Releases: CarlosGS/Cyclone-PCB-Factory
Cyclone v2.3
Browse the V2.3 repository at https://github.com/carlosgs/Cyclone-PCB-Factory/tree/v2.3
Documentation: https://github.com/carlosgs/Cyclone-PCB-Factory/wiki
V2.3 incorporates:
- The STLs have been fixed by Kyle McKee, now they can be properly sliced with Slic3r
- Want to build a Cyclone of custom dimensions? Take a look at Cyclone XL (experimental at the moment)
- Rounded the base corners in the OpenScad 3D model
IMPORTANT: If you just want to build the machine, download the files from the button below rather than from the main repository. This will ensure consistency in your build
Cyclone v2.2
Browse the V2.2 repository at https://github.com/carlosgs/Cyclone-PCB-Factory/tree/v2.2
Documentation: https://github.com/carlosgs/Cyclone-PCB-Factory/wiki
V2.2 incorporates:
- BQ additions have been re-incorporated into the main parametric design (zip-ties in the Y carriage linear bearing holders, longer Z motor gear, same orientation of the Y rod idlers).
- If you use RAMPS, you may want to try this GRBL mod, it is better than Marlin. Control it with the bCNC graphical interface.
- Z carriage modified for Dremel 3000 by Nicolas Arias and Marcos Bladauskas. Available in the Output_files folder.
- Check out the Arduino CNC shield housing by Oliver Kreuzenbeck (Helicon).
- If your printer is too small to print the main frames of the machine, take a look at the shorter version (thanks Burt Bicksler!!). Available in the ./Output_files/ShorterVersion/ folder.
IMPORTANT: If you just want to build the machine, download the files from the button below rather than from the main repository. This will ensure consistency in your build.
Cyclone v2.1
Browse the V2.1 repository at https://github.com/carlosgs/Cyclone-PCB-Factory/tree/v2.1
V2.1 incorporates:
- Source code improvements (better parameterization, M4 screw version) by Arne Durr (D-Byte).
- An aluminium spindle holder by Marc Muntada (quikshot).
- There is also a folder with the version by Pedro de Oro and Luis Díaz from bq, with some additions that simplify the assembly process.
- Daniel Evrard has assembled Cyclone in Sketchup which can be very useful as a template.
- Thanks must also go to ve3sjk, joco-nz, Aisflow, Yiannis Mandravellos, Samuel Kranz and yOPERO for their constructive discussions and continuous support.
IMPORTANT: If you just want to build the machine, download the files from the button below rather than from the main repository. This will ensure consistency in your build.
Picture by Pedro de Oro at bq
Cyclone v2.0
Browse the V2.0 repository at https://github.com/carlosgs/Cyclone-PCB-Factory/tree/v2.0
V2.0 was developed in the department of innovation and robotics at bq, a really cool Spanish company :-)
IMPORTANT: If you just want to build the machine, download the files from the button below rather than from the main repository. This will ensure consistency in your build.
Cyclone v0.9.7
Browse the V0.9.7 repository at https://github.com/carlosgs/Cyclone-PCB-Factory/tree/v0.9.7