Skip to content

Commit

Permalink
update baudrate
Browse files Browse the repository at this point in the history
  • Loading branch information
vliedel committed Nov 14, 2018
1 parent 05dbd9f commit 30e22d8
Showing 1 changed file with 2 additions and 2 deletions.
4 changes: 2 additions & 2 deletions docs/INSTALL.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -346,9 +346,9 @@ The main way to debug your application is through UART. The TX pin is defined by

In case you happen to have the nRFgo Motherboard (nRF6310, strongly recommended) you can easily connect the pins at P2.0 and P2.1 to respectively the pins RXD and TXD on P15 on the board. Do not forget to switch on the RS232 switch. Subsequently you will need some RS232 to USB cable if you haven't an extremely old laptop.

The current set baudrate you can find in `cs_Serial.cpp` and is `38400` baud. To read from serial you can for example use `minicom` (replace ttyUSB0 with the correct device):
The current set baudrate you can find in `cs_Serial.cpp` and is `230400` baud. To read from serial you can for example use `minicom` (replace ttyUSB0 with the correct device):

minicom -b 38400 -c on -D /dev/ttyUSB0
minicom -b 230400 -c on -D /dev/ttyUSB0

If this requires sudo rights, you may want to add yourself to the dialout group:

Expand Down

0 comments on commit 30e22d8

Please sign in to comment.