You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I figure images aren't going to help much here but trying to transfer lubricant only from a distillation tower but not a simple barrel/tank to another barrel/tank (which the latter is fine) all methods are fine with pipes but if you install a fluid router along the line lubricant won't pass through from a distillation tower. I added the lubricant to the filter on every side, NBT checking on/off, etc. and no such luck though all other fluids work fine.
The text was updated successfully, but these errors were encountered:
Be ready for a lot of images. First the setup. The Crude Oil is being drained from the pumpjacks and going into the tower. The tower is on and making the fluids. The fluids are draining into the tanks via a fluid router but for the Lubricant which remains in the tower. The router is touching the tower output but can be moved further away to the same results. I took images of each of the sides and values I had to show this and also the faces of the router to show I had them all going in the correct directions.
I figure images aren't going to help much here but trying to transfer lubricant only from a distillation tower but not a simple barrel/tank to another barrel/tank (which the latter is fine) all methods are fine with pipes but if you install a fluid router along the line lubricant won't pass through from a distillation tower. I added the lubricant to the filter on every side, NBT checking on/off, etc. and no such luck though all other fluids work fine.
The text was updated successfully, but these errors were encountered: