v0.6.3

This release fixes CTDs observed with the previous stable release v0.6.2 of the A32NX.

Please refer to the release notes here https://github.com/flybywiresim/a32nx/releases/tag/v0.6.2 for a detailed changelog of the stable version.

Changelog

• [MODEL] Remove unused material to fix crash to desktop - @aguther (Andreas Guther)
• [MODEL] Rename default named GLTF materials - @tracernz (Mike)
• [INFO] Thumbnail images and version - @kiwi2021 (Kiwi)

v0.6.2

This is a bugfix (stable) release of the FlyByWire Simulations A32NX for Sim Update 5 (MSFS v1.18.14).

If you run into any issues with the addon, please do the following before asking for help or opening a bug report:

• Use legacy cockpit interaction system
• Read the reported issues page
• Run the addon without custom liveries
• Run the addon without other addons (only for diagnosing, please report the issue if it is caused by a third-party addon!)
• Ensure that you only have one version of A32NX installed (including marketplace edition, please uninstall from the content manager in sim).
• Run the simulator without AI Traffic/Multiplayer/Ground Vehicles
• Run the simulator with less peripherals attached.
• Run a clean installation
• Make sure you are running MSFS on Windows 10 version 2004 or greater
• Ensure that your dynamic page file is set correctly. (Start Menu > Search > sysdm.cpl > Advanced > Performance > Settings > Advanced > Virtual Memory > Paging > ☑️ Automatically Manage Paging File Size for All Drives)
• Please make sure you download the addon via the zipped release below, or the official installer (cloning via Git/Github requires you to build first)

Changelog

• [FLIGHT MODEL] Force usage of modern flight model - @aguther (Andreas Guther)
• [TEXTURE] Corrected fire panel - @ImenesFBW (Imenes)
• [MODEL] Fixed artifacting of pedestal and push buttons - @tyler58546 (tyler58546)
• [LIGHTS] New potentiometer for lights, emissives and screens. - @bouveng (Johan Bouveng)
• [MISC] Fixed flight plan entry and broken lights for SU5 @Saschl (saschl#9432), @Taz5150 (TazX [Z+2]#405)
• [TERR] Fixed terrain radar for SU5 - @2hwk (2Cas#1022)
• [MISC] Change back to airliner hud in external view for SU5 - @donstim (donbikes#4084)

Latest Issues

• Altitude issues causing the plane to "chase" altitude in cruise under certain conditions. There is no fix for this issue in SU5, this is a simulator bug. This is worked around in the development version, but VATSIM will still see incorrect pressure altitude until this is resolved by Asobo (post SU5).
• Intermittent (infrequent) high fuel burn and poor engine performance caused by extremely inaccurate temperature being returned from Live Weather. Use a weather preset until this is resolved by Asobo (post SU5).
• Engine animations sometimes not playing on Loading Cinematics when loading departing on a runway at certain airfields. To be resolved by Asobo (post SU5).
• External strobe lights have inaccurate/bugged behavior sometimes.
• Using the printer may trigger CTDs on occasion. See blurb below on CTDs.
• Toggle Spoilers bindings sometimes may not work This is a Sim issue that affects all planes. To be resolved by Asobo (post SU5).

Common Issues

• Crash to Desktop when loading into the world. UPDATE: There will be a fix in place for this specific CTD after the 2nd MSFS hotfix. Expect a new stable release which will address this shortly.

• Crash to Desktop not when loading in. After this patch, this and other such CTD issues are not caused by the A32NX addon. In SU5 there are multiple overlapping issues which can cause CTDs. These include but are not limited to memory leaks, corrupt installation of update packages (by the MSFS content manager), disconnecting peripherals, crashing when loading many objects in a scene, switching aircraft in the main menu causing CTDs when plane is loaded on the world map (fine on relaunch), incorrect compilation flags being set for WASM compilation causing potentially-lossy assumptions about floating point math. The developer version is particularly badly affected by the last issue (fast math), because of the complex calculations involved in deeper systems. This is not a fault that we can resolve. Available Mitigations:

  • Run the addon without custom liveries
  • Run the addon without other addons (only for diagnosing, please report the issue if it is caused by a third-party addon!)
  • Run the simulator without AI Traffic/Multiplayer/Ground Vehicles
  • Turn Generic Plane models on if you do wish to use traffic
  • Run the simulator with less peripherals attached.

• General autopilot/lateral navigation issues (will be fixed with upcoming custom FMGC)

• AP not following the flight plan (leaking input values affect, but doesn't disconnect the AP)

  • Workaround: Set dead-zones for your input device higher
    • Go to your settings
    • Controls and select your yoke/joystick/controller.
      • After that click the sensitivity button on the top left which should take you to the menu where you can adjust your deadzones. Start with 20% deadzone, if the problem persists keep increasing it. If it's fine with 20% you can then slowly decrease it too.

• Autopilot goes direct to RWY on APP (same with the default A320)

  • Workaround: Use DIR TO a waypoint or selected heading

• Plane is invisible

  • Check your content manager for missing packages
  • Livery/Addon Conflict

• Rudder keybindings not working

  • You have to set your keybinding to rudder axis right and left

• Wing dips on landing (due to bad transition to direct law in flare, same with the default A320)

  • Workaround: use minimal aileron input on landing, or try the development version.

• Black screens / unable to start

  • Conflict with another addon/livery or incorrect installation of the A32NX addon
  • Use our installer

• Upper ECAM displays wrong THR levers position / N1 rating

• ASOBO Aviator/Beta Club A320 liveries are incompatible with the A32NX addon

v0.6.1

This is a bugfix (stable) release of the FlyByWire Simulations A32NX.

If you run into any issues with the mod, please do the following before asking for help or opening a bug report:

• Run the mod without custom liveries
• Run the mod without other mods (only for diagnosing, please report the issue if it is caused by a third-party mod!)
• Make sure you are running MSFS on Windows 10 version 2004 or greater
• Please make sure you download the mod via the zipped release below, or the official installer (cloning via Git/Github requires you to build first)

Changelog

1. [DISPLAYS] RMP backlight, ATC and RTPI font color and backlight - @marcman86 (marcman86#4907)
2. [EFB] Fix fuel tank capacity values - @donstim (donbikes#4084)
3. [MISC] Fixed EVAC button animation - @tyler58546 (tyler58546)
4. [ECAM] Improved alternating of igniters - @joseph-tobin (joseph#1001)
5. [EFB] Reduced bundle size for better performance
6. [TEXTURE] Upscaled the existing FBW livery to 8K - @FoxinTale (Aubrey)

Latest Issues

• Wipers don't function correctly on FSX Liveries
• Some missing icons on EFB map
• Some missing glyphs in custom MCDU font
• General autopilot/lateral navigation issues (will be fixed with upcoming custom AP)

Common Issues

• AP not following the flight plan (leaking input values affect, but doesn't disconnect the AP)

  • Workaround: Set dead-zones for your input device higher
    • Go to your settings
    • Controls and select your yoke/joystick/controller.
      • After that click the sensitivity button on the top left which should take you to the menu where you can adjust your deadzones. Start with 20% deadzone, if the problem persists keep increasing it. If it's fine with 20% you can then slowly decrease it too.

• Autopilot goes direct to RWY on APP (same with the default A320)

  • Workaround: Use DIR to a waypoint or selected heading

• CTD when pressing FLY on world menu

  • Check your content manager for missing packages

• CTD during loading

  • Currently caused by an MSFS issue with standalone modules. Please uninstall MobiFlight, FSUIPC, and YourControls (or any other standalone WASM modules) until MS releases a hotfix

• Plane is invisible

  • Check your content manager for missing packages
  • Livery/Mod Conflict

• Rudder keybindings not working

  • You have to set your keybinding to rudder axis right and left

• Wing dips on landing (due to bad transition to direct law in flare, same with the default A320)

  • Workaround: use minimal aileron input on landing, or try the experimental version

• Black screens / unable to start

  • Conflict with another mod/livery or incorrect installation of the A32NX mod
  • Use our installer

• Upper ECAM displays wrong THR levers position / N1 rating

• ASOBO Aviator/Beta Club A320 liveries are incompatible with the A32NX mod

v0.6.1-rc1

build: bump version

v0.6.0

This is a stable release of the FlyByWire Simulations A32NX.

If you run into any issues with the mod, please do the following before asking for help or opening a bug report:

• Run the mod without custom liveries
• Run the mod without other mods (only for diagnosing, please report the issue if it is caused by a third-party mod!)
• Make sure you are running MSFS on Windows 10 version 2004 or greater
• Please make sure you download the mod via the zipped release below, or the official installer (cloning via Git/Github requires you to build first)

Major New Features

• Aircraft separated from default Asobo A320neo
• Completely overhauled interior textures and decals
• Addition of EFB (Electronic flight bag) tablet, with SimBrief integration and ground handling
• Addition of printer for METAR, ATIS, and TELEX messages
• Overhauled interior and exterior sounds
• Introduction of custom, in-depth electrical system
• Introduction of custom, in-depth APU simulation (APS3200)
• Improved flight model accuracy
• Split RMP1/COM1 and RMP2/COM2 radio stacks
• Custom camera views
• Support for CONF3 (flaps 3) landings
• TRK/FPA mode
• GPWS improvements
• Introduction of brake fan
• General MCDU/FMC improvements

Changelog

1. [ADIRS] Added "ON BAT" light to ADIRS panel - @tyler58546 (tyler58546)
2. [APU] APU GEN output appears around 84% N - @davidwalschots (David Walschots)
3. [APU] APU enters cooldown mode when APU BLEED was used in the last two minutes before shutdown - @davidwalschots (David Walschots)
4. [APU] APU is available 2 seconds after 95% N or at 99.5% N - @davidwalschots (David Walschots)
5. [APU] Automatic shutdown causes the APU to be shown as unavailable on SYS - @davidwalschots (David Walschots)
6. [APU] Automatic shutdown triggers FWC cautions on Upper ECAM - @davidwalschots (David Walschots)
7. [APU] BLEED PSI is shown as 0 when the APU bleed air valve is not open, as the pressure transducer is downstream of the valve. - @davidwalschots (David Walschots)
8. [APU] BLEED PSI is shown when ADIRS1 on NAV, waiting for alignment is no longer necessary - @davidwalschots (David Walschots)
9. [APU] EGT is rounded to the nearest 5 degrees on the ECAM - @davidwalschots (David Walschots)
10. [APU] Emergency shutdown causes the APU to be permanently shown as unavailable on SYS - @davidwalschots (David Walschots)
11. [APU] Emergency shutdown triggers FWC cautions on Upper ECAM - @davidwalschots (David Walschots)
12. [APU] Out of range APU GEN output appears in amber - @davidwalschots (David Walschots)
13. [APU] Realistic start cycle in terms of time, N, and EGT - @davidwalschots (David Walschots)
14. [APU] Releasing the APU FIRE button makes the APU go into emergency shut down - @davidwalschots (David Walschots)
15. [APU] The APU automatically shuts down when the left inner fuel tank is empty, unless unlimited fuel is on - @davidwalschots (David Walschots)
16. [APU] Usage of APU GEN and BLEED fluctuates EGT - @davidwalschots (David Walschots)
17. [APU] When APU BLEED is ON and the APU isn't supplying bleed air, the overhead APU BLEED fault light turns on - @davidwalschots (David Walschots)
18. [CAMERA] Added new interior views - @Snapmatics (Harry)
19. [CDU] Added landing config selection (CONF3 or FULL) on Perf Appr page - @tracernz (Mike)
20. [CDU] Added WIND page - @tyler58546 (tyler58546)
21. [CDU] Fix ILS frequencies not autofilling - @pareil6 (pareil6)
22. [CDU] RADNAV - A manual VOR/ADF ident input is now permament - @St54Kevin
23. [CDU] RADNAV - All fields now have correct format display and input restricitons - @St54Kevin
24. [CDU] RADNAV - ID/Frequency fields now format to correct font size depending on pilot input - @St54Kevin
25. [CDU] Reworked Flight Phase system - @MisterChocker (Leon)
26. [CDU] Support coordinate waypoints from SimBrief, various other route import fixes - @pareil6 (pareil6)
27. [CHECKLISTS] Removed various outdated INOPs from the checklist - @Venorcis (Venorcis)
28. [CORE] Fixed Config 3 V2 table - @MisterChocker (Leon)
29. [CORE] Fixed Take Off Vls config 3 - @MisterChocker (Leon), @donstim (donbikes#4084)
30. [CORE] Fixed approach Vs being used during climb - @MisterChocker (Leon)
31. [CORE] Fixed altitude constraints calculation - @SergeySoprykin (SergeyS)
32. [DISPLAYS] Optimize performance by throttling instrument updates - @XSJoJo (Jorim Jaggi)
33. [ECAM] Added TCAS STBY warning - @paul92ilm (Lussion)
34. [ECAM] Added CONF/FLAPS 3 memos when GPWS LDG FLAPS 3 enabled - @tracernz (Mike)
35. [ECAM] Added F/CTL FLAP/MCDU DISAGREE check - @MisterChocker (Leon)
36. [ECAM] Added missing unit conversion to cruise and engine page - @MisterChocker (Leon)
37. [ECAM] Adjusted brake temp algorithm for new wheel sizes - @donstim (donbikes#4084)
38. [ECAM] Fixed engineering mode overlay displaying on upper ECAM in some cases - @davidwalschots (David Walschots)
39. [ECAM] Fixed visual error on COND page when hot air pressure valve was off - @RichardPilbery (tricky_dicky#3571)
40. [ECAM] Improved Ecam Memo TO Flaps and TO Config. Allows for Config 3 TO - @MisterChocker (Leon)
41. [ECAM] Refactored COND page to use new useSimVars - @RichardPilbery (tricky_dicky[Z+0]#3571)
42. [ECAM] Refactored DOORS/OXY page to use new useSimVars - @RichardPilbery (tricky_dicky[Z+0]#3571)
43. [ECAM] Improved ECAM when cabin pressure MODE SEL is set to manual - @mjuhe (Miquel)
44. [EFB] Added EFB fuel page and refuel logic - @Inexorable95 (Inexorable)
45. [EFB] Added functionality to ground services page - @Saschl (saschl#9432)
46. [EFB] Set font of OFP to monospace - @chkgk (Chriskgk#4359)
47. [ELEC] A basic emergency generator implementation is created, but not yet usable until HYD is implemented - @davidwalschots (David Walschots)
48. [ELEC] A fully functional ELEC page on the lower ECAM - @davidwalschots (David Walschots)
49. [ELEC] APU GEN, ENG GEN, EMER GEN and EXT PWR contactor only closes when potential and frequency within normal limits - @davidwalschots (David Walschots)
50. [ELEC] Above 100 knots, when TR 1 + 2 are unavailable, DC BAT BUS is unpowered - @davidwalschots (David Walschots)
51. [ELEC] At or below 100 knots, when TR 1 + 2 are unavailable DC BAT BUS is powered by the batteries - @davidwalschots (David Walschots)
52. [ELEC] Basic integrated drive generator implementation - @davidwalschots (David Walschots)
53. [ELEC] Batteries charge each other in certain situations - @davidwalschots (David Walschots)
54. [ELEC] Battery charge limiter (BCL) is almost fully implemented - @davidwalschots (David Walschots)
55. [ELEC] Both galleys are shed when none of the main power sources (GEN 1, GEN 2, APU GEN, or EXT PWR) is powering the aircraft - @davidwalschots (David Walschots)
56. [ELEC] Contactor logic is fully modelled - @davidwalschots (David Walschots)
57. [ELEC] DC BAT BUS legend becomes amber when its U <= 25V - @davidwalschots (David Walschots)
58. [ELEC] ESS TR arrow and wire appear in green when ESS TR contactor is closed - @davidwalschots (David Walschots)
59. [ELEC] EXT PWR has priority over the APU - @davidwalschots (David Walschots)
60. [ELEC] EXT PWR indicates electrical parameters - @davidwalschots (David Walschots)
61. [ELEC] Following an APU start the BCL opens the contactor when charge I < 4A for 30 minutes - @davidwalschots (David Walschots)
62. [ELEC] GEN 1 + 2 indicates electrical parameters - @davidwalschots (David Walschots)
63. [ELEC] GEN 1 + 2 legend indicates amber OFF when the respective GEN push button is OFF - @davidwalschots (David Walschots)
64. [ELEC] GEN 1 and GEN 2 have priority over the APU and EXT PWR - @davidwalschots (David Walschots)
65. [ELEC] IDG oil outlet temperature is indicated - @davidwalschots (David Walschots)
66. [ELEC] In certain conditions AC ESS BUS is powered by BAT 1 via the static inverter - @davidwalschots (David Walschots)
67. [ELEC] In certain conditions AC STAT INV BUS is powered by BAT 1 through the static inverter - @davidwalschots (David Walschots)
68. [ELEC] In certain conditions DC ESS BUS is powered by BAT 2 - @davidwalschots (David Walschots)
69. [ELEC] In normal conditions, TR 1 supplies power to DC BUS 1, DC BAT BUS, and DC ESS BUS - @davidwalschots (David Walschots)
70. [ELEC] In normal conditions, TR 2 supplies power to DC BUS 2 - @davidwalschots (David Walschots)
71. [ELEC] Power consumption during different phases of flight - @davidwalschots (David Walschots)
72. [ELEC] Realistic power consumption of the APU starter motor during APU start - @davidwalschots (David Walschots)
73. [ELEC] SHED appears below the AC ESS BUS when AC ESS SHED BUS is unpowered - @davidwalschots (David Walschots)
74. [ELEC] SHED appears below the DC ESS BUS when DC ESS SHED BUS is unpowered - @davidwalschots (David Walschots)
75. [ELEC] The AC ESS FEED FAULT light illuminates when AC ESS BUS isn't powered - @davidwalschots (David Walschots)
76. [ELEC] The APU generator's load % is calculated and displayed on the ECAM - @davidwalschots (David Walschots)
77. [ELEC] The BCL closes the contactor when BAT U < 26.5V AND BATBUS U > 27V for 225 milliseconds or more - @davidwalschots (David Walschots)
78. [ELEC] The BCL closes the contactor when the APU MASTER SW is ON - @davidwalschots (David Walschots)
79. [ELEC] The BCL doesn't close/opens the contactor when in EMER ELEC (AC1 + AC2 unpowered, airspeed > 100kts), and less than 45 seconds have passed since entering EMER ELEC and emergency generator not available - @davidwalschots (David Walschots)
80. [ELEC] The BCL doesn't close/opens the contactor when in EMER ELEC, and landing gear is not up - @davidwalschots (David Walschots)
81. [ELEC] The BCL opens the contactor on entering the EMER ELEC situation - @davidwalschots (David Walschots)
82. [ELEC] The BCL opens the contactor when in EMER ELEC and over three minutes have passed with the APU MASTER SW in the ON position - @davidwalschots (David Walschots)
83. [ELEC] The BCL opens the contactor when on the ground and BAT U < ...

v0.6.0-rc2

build: bump version

v0.6.0-rc1

build: bump version

v0.5.4

This is a hotfix release for various MSFS 1.14.5.0 compatibility issues.

If you run into any issues with the mod, please do the following before asking for help or opening a bug report:

• Run the mod without custom liveries
• Run the mod without other mods (only for diagnosing, please report the issue if it is caused by a third-party mod !)
• Make sure you are running MSFS on Windows 10 version 2004 or greater
• Please make sure you download the mod via the zipped release below, or the official installer (cloning via Git/Github requires you to build first)

Changelog

Fixed

1. [AVIONICS] Fixed avionics to be compatible with MSFS 1.14.5.0 - @tyler58546 (tyler58546), @Benjozork (Benjamin Dupont)
2. [FLIGHTMODEL] Fixed flaps to be compatible with MSFS 1.14.5.0 - @donstim (donbikes#4084)
3. [FCU] Fixed vertical speed selection to be compatible with MSFS 1.14.5.0 - @Benjozork (Benjamin Dupont)
4. [ND] Fixed VOR/ADF switches to be compatible with MSFS 1.14.5.0 - @tracernz (tracernz)
5. [EFFECTS] Added contrails from MSFS 1.14.5.0 - @tyler58546 (tyler58546)

Latest Issues

• Wipers don't function correctly on FSX Liveries

Common Issues

• AP not following the flight plan (leaking input values affect, but doesn't disconnect the AP)

  • Workaround: Set dead-zones for your input device higher
    • Go to your settings
    • Controls and select your yoke/joystick/controller.
      • After that click the sensitivity button on the top left which should take you to the menu where you can adjust your deadzones. Start with 20% deadzone, if the problem persists keep increasing it. If it's fine with 20% you can then slowly decrease it too.

• Autopilot goes direct to RWY on APP (same with the default A320)

  • Workaround: Use DIR to a waypoint or selected heading

• CTD when pressing FLY on world menu

  • Check your content manager for missing packages

• Plane is invisible

  • Check your content manager for missing packages
  • Livery/Mod Conflict

• Rudder keybindings not working

  • You have to set your keybinding to rudder axis right and left

• Wing dips on landing (due to bad transition to direct law in flare, same with the default A320)

  • Workaround: use minimal aileron input on landing

• Black screens / unable to start

  • Conflict with another mod/livery or incorrect installation of the A32NX mod
  • Use our installer

• Upper ECAM displays wrong THR levers position / N1 rating

• ASOBO Aviator/Beta Club A320 liveries are incompatible with the A32NX mod

v0.5.3

This is a hotfix release for various issues.

If you run into any issues with the mod, please do the following before asking for help or opening a bug report:

• Run the mod without custom liveries
• Run the mod without other mods (only for diagnosing, please report the issue if it is caused by a third-party mod !)
• Make sure you are running MSFS on Windows 10 version 2004 or greater
• Please make sure you download the mod via the zipped release below, or the official installer (cloning via Git/Github requires you to build first)

Changelog

Fixed

1. [FLIGHTMODEL] Fixed flap lift for compatibility with Microsoft Flight Simulator 1.13.16.0 - @donstim (donbikes#4084)
2. [MCDU] Fixed center runway id displaying on the flightplan page - @SergeySoprykin (SergeyS)
3. [DISPLAYS] Optimize performance by throttling instrument updates - @XSJoJo (Jorim Jaggi)
4. [ND] Waypoints on the ND now use the correct font - @tyler58546 (tyler58546)

Removed

1. [LIVERY] Removed Christmas themed livery - @ImenesFBW (Imenes)

Known issues

• ELEC ECAM page is not functional
• HYD ECAM page is missing
• GPWS altitude callouts can be repeated in some cases
• Various issues related to following STAR’s in managed heading mode
• Minor issues with following altitude constraints in managed altitude mode
• ADIRS “ON BAT” light has not been implemented yet

Common User Problems

• Autopilot sharp banking or nosediving:
  • Increase your hardware deadzones to 10% or above
• Aircraft spawns with all lights on and switches in odd positions:
  • Use the installer, DO NOT clone from Github!
• Low FPS in cockpit:
  • Set cockpit display refresh rate to medium or low
• Blank first officer screens:
  • Livery issue, please use a different livery
• Managed navigation mode skips STAR's and flies directly to airport:
  • Use selected heading when this occurs
• Wing dips on landing:
  • Use minimal aileron input below 100ft.

v0.5.2

This is a hotfix release for various issues.

If you run into any issues with the mod, please do the following before asking for help or opening a bug report:

• Run the mod without custom liveries
• Run the mod without other mods (only for diagnosing, please report the issue if it is caused by a third-party mod !)
• Make sure you are running MSFS on Windows 10 version 2004 or greater
• Please make sure you download the mod via the zipped release below, or the official installer (cloning via Git/Github requires you to build first)

Changelog

Fixed

1. [CDU] Changing CRZ/DES speed to acknowledge any speed restriction - @Watsi01 (RogePete)
2. [CDU] Two tiny fixes for flightphase speeds - @Watsi01 (RogePete)
3. [CDU] Fixed altitude button setting the speed on ATC request - @brookemckim (brookemckim)
4. [CDU] Error messages now print for invalid trip wind delims - @Lucky38i (Lucky38i)
5. [ND] Flight route now hidden in VOR ROSE and ILS ROSE modes - @2hwk (2Cas#1022)
6. [MISC] Fixed F/O displays being synced with the captain's displays - @tyler58546 (tyler58546)
7. [FUEL] Fixed outer tank fuel transfer - @donstim - (donbikes#4084)
8. [FLIGHTMODEL] Fixed spoiler auto-retract after landing - @donstim (donbikes#4084)
9. [FLIGHTMODEL] Fixed for flaps 1 unrecoverable dives - @donstim (donbikes#4084)
10. [API] Fixed connection issues when using default ATC and SimBrief - @nistei (nistei#1362)
11. [CHECKLISTS] Fixed typo in Descent preparation checklist - @Ronson1909 (Ronson1909)
12. [TCAS] Fixed TCAS traffic mode switch not turning - @Saschl (saschl#9432)
13. [DISPLAYS] Fixed background on DCDU and SAI to match other displays - @NathanInnes (Nathan Innes)
14. [ECAM] Added missing unit conversion to cruise and engine page - @MisterChocker (Leon)
15. [ECAM/CORE] Improved flap auto-retraction detection - @MisterChocker (Leon)
16. [TEXTURE] Fixed overlapping text on the chronometer - @DarkOfNova (DarkOfNova)

Known issues

• ELEC ECAM page is not functional
• HYD ECAM page is missing
• GPWS altitude callouts can be repeated in some cases
• Various issues related to following STAR’s in managed heading mode
• Minor issues with following altitude constraints in managed altitude mode
• ADIRS “ON BAT” light has not been implemented yet

Common User Problems

• Autopilot sharp banking or nosediving:
  • Increase your hardware deadzones to 10% or above
• Aircraft spawns with all lights on and switches in odd positions:
  • Use the installer, DO NOT clone from Github!
• Low FPS in cockpit:
  • Set cockpit display refresh rate to medium or low
• Blank first officer screens:
  • Livery issue, please use a different livery
• Managed navigation mode skips STAR's and flies directly to airport:
  • Use selected heading when this occurs
• Wing dips on landing:
  • Use minimal aileron input below 100ft.