Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Add ext power cutoff, second LED output, and swap LED connector +/- on PCB#1 #32

Closed
EfficiencyJunky opened this issue Jan 4, 2021 · 5 comments
Closed

Add ext power cutoff, second LED output, and swap LED connector +/- on PCB#1 #32

EfficiencyJunky opened this issue Jan 4, 2021 · 5 comments
Assignees
@EfficiencyJunky
Labels
electronics LED Sticks Issues related to the physical sticks Part Update when parts need to be updated

Comments

@EfficiencyJunky
Copy link
Owner

EfficiencyJunky commented Jan 4, 2021 •
edited
Loading

We need to redesign the brain board slightly so that it can be programmed more easily while connected to the led light sticks, can control the 2 strips individually, and adheres to the color codes of the harnesses we're using

  1. Add power cutoff for programming
  2. add second LED Strip data connection to PCB1 and Blinky Tape
  3. Swap positive and negative power connections

PARTS
200 Ohm Resistor (1206 SMD): https://www.digikey.com/en/products/detail/stackpole-electronics-inc/RMCF1206FT200R/1759762
0 Ohm Resistor (1206 SMD): https://www.digikey.com/en/products/detail/stackpole-electronics-inc/RMCF1206ZT0R00/1756906
Jumper (shorting connector): https://www.digikey.com/en/products/detail/sullins-connector-solutions/QPC02SXGN-RC/2618262
@EfficiencyJunky EfficiencyJunky added electronics Part Update when parts need to be updated LED Sticks Issues related to the physical sticks labels Jan 4, 2021
@EfficiencyJunky EfficiencyJunky self-assigned this Jan 4, 2021
@EfficiencyJunky
Copy link
Owner Author

EfficiencyJunky commented Jan 4, 2021 •
edited
Loading

need to make new footprints for BlinkyTape, and 3pos JST-XH connectors
need to add 2 pin header, and 1206 Resistor footprints (or 3 way connector)

@EfficiencyJunky
Copy link
Owner Author

finished adding Blinky Tape and 3Pos JST-HX connectors in Library V54

@EfficiencyJunky
Copy link
Owner Author

EfficiencyJunky commented Jan 5, 2021 •
edited
Loading

Pad Dimensions for https://www.digikey.com/en/products/detail/stackpole-electronics-inc/RMCF1206FT200R/1759762
Screen Shot 2021-01-04 at 6 06 35 PM

@EfficiencyJunky
Copy link
Owner Author

finished adding 3 way resistor in version 56

@EfficiencyJunky
Copy link
Owner Author

Resolved in Library version 56 and PCB1 Schematic V2p2 V2

@EfficiencyJunky EfficiencyJunky changed the title Add power cutoff for programming to PCB#1 Add ext power cutoff, second LED output, and swap LED connector +/- on PCB#1 Jan 5, 2021
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@EfficiencyJunky EfficiencyJunky

Labels
electronics LED Sticks Issues related to the physical sticks Part Update when parts need to be updated
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
1 participant
@EfficiencyJunky