PWM
feature -RX_MSP
feature -RSSI_ADC
feature -LED_STRIP
feature -DISPLAY
feature -OSD
feature -CHANNEL_FORWARDING
feature -TRANSPONDER
feature -AIRMODE
feature -RX_SPI
feature -ESC_SENSOR
feature -ANTI_GRAVITY
feature RX_SERIAL
feature OSD
feature AIRMODE
feature ANTI_GRAVITY

# serial
serial 20 1 115200 57600 0 115200
serial 0 0 115200 57600 0 115200
serial 2 0 115200 57600 0 115200
serial 3 0 115200 57600 0 115200
serial 5 0 115200 57600 0 115200

# master
set gyro_to_use = FIRST
set align_mag = DEFAULT
set mag_align_roll = 0
set mag_align_pitch = 0
set mag_align_yaw = 0
set mag_bustype = SPI
set mag_i2c_device = 0
set mag_i2c_address = 0
set mag_spi_device = 0
set baro_bustype = SPI
set baro_spi_device = 0
set baro_i2c_device = 0
set baro_i2c_address = 0
set rx_spi_protocol = V202_250K
set rx_spi_bus = 0
set rx_spi_led_inversion = OFF
set adc_device = 1
set blackbox_device = SERIAL
set dshot_burst = ON
set dshot_bitbang = AUTO
set dshot_bitbang_timer = AUTO
set current_meter = VIRTUAL
set battery_meter = NONE
set vbat_scale = 110
set ibata_scale = 400
set beeper_inversion = OFF
set beeper_od = ON
set beeper_frequency = 0
set sdcard_detect_inverted = OFF
set sdcard_mode = OFF
set sdcard_spi_bus = 0
set sdio_clk_bypass = OFF
set sdio_use_cache = OFF
set sdio_use_4bit_width = OFF
set system_hse_mhz = 8
set vtx_spi_bus = 0
set max7456_clock = NOMINAL
set max7456_spi_bus = 2
set max7456_preinit_opu = OFF
set cc2500_spi_chip_detect = ON
set led_inversion = 0
set dashboard_i2c_bus = 1
set dashboard_i2c_addr = 60
set pinio_config = 1,1,1,1
set pinio_box = 255,255,255,255
set usb_msc_pin_pullup = ON
set flash_spi_bus = 2
set gyro_1_bustype = SPI
set gyro_1_spibus = 1
set gyro_1_i2cBus = 0
set gyro_1_i2c_address = 0
set gyro_1_sensor_align = CW0
set gyro_1_align_roll = 0
set gyro_1_align_pitch = 0
set gyro_1_align_yaw = 0
set gyro_2_bustype = SPI
set gyro_2_spibus = 0
set gyro_2_i2cBus = 0
set gyro_2_i2c_address = 0
set gyro_2_sensor_align = CW0
set gyro_2_align_roll = 0
set gyro_2_align_pitch = 0
set gyro_2_align_yaw = 0
set i2c1_pullup = OFF
set i2c1_clockspeed_khz = 800
set i2c2_pullup = OFF
set i2c2_clockspeed_khz = 800
set i2c3_pullup = OFF
set i2c3_clockspeed_khz = 800
set mco2_on_pc9 = OFF
set scheduler_relax_rx = 25
set scheduler_relax_osd = 25
set box_user_1_name = -
set box_user_2_name = -
set box_user_3_name = -
set box_user_4_name = -

# end the command batch
batch end

#

Flight controller

RevoltOSD / OMNINXTF4

Other components

No response

How are the different components wired up (including port information)

No response

Add any other context about the problem that you think might be relevant here

No response

oyvinla · 2023-04-09T13:46:21Z

Here is the support data for the omninxt4

version

Betaflight / STM32F405 (S405) 4.4.1 Apr 9 2023 / 06:39:43 (`e43d591`) MSP API: 1.45

config: YES

board: manufacturer_id: AIRB, board_name: OMNINXT4

status

MCU F40X Clock=168MHz (PLLP-HSE), Vref=3.34V, Core temp=42degC
Stack size: 2048, Stack address: 0x1000fff0
Configuration: CONFIGURED, size: 4167, max available: 16384
Devices detected: SPI:2, I2C:0
Gyros detected: gyro 1, gyro 2 shared
GYRO=MPU6000, ACC=MPU6000, BARO=LPS
OSD: MAX7456 (30 x 13)
BUILD KEY: 00f3b553ac2c0bc8c506e8aede35718b (4.4.1)
System Uptime: 12 seconds, Current Time: 2023-04-09T13:41:01.210+00:00
CPU:41%, cycle time: 125, GYRO rate: 8000, RX rate: 15, System rate: 9
Voltage: 3 * 0.01V (0S battery - NOT PRESENT)
I2C Errors: 1
SD card: Not configured
FLASH: JEDEC ID=0x00ef4018 16M
Arming disable flags: RXLOSS CLI MSP MOTOR_PROTO

flash_info

Flash sectors=256, sectorSize=65536, pagesPerSector=256, pageSize=256, totalSize=16777216 JEDEC ID=0x00ef4018
Partitions:
0: FLASHFS 0 255
FlashFS size=16777216, usedSize=4421632

dump hardware

version

Betaflight / STM32F405 (S405) 4.4.1 Apr 9 2023 / 06:39:43 (`e43d591`) MSP API: 1.45

config: YES

start the command batch

batch start

board_name OMNINXT4
manufacturer_id AIRB

resources

resource BEEPER 1 C13
resource MOTOR 1 B05
resource MOTOR 2 B04
resource MOTOR 3 B00
resource MOTOR 4 B01
resource MOTOR 5 NONE
resource MOTOR 6 NONE
resource MOTOR 7 NONE
resource MOTOR 8 NONE
resource SERVO 1 NONE
resource SERVO 2 NONE
resource SERVO 3 NONE
resource SERVO 4 NONE
resource SERVO 5 NONE
resource SERVO 6 NONE
resource SERVO 7 NONE
resource SERVO 8 NONE
resource PPM 1 B07
resource PWM 1 NONE
resource PWM 2 NONE
resource PWM 3 NONE
resource PWM 4 NONE
resource PWM 5 NONE
resource PWM 6 NONE
resource PWM 7 NONE
resource PWM 8 NONE
resource SONAR_TRIGGER 1 NONE
resource SONAR_ECHO 1 NONE
resource LED_STRIP 1 A09
resource SERIAL_TX 1 B06
resource SERIAL_TX 2 A02
resource SERIAL_TX 3 B10
resource SERIAL_TX 4 A00
resource SERIAL_TX 5 NONE
resource SERIAL_TX 6 C06
resource SERIAL_TX 7 NONE
resource SERIAL_TX 8 NONE
resource SERIAL_TX 9 NONE
resource SERIAL_TX 10 NONE
resource SERIAL_TX 11 NONE
resource SERIAL_TX 12 NONE
resource SERIAL_RX 1 B07
resource SERIAL_RX 2 A03
resource SERIAL_RX 3 B11
resource SERIAL_RX 4 A01
resource SERIAL_RX 5 D02
resource SERIAL_RX 6 C07
resource SERIAL_RX 7 NONE
resource SERIAL_RX 8 NONE
resource SERIAL_RX 9 NONE
resource SERIAL_RX 10 NONE
resource SERIAL_RX 11 NONE
resource SERIAL_RX 12 NONE
resource INVERTER 1 NONE
resource INVERTER 2 C05
resource INVERTER 3 NONE
resource INVERTER 4 NONE
resource INVERTER 5 NONE
resource INVERTER 6 NONE
resource INVERTER 7 NONE
resource INVERTER 8 NONE
resource INVERTER 9 NONE
resource INVERTER 10 NONE
resource INVERTER 11 NONE
resource INVERTER 12 NONE
resource I2C_SCL 1 B08
resource I2C_SCL 2 NONE
resource I2C_SCL 3 NONE
resource I2C_SDA 1 B09
resource I2C_SDA 2 NONE
resource I2C_SDA 3 NONE
resource LED 1 B02
resource LED 2 NONE
resource LED 3 NONE
resource RX_BIND 1 NONE
resource RX_BIND_PLUG 1 NONE
resource TRANSPONDER 1 NONE
resource SPI_SCK 1 A05
resource SPI_SCK 2 B13
resource SPI_SCK 3 C10
resource SPI_MISO 1 A06
resource SPI_MISO 2 B14
resource SPI_MISO 3 C11
resource SPI_MOSI 1 A07
resource SPI_MOSI 2 C03
resource SPI_MOSI 3 C12
resource ESCSERIAL 1 B07
resource ADC_BATT 1 C00
resource ADC_RSSI 1 C04
resource ADC_CURR 1 C01
resource ADC_EXT 1 A04
resource BARO_CS 1 A10
resource BARO_EOC 1 NONE
resource BARO_XCLR 1 NONE
resource COMPASS_CS 1 NONE
resource COMPASS_EXTI 1 NONE
resource SDCARD_CS 1 NONE
resource SDCARD_DETECT 1 NONE
resource PINIO 1 NONE
resource PINIO 2 NONE
resource PINIO 3 NONE
resource PINIO 4 NONE
resource USB_MSC_PIN 1 NONE
resource FLASH_CS 1 C14
resource OSD_CS 1 A15
resource RX_SPI_CS 1 NONE
resource RX_SPI_EXTI 1 NONE
resource RX_SPI_BIND 1 NONE
resource RX_SPI_LED 1 NONE
resource RX_SPI_CC2500_TX_EN 1 NONE
resource RX_SPI_CC2500_LNA_EN 1 NONE
resource RX_SPI_CC2500_ANT_SEL 1 NONE
resource RX_SPI_EXPRESSLRS_RESET 1 NONE
resource RX_SPI_EXPRESSLRS_BUSY 1 NONE
resource GYRO_EXTI 1 NONE
resource GYRO_EXTI 2 NONE
resource GYRO_CS 1 B12
resource GYRO_CS 2 A08
resource USB_DETECT 1 NONE
resource VTX_POWER 1 NONE
resource VTX_CS 1 NONE
resource VTX_DATA 1 NONE
resource VTX_CLK 1 NONE
resource PULLUP 1 NONE
resource PULLUP 2 NONE
resource PULLUP 3 NONE
resource PULLUP 4 NONE
resource PULLDOWN 1 NONE
resource PULLDOWN 2 NONE
resource PULLDOWN 3 NONE
resource PULLDOWN 4 NONE

timer

timer B05 AF2

pin B05: TIM3 CH2 (AF2)

timer B04 AF2

pin B04: TIM3 CH1 (AF2)

timer B00 AF2

pin B00: TIM3 CH3 (AF2)

timer B01 AF2

pin B01: TIM3 CH4 (AF2)

timer C09 AF3

pin C09: TIM8 CH4 (AF3)

timer C08 AF3

pin C08: TIM8 CH3 (AF3)

timer B09 AF3

pin B09: TIM11 CH1 (AF3)

timer B08 AF3

pin B08: TIM10 CH1 (AF3)

timer B07 AF2

pin B07: TIM4 CH2 (AF2)

timer A09 AF1

pin A09: TIM1 CH2 (AF1)

timer B15 AF9

pin B15: TIM12 CH2 (AF9)

timer B06 AF2

pin B06: TIM4 CH1 (AF2)

timer A02 AF3

pin A02: TIM9 CH1 (AF3)

timer A03 AF3

pin A03: TIM9 CH2 (AF3)

timer B10 AF1

pin B10: TIM2 CH3 (AF1)

timer B11 AF1

pin B11: TIM2 CH4 (AF1)

timer A00 AF2

pin A00: TIM5 CH1 (AF2)

timer A01 AF2

pin A01: TIM5 CH2 (AF2)

timer C06 AF3

pin C06: TIM8 CH1 (AF3)

timer C07 AF3

pin C07: TIM8 CH2 (AF3)

timer A10 AF1

pin A10: TIM1 CH3 (AF1)

dma

dma SPI_MOSI 1 NONE
dma SPI_MOSI 2 NONE
dma SPI_MOSI 3 NONE
dma SPI_MISO 1 NONE
dma SPI_MISO 2 NONE
dma SPI_MISO 3 NONE
dma SPI_TX 1 NONE
dma SPI_TX 2 NONE
dma SPI_TX 3 NONE
dma SPI_RX 1 NONE
dma SPI_RX 2 NONE
dma SPI_RX 3 NONE
dma ADC 1 1

pin B05: DMA1 Stream 5 Channel 5

dma pin B04 0

pin B04: DMA1 Stream 4 Channel 5

dma pin B00 0

pin B00: DMA1 Stream 7 Channel 5

dma pin B01 0

pin B01: DMA1 Stream 2 Channel 5

dma pin C09 0

pin C09: DMA2 Stream 7 Channel 7

dma pin C08 1

pin C08: DMA2 Stream 4 Channel 7

dma pin B09 NONE
dma pin B08 NONE
dma pin B07 0

pin B07: DMA1 Stream 3 Channel 2

dma pin A09 0

pin A09: DMA2 Stream 6 Channel 0

dma pin B15 NONE
dma pin B06 0

pin B06: DMA1 Stream 0 Channel 2

dma pin A02 NONE
dma pin A03 NONE
dma pin B10 0

pin B10: DMA1 Stream 1 Channel 3

dma pin B11 0

pin B11: DMA1 Stream 7 Channel 3

dma pin A00 0

pin A00: DMA1 Stream 2 Channel 6

dma pin A01 0

pin A01: DMA1 Stream 4 Channel 6

dma pin C06 0

pin C06: DMA2 Stream 2 Channel 0

dma pin C07 1

pin C07: DMA2 Stream 3 Channel 7

dma pin A10 0

pin A10: DMA2 Stream 6 Channel 0

feature

feature -RX_PPM
feature -INFLIGHT_ACC_CAL
feature -RX_SERIAL
feature -MOTOR_STOP
feature -SERVO_TILT
feature -SOFTSERIAL
feature -GPS
feature -RANGEFINDER
feature -TELEMETRY
feature -3D
feature -RX_PARALLEL_PWM
feature -RX_MSP
feature -RSSI_ADC
feature -LED_STRIP
feature -DISPLAY
feature -OSD
feature -CHANNEL_FORWARDING
feature -TRANSPONDER
feature -AIRMODE
feature -RX_SPI
feature -ESC_SENSOR
feature -ANTI_GRAVITY
feature RX_SERIAL
feature LED_STRIP
feature OSD
feature AIRMODE
feature ANTI_GRAVITY

serial

serial 20 1 115200 57600 0 115200
serial 0 64 115200 57600 0 115200
serial 1 0 115200 57600 0 115200
serial 2 0 115200 57600 0 115200
serial 3 0 115200 57600 0 115200
serial 4 1024 115200 57600 0 115200
serial 5 0 115200 57600 0 115200

master

set gyro_to_use = FIRST
set align_mag = DEFAULT
set mag_align_roll = 0
set mag_align_pitch = 0
set mag_align_yaw = 0
set mag_bustype = I2C
set mag_i2c_device = 1
set mag_i2c_address = 0
set mag_spi_device = 0
set baro_bustype = SPI
set baro_spi_device = 2
set baro_i2c_device = 0
set baro_i2c_address = 0
set rx_spi_protocol = V202_250K
set rx_spi_bus = 0
set rx_spi_led_inversion = OFF
set adc_device = 1
set blackbox_device = SPIFLASH
set dshot_burst = ON
set dshot_bitbang = AUTO
set dshot_bitbang_timer = AUTO
set current_meter = ADC
set battery_meter = ADC
set vbat_scale = 110
set ibata_scale = 400
set beeper_inversion = ON
set beeper_od = OFF
set beeper_frequency = 0
set sdcard_detect_inverted = OFF
set sdcard_mode = OFF
set sdcard_spi_bus = 0
set sdio_clk_bypass = OFF
set sdio_use_cache = OFF
set sdio_use_4bit_width = OFF
set system_hse_mhz = 8
set vtx_spi_bus = 0
set max7456_clock = NOMINAL
set max7456_spi_bus = 2
set max7456_preinit_opu = OFF
set cc2500_spi_chip_detect = ON
set led_inversion = 0
set dashboard_i2c_bus = 1
set dashboard_i2c_addr = 60
set pinio_config = 1,1,1,1
set pinio_box = 255,255,255,255
set usb_msc_pin_pullup = ON
set flash_spi_bus = 2
set gyro_1_bustype = SPI
set gyro_1_spibus = 1
set gyro_1_i2cBus = 0
set gyro_1_i2c_address = 0
set gyro_1_sensor_align = CW0
set gyro_1_align_roll = 0
set gyro_1_align_pitch = 0
set gyro_1_align_yaw = 0
set gyro_2_bustype = SPI
set gyro_2_spibus = 1
set gyro_2_i2cBus = 0
set gyro_2_i2c_address = 0
set gyro_2_sensor_align = CW270
set gyro_2_align_roll = 0
set gyro_2_align_pitch = 0
set gyro_2_align_yaw = 2700
set i2c1_pullup = OFF
set i2c1_clockspeed_khz = 800
set i2c2_pullup = OFF
set i2c2_clockspeed_khz = 800
set i2c3_pullup = OFF
set i2c3_clockspeed_khz = 800
set mco2_on_pc9 = OFF
set scheduler_relax_rx = 25
set scheduler_relax_osd = 25
set box_user_1_name = -
set box_user_2_name = -
set box_user_3_name = -
set box_user_4_name = -

end the command batch

batch end

Fixes: #12643

haslinghuis · 2023-04-09T20:38:45Z

RevoltOSD: You can add FLASH FLASH_W25Q128FV in custom defines before flashing

Fixes: #12643

haslinghuis · 2023-04-09T20:42:46Z

Same for OMNINXT4 :)

oyvinla · 2023-04-09T20:58:33Z

Thanks, but it doesnt seem to work on either of them. I have tried both FLASH_W25Q128FV and FLASH FLASH_W25Q128FV but it still doesnt show up.

haslinghuis · 2023-04-09T21:00:31Z

Enable show release candidates and enable expert mode and try again. That bug is also resolved in latest configurator
https://github.com/betaflight/betaflight-configurator-nightlies/releases

oyvinla · 2023-04-09T21:07:17Z

Great, thanks! Got it working :)

oyvinla · 2023-04-10T07:55:49Z

BTW, its the same issue for the SynergyF4 board. and the fix is the same FLASH FLASH_W25Q128FV

fireduckfpv · 2023-04-10T11:52:23Z

Same error on OMNIBUSF4 board.

Fixes: #12643

haslinghuis · 2023-04-10T15:31:47Z

@fireduckfpv OMNIBUSF4 should already work on 4.5 without custom defines

Add W25Q128FV to OMNINXT4 Fixes: #12643

Add W25Q128FV to REVOLTOSD Fixes: #12643

Fixes: #12643

Add W25Q128FV to OMNINXT4 Fixes: betaflight#12643

Add W25Q128FV to REVOLTOSD Fixes: betaflight#12643

Fixes: betaflight#12643

oyvinla added the Template: Bug Set by auto_close_issue. label Apr 9, 2023

haslinghuis added a commit that referenced this issue Apr 9, 2023

Add W25Q128FV to REVOLTOSD

46a33cb

Fixes: #12643

haslinghuis mentioned this issue Apr 9, 2023

CONFIG: Add W25Q128FV to REVOLTOSD #12651

Merged

haslinghuis added a commit that referenced this issue Apr 9, 2023

Add W25Q128FV to OMNINXT4

8ebf254

Fixes: #12643

haslinghuis mentioned this issue Apr 9, 2023

CONFIG: Add W25Q128FV to OMNINXT4 #12652

Merged

haslinghuis added a commit that referenced this issue Apr 10, 2023

CONFIG: Add FLASH_W25Q128FV to SYNERGYF4

065367d

Fixes: #12643

haslinghuis mentioned this issue Apr 10, 2023

CONFIG: Add FLASH_W25Q128FV to SYNERGYF4 #12660

Merged

haslinghuis added Configuration Issue Please read the instructions when opening issues - instructions on how to get help are given there. and removed Template: Bug Set by auto_close_issue. labels Apr 10, 2023

blckmn pushed a commit that referenced this issue Apr 10, 2023

CONFIG: Add W25Q128FV to OMNINXT4 (#12652)

f423559

Add W25Q128FV to OMNINXT4 Fixes: #12643

blckmn closed this as completed in #12652 Apr 10, 2023

blckmn pushed a commit that referenced this issue Apr 10, 2023

CONFIG: Add W25Q128FV to REVOLTOSD (#12651)

77cf7b1

Add W25Q128FV to REVOLTOSD Fixes: #12643

blckmn pushed a commit that referenced this issue Apr 11, 2023

CONFIG: Add FLASH_W25Q128FV to SYNERGYF4 (#12660)

1498c0a

Fixes: #12643

davidbitton pushed a commit to davidbitton/betaflight that referenced this issue Feb 5, 2024

CONFIG: Add W25Q128FV to OMNINXT4 (betaflight#12652)

717a933

Add W25Q128FV to OMNINXT4 Fixes: betaflight#12643

davidbitton pushed a commit to davidbitton/betaflight that referenced this issue Feb 5, 2024

CONFIG: Add W25Q128FV to REVOLTOSD (betaflight#12651)

b14d7a9

Add W25Q128FV to REVOLTOSD Fixes: betaflight#12643

davidbitton pushed a commit to davidbitton/betaflight that referenced this issue Feb 5, 2024

CONFIG: Add FLASH_W25Q128FV to SYNERGYF4 (betaflight#12660)

a7967c7

Fixes: betaflight#12643

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

revoltosd and OmniNXTF4 flash does not show up on Betaflight 4.4 #12643

revoltosd and OmniNXTF4 flash does not show up on Betaflight 4.4 #12643

oyvinla commented Apr 9, 2023

oyvinla commented Apr 9, 2023

haslinghuis commented Apr 9, 2023

haslinghuis commented Apr 9, 2023

oyvinla commented Apr 9, 2023

haslinghuis commented Apr 9, 2023

oyvinla commented Apr 9, 2023

oyvinla commented Apr 10, 2023 •

edited

fireduckfpv commented Apr 10, 2023

haslinghuis commented Apr 10, 2023

revoltosd and OmniNXTF4 flash does not show up on Betaflight 4.4 #12643

revoltosd and OmniNXTF4 flash does not show up on Betaflight 4.4 #12643

Comments

oyvinla commented Apr 9, 2023

Describe the bug

To Reproduce

Expected behavior

Support ID

Flight controller

Other components

How are the different components wired up (including port information)

Add any other context about the problem that you think might be relevant here

oyvinla commented Apr 9, 2023

Betaflight / STM32F405 (S405) 4.4.1 Apr 9 2023 / 06:39:43 (e43d591) MSP API: 1.45

config: YES

board: manufacturer_id: AIRB, board_name: OMNINXT4

status

flash_info

dump hardware

version

Betaflight / STM32F405 (S405) 4.4.1 Apr 9 2023 / 06:39:43 (e43d591) MSP API: 1.45

config: YES

start the command batch

resources

timer

pin B05: TIM3 CH2 (AF2)

pin B04: TIM3 CH1 (AF2)

pin B00: TIM3 CH3 (AF2)

pin B01: TIM3 CH4 (AF2)

pin C09: TIM8 CH4 (AF3)

pin C08: TIM8 CH3 (AF3)

pin B09: TIM11 CH1 (AF3)

pin B08: TIM10 CH1 (AF3)

pin B07: TIM4 CH2 (AF2)

pin A09: TIM1 CH2 (AF1)

pin B15: TIM12 CH2 (AF9)

pin B06: TIM4 CH1 (AF2)

pin A02: TIM9 CH1 (AF3)

pin A03: TIM9 CH2 (AF3)

pin B10: TIM2 CH3 (AF1)

pin B11: TIM2 CH4 (AF1)

pin A00: TIM5 CH1 (AF2)

pin A01: TIM5 CH2 (AF2)

pin C06: TIM8 CH1 (AF3)

pin C07: TIM8 CH2 (AF3)

pin A10: TIM1 CH3 (AF1)

dma

ADC 1: DMA2 Stream 4 Channel 0

pin B05: DMA1 Stream 5 Channel 5

pin B04: DMA1 Stream 4 Channel 5

pin B00: DMA1 Stream 7 Channel 5

pin B01: DMA1 Stream 2 Channel 5

pin C09: DMA2 Stream 7 Channel 7

pin C08: DMA2 Stream 4 Channel 7

pin B07: DMA1 Stream 3 Channel 2

pin A09: DMA2 Stream 6 Channel 0

pin B06: DMA1 Stream 0 Channel 2

pin B10: DMA1 Stream 1 Channel 3

pin B11: DMA1 Stream 7 Channel 3

pin A00: DMA1 Stream 2 Channel 6

pin A01: DMA1 Stream 4 Channel 6

pin C06: DMA2 Stream 2 Channel 0

pin C07: DMA2 Stream 3 Channel 7

pin A10: DMA2 Stream 6 Channel 0

feature

serial

master

end the command batch

haslinghuis commented Apr 9, 2023

haslinghuis commented Apr 9, 2023

oyvinla commented Apr 9, 2023

haslinghuis commented Apr 9, 2023

oyvinla commented Apr 9, 2023

oyvinla commented Apr 10, 2023 • edited

fireduckfpv commented Apr 10, 2023

haslinghuis commented Apr 10, 2023

Betaflight / STM32F405 (S405) 4.4.1 Apr 9 2023 / 06:39:43 (`e43d591`) MSP API: 1.45

Betaflight / STM32F405 (S405) 4.4.1 Apr 9 2023 / 06:39:43 (`e43d591`) MSP API: 1.45

oyvinla commented Apr 10, 2023 •

edited