Skip to content

Building Linux kernel with Filesystem Using Buildroot

Jump to bottom
Yuriy Kolerov edited this page Aug 1, 2023 · 1 revision

Getting Buildroot

Stable Buildroot releases are published every three months. Tarballs are available for each stable release (http://buildroot.org/downloads/). However, you can clone an upstream Git repository:

$ git clone https://git.busybox.net/buildroot
$ cd buildroot

Upstream Buildroot does not support ARCv3 families. If you are going to build Linux for ARCv3 then consider using a separate Synopsys repository with patches for support of ARC HS5x and ARC HS6x:

$ git clone https://github.com/foss-for-synopsys-dwc-arc-processors/buildroot
$ cd buildroot

Using Predefined Configurations

Buildroot uses configuration files (defconfigs) for configuring a root filesystem, a toolchain, a Linux kernel, etc. Buildroot comes with a number of existing predefined configurations which may be found in config directory. Use make list-defconfigs command to list all available configurations:

$ make list-defconfigs | grep snps
  snps_arc32_defconfig                - Build for snps_arc32
  snps_arc64_defconfig                - Build for snps_arc64
  snps_arc700_axs101_defconfig        - Build for snps_arc700_axs101
  snps_archs38_axs103_defconfig       - Build for snps_archs38_axs103
  snps_archs38_haps_defconfig         - Build for snps_archs38_haps
  snps_archs38_hsdk_defconfig         - Build for snps_archs38_hsdk

Here is a short description of each configuration:

  • snps_arc32_defconfig - A configuration for ARC HS5x on HAPS, nSIM or QEMU (available only in a separate repository).
  • snps_arc64_defconfig - A configuration for ARC HS6x on HAPS, nSIM or QEMU (available only in a separate repository).
  • snps_arc700_axs101_defconfig - A configuration for ARC 700 on AXS101 development board.
  • snps_archs38_axs103_defconfig - A configuration for ARC HS38 on AXS103 development board.
  • snps_archs38_haps_defconfig - A configuration for ARC HS3x/4x in ZeBU, HAPS, nSIM or QEMU.
  • snps_archs38_hsdk_defconfig - A configuration for ARC HS3x/4x on HSDK and HSDK 4xD development boards. This configuration builds images for running Linux using U-Boot.

Configuring Root Filesystem

You can select a predefined configuration this way:

$ make snps_archs38_haps_defconfig

You can manually tune filesystem's configuration this way:

$ make menuconfig

The final configuration file is saved in .config file.

Configuring Linux Kernel

Also, you can configure kernel's options this way:

$ make linux-menuconfig

Building Linux

Buildroot with default configurations, which are mentioned above, builds Linux images in this sequence:

  1. Download sources for a toolchain and build it.
  2. Download sources for packages, build them using the toolchain and put them in a filesystem image (rootfs).
  3. Download sources for a Linux kernel and build it using the toolchain.
  4. Link the Linux kernel against rootfs (vmlinux) or save it separately from rootfs (bzImage or uImage). Whether rootfs is linked against Linux kernel or not depends on a particular configuration. For example, snps_archs38_hsdk_defconfig configuration doesn't link rootfs against Linux kernel.

You can build images using make:

$ make

By default, Buildroot builds everything in output directory. Images are placed in output/images directory. For snps_archs38_haps_defconfig configuration you will find a couple of filesystem images (rootfs.cpio and rootfs.tar) and vmlinux - a kernel with the filesystem included:

$ ls output/images
rootfs.cpio  rootfs.tar  vmlinux

For example, for snps_archs38_hsdk_defconfig configuration you will find much more images (consider reading a guide about building Linux for HSDK for more details):

$ ls -1 output/images
boot.vfat
rootfs.ext2
rootfs.ext4
sdcard.img
u-boot
u-boot.bin
uImage
uboot-env.bin
Clone this wiki locally