Which parameters should I use to print the parts?

[gsalvati]

Which parameters should I use to print the parts?
I found only this:
https://github.com/CarlosGS/Cyclone-PCB-Factory/tree/v2.3/Output_files/STL_plates

Can I use this configuration to print all the parts?

[CarlosGS]

Indeed! Some people have reported that holes are too large when printing at very fine resolution, so in fact it is better to use the coarse settings

Maybe I'd raise a little bit the fill density, to 25%
Please let me know of any issues while printing the parts

[gsalvati]

Thanks a lot