-
Notifications
You must be signed in to change notification settings - Fork 46
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
LYWSD03MMC-z #118
Comments
Hi! You haven't flashed firmware from this repo but from a fork https://github.com/pvvx/ZigbeeTLc/ You can follow up with that fw, or use local ota to convert to my firmware using local OTA (z2m or ZHA) and 1141-020a-11003001-z03mmc.zigbee.zip as new firmware. |
I had the same issue. This is what I did:
When I do an OTA now, the device is updated to a newer version of the fork :-( I tried adding the zip-file you linked to a local index, but z2m does not pick up that file but still the fork. Do you know how I can force z2m to OTA your file? configuration.yaml:
my_index.json
|
Your ota configuration looks good. It depends on errors that you have trying to update. |
It is, yes. I see the message
|
Hey, |
z2m caches device properties if mac address wasn't changed. You can reread it via dev console, or remove device, restart z2m and join the device again. |
Indeed. Dev console -> cluster genBasic -> attribute modelId -> read. Thanks! |
I was having the exact same issue and I was trying to flash different OTA updates (but they never showed up, because they were probably/obviously not the right ones). Your update file showed up immediately. Just out of curiosity: How did you know the right update firmware file? |
I have a hard time downgrading to BLE again. I tried all available files, according to this website: Tried the Dev console thing mentioned here as well. How can I downgrade/switch to BLE when I already have the latest zigbee version now? These are it's values: I mainly want to go back to BLE, because the zigbee firmware doesn't seem to properly update the temperature back. Only when I manually press the refresh arrows in Zigbee2mqtt for temperature, it get's updated properly. Already set the reporting times and values very low, but no luck. |
In the end I went back to Bluetooth via: https://github.com/devbis/z03mmc?tab=readme-ov-file#return-to-bluetooth-firmware Using the file: https://github.com/devbis/z03mmc/blob/master/assets/db15-0203-99993001-ATC_v46.zigbee Why did I went back? Well, the temperature almost never seemed to update. It kept the current temperature until I clicked on the refresh icons of the temperature in Zigbee2mqtt. |
After flashing the LYWSD03MMC with z03mmc 1.1.0 the device connect's to zigbee2mqtt.
Flashed first from OTA and after from UART but the problem persist.
The only available value is the battery, it is strange because the device is called: LYWSD03MMC-z
Other's users have also this problem: https://www.reddit.com/r/homeassistant/comments/1aok4l4/help_im_stuck_with_an_unknown_zigbee_device/
The text was updated successfully, but these errors were encountered: