-
Notifications
You must be signed in to change notification settings - Fork 7
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
CSI/DSI attachments too dark #10
Comments
I noticed this with a cam as well, but mine isn't horrible, just really dark. Thought maybe there was a setting control for it using uv4l, but I haven't figured it out yet. |
ok webcam has improved, dsi tft still dark as the night |
I'll get this flagged for the engineers to look at this week. @BTTJUSTIN please take note that this is a documentation problem that needs the required commands to be added to the manual to adjust camera and display exposure/brightness for CSI and DSI. |
At present, the camera image preprocessing (ISP) for CSI has not been implemented. Subsequent versions will implement ISP. |
And what about DSI brightness? |
The Raspberry Pi DSI screen backlight will be updated in future versions |
HI, I enter the command you mentioned , but the output not good Could you please post before and after pictures?@moom-knight |
CSI still with bad images. |
At present, there is no work plan for the ISP, and future version updates will include ISP image processing. |
So following the manual pdf, I setup my Picam and Waveshare 4.3 DSI display correctly.
They both work, but they are dark as the night.
The Picam picture is barely visible, even when I light the area externally, the image brigthness does not improve.
Same with the TFT. Its working. Its just seems the background lighting is not working/powered properly.
But when I tap the tft, I can see Mainsail throwing the errors out like too low temp for extrusion.
I already checked and replaced the cables, of course.
both devices work as expected when connected to an original Pi 3B
So both devices CSI/DSI seem to have some kind of power issue, like missing a power line or not providing enough current on the existing lines.
Anyone got an idea?
The text was updated successfully, but these errors were encountered: