Skip to content
This repository has been archived by the owner on Jan 14, 2022. It is now read-only.

CIPMUX

Jump to bottom
fuho edited this page Mar 21, 2015 · 3 revisions

AT+CIPMUX – Enable multiple connections or not

Type Instruction Response Function
Set AT+CIPMUX=mode OK Set connection mode, single connection or multiple connection.

Parameter description：
mode:

  • 0: single connection
  • 1: multiple connection

NOTE
This mode can only be changed after all connections are disconnected. If server is started, reboot is required.

AT
AT+RST
AT+GMR
AT+GSLP
ATE

AT+CWMODE
AT+CWLAP
AT+CWJAP
AT+CWQAP
AT+CWSAP
AT+CWLIF
AT+CWDHCP
AT+CIPSTAMAC
AT+CIPAPMAC
AT+CIPSTA
AT+CIPAP

AT+CIPSTATUS
AT+CIPSTART
AT+CIPSEND
AT+CIPCLOSE
AT+CIFSR
AT+CIPMUX
AT+CIPSERVER
AT+CIPMODE
AT+CIPSTO
AT+CIUPDATE
+IPD
AT+IPR

  • AT Command Test Example
  • at_020
Clone this wiki locally