Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

40 Pin Header - CB1 GPIO Not Working PG7, PG8, PG9, PH10 #7

Open
x2ocoder opened this issue Nov 16, 2022 · 2 comments
Open

40 Pin Header - CB1 GPIO Not Working PG7, PG8, PG9, PH10 #7

x2ocoder opened this issue Nov 16, 2022 · 2 comments

Comments

@x2ocoder
Copy link

The following pins do not have any output response with CB1

PG7, PG8, PG9, PH10
@x2ocoder
Copy link
Author

x2ocoder commented Jan 5, 2023 •
edited
Loading

PG7/8/9 is documented as going to the BT Module in this PDF
PH10 is documented as Reserved GPIO in this PDF yet is exposed on the 40 Pin Header
https://github.com/bigtreetech/CB1/blob/master/Hardware/BIGTREETECH_CB1_V22_220812_SCH.pdf

Does PG7/8/9, PH10 also go to the 40 Pin Header as documented in Page 9 of this PDF?
https://github.com/bigtreetech/Manta-M4P/blob/master/BIGTREETECH_MANTA_M4P_User_Manual.pdf

@x2ocoder x2ocoder mentioned this issue Jan 5, 2023
Open
@looxonline
Copy link
Collaborator

Have taken this down as something to correct. Will get onto it with the team a little later today. Thanks for pointing it out.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@looxonline @x2ocoder