Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Plipbox has stopped working #19

Open
matthocker opened this issue Apr 18, 2024 · 0 comments
Open

Plipbox has stopped working #19

matthocker opened this issue Apr 18, 2024 · 0 comments

Comments

@matthocker
Copy link

Hi, I have a Plipbox Deluxe that I've owned for a few years. Recently it seems to have stopped working on my Amiga 1000 so I thought I'd try to get it working with a fresh OS3.2 install on my Denise (A500+) with a Pistorm running Emu68. I have not been successful.

Here's what I've done:

  • Fresh install of 3.2
  • Copied plipbox.device 68040 version to devs:networks
  • Amitcp-3.0b2 install, following instructions here: https://megaburken.net/~patrik/AmiTCP_Install/ and using plipbox.device as the network device plipbox0
  • Rebooted, everything appears to load properly but pings to my router are not coming back

I plugged the serial port into my laptop, set mode 4, and ran dev_test 040 version on the Amiga. The menu for plipbox comes up fine in Putty:

cnt bytes err drop rate
0000 00000000 0000 0000 0000.00 KB/s rx plipbox
0000 00000000 0000 0000 0000.00 KB/s tx
0073 000032E6 0000 0000 0449.87 KB/s rx pio
0000 00000000 0000 0000 0000.00 KB/s tx
000933.9018 pio: exit
000933.9058 [BRIDGE] off
000933.9103 [PB_TEST] on

... but pressing "p" in mode 4 does nothing on the Amiga, it continues to say "Waiting for incoming packets..."

Mode 1 looks like this, not sure if it's normal or not:

000846.7008 pio: init: enc28j60: ok! mac=00:80:10:A1:B1:C1 flags=04 rev=07
000846.8626 FIRST INCOMING!
000846.8679 OFFLINE DROP: 003C
000847.6146 OFFLINE DROP: 015C
000847.9860 OFFLINE DROP: 004D
000848.8254 OFFLINE DROP: 003F
000848.8312 OFFLINE DROP: 003F
... etc...

One additional item, as I'm pinging on the Amiga, I get this on the plipbox:

000081.0170 [MAGIC] request
000082.0318 [MAGIC] request
000083.0432 [MAGIC] request

So there must be some kind of communication going on...

I have also tried:

  • NOBURST mode
  • Reflashing with AVRDUDE
  • Going back to the A1000 and checking all the configuration to make sure it matches what I've done here

I'm at a bit of a loss here. Any suggestions on what I might be missing?

Thanks!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant