Development Board Discontinued

[ssalinasnmt]

The Nucleo-H743ZI dev board has been discontinued or obsoleted by STMicro, as reported on Digikey, Arrow and Mouser.

The suggested alternate is the Nucleo-H743ZI2, which appears to be identical form factor, but with different capabilities - specifically, according to the data sheet, the new board supports STLINK-V3E where the original supports ST-LINK/V2-1. The new board also lacks support for Arm Mbed. I don't believe either of these differences will affect this project, but I'm not entirely sure.

[bitbane]

Hey, thanks for the heads up. I'll pick up one of the new Dev boards and verify, but it looks like it should Just Work(tm). (Famous last words)

…

On Fri, Aug 9, 2019, 12:52 PM Sean Salinas ***@***.***> wrote: The Nucleo-H743ZI dev board has been discontinued or obsoleted by STMicro, as reported on Digikey <https://www.digikey.com/product-detail/en/stmicroelectronics/NUCLEO-H743ZI/497-17786-ND/7809236>, Arrow <https://www.arrow.com/en/products/nucleo-h743zi/stmicroelectronics> and Mouser <https://www.mouser.com/ProductDetail/STMicroelectronics/NUCLEO-H743ZI?qs=sGAEpiMZZMtw0nEwywcFgJjuZv55GFNm7ytwN0oIlEPfWPOCd3VVEQ%3D%3D> . The suggested alternate is the Nucleo-H743ZI2, which appears to be identical form factor, but with different capabilities - specifically, according to the data sheet <https://www.st.com/resource/en/data_brief/nucleo-h743zi.pdf>, the new board supports STLINK-V3E where the original supports ST-LINK/V2-1. The new board also lacks support for Arm Mbed. I don't believe either of these differences will affect this project, but I'm not entirely sure. — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#4?email_source=notifications&email_token=AEUZ3CNH6DDRHTZ2IFGB4QDQDWOEDA5CNFSM4IKVW2V2YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HEOFBOA>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AEUZ3CILOUBWFXNRNDLBCEDQDWOEDANCNFSM4IKVW2VQ> .

[bitbane]

Sorry for the long delay, but the Nucleo-H743ZI2 works just fine out of the box. I'll get the readme updated.

[mecani]

sorry to comment a closed issue but the Nucleo-H743ZI2 doesn't work out of the box for me, the a solder had to be done on the sb7 path on the bottom side. My version is slightly different, I have the MB1364-h743zi-c01 and MB1364C instead of MB1364B.