This PowerShell script automates the process of generating images for your Plex/Jellyfin/Emby media library. Leveraging information from your Plex/Jellyfin/Emby library, such as movie or show titles, season and episode data, it fetches relevant artwork from Fanart.tv, TMDB, TVDB, Plex and IMDB. The script is able to focus on artwork with specific languages to grab. By default, textless artwork xx
is retrieved and will fall back to en
if textless is not found. This is a setting a user can decide on, either to focus on textless or on text posters. It also offers both automatic and manual modes for generating posters. The manual mode can accommodate custom creations that cannot be bulk retrieved.
Note
Posterizarr is cross-platform ready, meaning it can run on Linux (also arm), Docker (Ubuntu 22.04 Base Image) does not work on ARM, unRAID and on Windows operating systems.
Supported Poster Types:
- Movie/Show Posters
- Movie/Show Backgrounds
- Season Posters
- TitleCards
Tip
Here is an installation walkthrough
Important
You do not have to redeploy the container if the script version changes because it is not part of the container. Container rebuilds only happen when there are changes to the ImageMagick, PowerShell, or other prerequisite versions.
Do not enable more then one media server.
If you want to install it on ARM please follow this carefully ARM prerequisites
Warning
- The
temp
Folder gets cleared on every Script run, so do not put files into it. - Apprise integration only works in docker container, please use discord on other platforms (discord also works on docker).
- Please start the script as Admin on first run, otherwise the script is not able to install the prerequisites.
Tip
If you want to use the created assets with Kometa (formerly PMM) make sure to check out the Assets doc
You can find an example config for the Assets on my Kometa-Configs repo
-
Upload to Plex: If you do not have Kometa, posterizarr can directly Upload that Artwork to Plex.
-
Upload to Jellyfin: Posterizarr can directly upload the artwork to Jellyfin.
-
Upload to Emby: Posterizarr can directly upload the artwork to Emby.
-
Resizing: It automatically resizes every poster to 2000x3000.
-
Overlays: If you choose to, downloaded images will automatically have borders, text, and a gradient overlay applied.
- Here are some gradient overlays that you can use instead of the default one gradient-zip
-
Automatic Library Search: The script autonomously searches for libraries within your Plex/Jellyfin/Emby server, enhancing its usability.
-
Handling Multiple Versions: It adeptly manages multiple versions of a movie/show, ensuring comprehensive coverage.
-
CSV Export: Produces an impressive CSV file containing all queried movie/show information during the script's runtime in
$ScriptRoot\logs\PlexLibexport.csv
or$ScriptRoot\logs\OtherMediaServerLibExport.csv
-
Logging Capabilities: Records valuable information to a file in
$ScriptRoot\logs\Scriptlog.log
, facilitating troubleshooting and analysis.- It also generates a log with the output of every imagemagick command
$ScriptRoot\logs\ImageMagickCommands.log
. - Additionally, an
ImageChoices.csv
file is generated to store all the selected download options and essential information. - Send notification via apprise or discord Click here for Example pictures..
- It also generates a log with the output of every imagemagick command
-
Cross-platform Compatibility: Ensures seamless operation across Linux, Docker, and Windows Plex/Jellyfin/Emby servers, enhancing versatility.
-
Poster/Background/TitleCard Creation: It searches fanart/tmdb/tvdb/Plex for posters/backgrounds/titlecards and resizes the downloaded image to 3840x2160 (for titlecards and backgrounds) or 2000x3000 (for posters), fallback is grabbing artwork from imdb.
Note
Upon initial execution, the script may take some time to run as it compiles necessary data. Subsequent runs will look at whether a poster in the AssetPath is missing and only create missing posters, bypassing existing assets in the directory. If you are unhappy with the downloaded artwork, delete it in the AssetPath directory, rerun and the script will populate the missing artwork.
Important
Requirements:
Before utilizing the script, ensure the following prerequisites are installed and configured:
- TMDB API Read Access Token: Obtain TMDB API Token - NOTE the TMDB API Read Access Token is the really, really long one
- Fanart Personal API Key: Obtain Fanart API Key
- TVDB API Key: Obtain TVDB API Key - Do not use
"Legacy API Key"
, it only works with a Project Api Key.- ImageMagick: - Version 7.x is required - The script handles downloading and using a portable version of ImageMagick for all platforms. (You may need to run the Script as Admin on first run). If you prefer to reference your own installation or prefer to download and install it yourself, goto: Download ImageMagick
- Powershell Version: 5.x or higher (Docker Image uses v7.4.2).
-
Open
config.example.json
located in the script directory. -
Update the following variables with your API keys and preferences:
ApiPart:
tvdbapi
: Your TVDB Project API key.tmdbtoken
: Your TMDB API Read Access Token.FanartTvAPIKey
: Your Fanart personal API key.PlexToken
: Your Plex token (Leave empty if not applicable).JellyfinAPIKey
: Your Jellyfin API key. (You can create an API key from inside Jellyfin at Settings > Advanced > Api Keys.)EmbyAPIKey
: Your Emby API key. (You can create an API key from inside Emby at Settings > Advanced > Api Keys.)FavProvider
: Set your preferred provider (default istmdb
).-
possible values are:
tmdb
(recommended)fanart
tvdb
plex
(Not recommended)- if you prefer textless, do not set plex as fav provider as i cannot query if it has text or not.
- that beeing said, plex should act as last resort like IMDB does for Movies and not as fav provider.
-
WidthHeightFilter
: If set totrue
, an additional resolution filter will be applied to Posters/Backgrounds (TMDB and TVDB) and Titlecards (only on TMDB) searches.PosterMinWidth
: Minimum poster width filter—greater than or equal to:2000
(default value)PosterMinHeight
: Minimum poster height filter—greater than or equal to:3000
(default value)BgTcMinWidth
: Minimum background/titlecard width filter—greater than or equal to:3840
(default value)BgTcMinHeight
: Minimum background/titlecard height filter—greater than or equal to:2160
(default value)tmdb_vote_sorting
: Picture sorting via TMDB api, either byvote_average
,vote_count
or byprimary
(Default value is:vote_average
).primary
= default tmdb view (like on the website)
PreferredLanguageOrder
: Specify language preferences. Default isxx,en,de
(xx
is Textless). Example configurations can be found in the config file. 2-digit language codes can be found here: ISO 3166-1 Lang Codes.- If you set it to
xx
you tell the script it should only search for textless, posters with text will be skipped.
- If you set it to
PreferredSeasonLanguageOrder
: Specify language preferences for seasons. Default isxx,en,de
(xx
is Textless). Example configurations can be found in the config file. 2-digit language codes can be found here: ISO 3166-1 Lang Codes.- If you set it to
xx
you tell the script it should only search for textless, posters with text will be skipped.
- If you set it to
PlexPart:
LibstoExclude
: Libraries, by name, to exclude from processing.PlexUrl
: Plex server URL (i.e. "http://192.168.1.1:32400" or "http://myplexserver.com:32400").UsePlex
: If set totrue
, you tell the script to use a Plex Server (Default value is:true
)UploadExistingAssets
: If set totrue
, the script will check local assets and upload them to Plex, but only if Plex does not already have EXIF data from Posterizarr, Kometa, or TCM for the artwork being uploaded.
JellyfinPart:
LibstoExclude
: Libraries, by local folder name, to exclude from processing.JellyfinUrl
: Plex server URL (i.e. "http://192.168.1.1:8096" or "http://myplexserver.com:8096").UseJellyfin
: If set totrue
, you tell the script to use a Jellyfin Server (Default value is:false
)- Also have a look at the hint: Jellyfin CSS
UploadExistingAssets
: If set totrue
, the script will check local assets and upload them to Jellyfin, but only if Jellyfin does not already have EXIF data from Posterizarr, Kometa, or TCM for the artwork being uploaded.
EmbyPart:
LibstoExclude
: Libraries, by local folder name, to exclude from processing.EmbyUrl
: Plex server URL (i.e. "http://192.168.1.1:8096/emby" or "http://myplexserver.com:8096/emby").UseEmby
: If set totrue
, you tell the script to use a Emby Server (Default value is:false
)UploadExistingAssets
: If set totrue
, the script will check local assets and upload them to Emby, but only if Emby does not already have EXIF data from Posterizarr, Kometa, or TCM for the artwork being uploaded.
Notification:
SendNotification
: Set totrue
if you want to send notifications via discord or apprise, elsefalse
.AppriseUrl
: Only possible on Docker -Url for apprise provider -> See Docs.Discord
: Discord Webhook Url.
PrerequisitePart:
-
AssetPath
: Path to store generated posters. -
PlexUpload
: If set totrue
, Posterizarr will directly upload the artwork to Plex (handy if you do not use Kometa). -
show_skipped
: If set totrue
, verbose logging of already created assets will be displayed; otherwise, they will be silently skipped - On large libraries, this may appear as if the script is hanging. -
magickinstalllocation
: Path to ImageMagick installation location wheremagick.exe
is located (Otherwise leave value as"./magick"
)- The container handles this part on his own, you can leave it as it is in config.
-
maxLogs
: Number of Log folders you want to keep inRotatedLogs
Folder (Log History). -
logLevel
: Sets the verbosity of logging. 1 logs Warning/Error messages. Default is 2 which logs Info/Warning/Error messages. 3 captures Info/Warning/Error/Debug messages and is the most verbose. -
font
: Font file name. -
RTLfont
: RTL Font file name. (Right To Left - Currently only works under Windows, there is a bug on container) -
backgroundfont
: Background font file name. -
overlayfile
: Overlay file name. -
seasonoverlayfile
: Season overlay file name. -
backgroundoverlayfile
: Background overlay file name. -
titlecardoverlayfile
: Title Card overlay file name. -
LibraryFolders
: Set tofalse
for asset structure in one flat folder ortrue
to split into library media folders like Kometa needs it. -
Posters
: Set totrue
to create movie/show posters. -
NewLineOnSpecificSymbols
: Set totrue
to enable automatic insertion of a newline character at each occurrence of specific symbols inNewLineSymbols
within the title text. -
NewLineSymbols
: A list of symbols that will trigger a newline insertion whenNewLineOnSpecificSymbols
is set totrue
. Separate each symbol with a comma (e.g., " - ", ":"). -
SeasonPosters
: Set totrue
to also create season posters. -
BackgroundPosters
: Set totrue
to also create background posters. -
TitleCards
: Set totrue
to also create title cards. -
SkipTBA
: Set totrue
to skip TitleCard creation if the Titletext isTBA
. -
SkipJapTitle
: Set totrue
to skip TitleCard creation if the Titletext isJap or Chinese
. -
AssetCleanup
: Set totrue
to cleanup Assets that are no longer in Plex.- !! IMPORTANT !! - Risk of Data Loss from excluded Libraries: When you exclude libraries, any assets within these locations may be inadvertently deleted. This happens because the script interprets these assets as "not needed anymore" during its execution since they are not found or listed as part of the active scan. Ensure that all active asset libraries are included when using that setting on true to prevent unintended deletions.
-
AutoUpdateIM
: Set totrue
to AutoUpdate Imagemagick Portable Version (Does not work with Docker/Unraid).- Doing this could break things, cause you then uses IM Versions that are not tested with Posterizarr.
OverlayPart:
ImageProcessing
: Set totrue
if you want the ImageMagick part; if false, it only downloads the posters.outputQuality
: Image output quality, default is92%
if you set it to100%
the image size gets doubled.
PosterOverlayPart:
fontAllCaps
: Set totrue
for all caps text, elsefalse
.AddBorder
: Set totrue
to add a border to the image.AddText
: Set totrue
to add text to the image.AddTextStroke
: Set totrue
to add stroke to text.strokecolor
: Color of text stroke.strokewidth
: Stroke width.AddOverlay
: Set totrue
to add the defined overlay file to the image.fontcolor
: Color of font text.bordercolor
: Color of border.minPointSize
: Minimum size of text in poster.maxPointSize
: Maximum size of text in poster.borderwidth
: Border width.MaxWidth
: Maximum width of text box.MaxHeight
: Maximum height of text box.text_offset
: Text box offset from the bottom of the picture.
SeasonPosterOverlayPart:
fontAllCaps
: Set totrue
for all caps text, elsefalse
.AddBorder
: Set totrue
to add a border to the image.AddText
: Set totrue
to add text to the image.AddShowTitletoSeason
: if set totrue
it will add show title to season poster (Default Value is:false
)SeasonTextNewLines
: How many line breaks you want after the season title, possible values are:1
or2
(Default Value is:1
)
AddTextStroke
: Set totrue
to add stroke to text.strokecolor
: Color of text stroke.strokewidth
: Stroke width.AddOverlay
: Set totrue
to add the defined overlay file to the image.fontcolor
: Color of font text.bordercolor
: Color of border.minPointSize
: Minimum size of text in poster.maxPointSize
: Maximum size of text in poster.borderwidth
: Border width.MaxWidth
: Maximum width of text box.MaxHeight
: Maximum height of text box.text_offset
: Text box offset from the bottom of the picture.
BackgroundOverlayPart:
fontAllCaps
: Set totrue
for all caps text, elsefalse
.AddBorder
: Set totrue
to add a border to the background image.AddText
: Set totrue
to add text to the background image.AddTextStroke
: Set totrue
to add stroke to text.strokecolor
: Color of text stroke.strokewidth
: Stroke width.AddOverlay
: Set totrue
to add the defined background overlay file to the background image.fontcolor
: Color of font text.bordercolor
: Color of border.minPointSize
: Minimum size of text in background image.maxPointSize
: Maximum size of text in background image.borderwidth
: Border width.MaxWidth
: Maximum width of text box in background image.MaxHeight
: Maximum height of text box in background image.text_offset
: Text box offset from the bottom of the background image.
TitleCardOverlayPart:
UseBackgroundAsTitleCard
: Set totrue
if you prefer show background as TitleCard, default isfalse
where it uses episode image as TitleCard.BackgroundFallback
: Set tofalse
if you want to skip Background fallback for TitleCard images if no TitleCard was found.AddOverlay
: Set totrue
to add the defined TitleCard overlay file to the TitleCard image.AddBorder
: Set totrue
to add a border to the TitleCard image.borderwidth
: Border width.bordercolor
: Color of border.
TitleCardTitleTextPart:
AddEPTitleText
: Set totrue
to add episode title text to the TitleCard image.AddTextStroke
: Set totrue
to add stroke to text.strokecolor
: Color of text stroke.strokewidth
: Stroke width.fontAllCaps
: Set totrue
for all caps text, elsefalse
.fontcolor
: Color of font text.minPointSize
: Minimum size of text in TitleCard image.maxPointSize
: Maximum size of text in TitleCard image.MaxWidth
: Maximum width of text box in TitleCard image.MaxHeight
: Maximum height of text box in TitleCard image.text_offset
: Text box offset from the bottom of the TitleCard image.
TitleCardEpisodeTextPart:
SeasonTCText
: You can Specify the default text forSeason
that appears on TitleCard.- Example:
STAFFEL 1 • EPISODE 5
or"SÄSONG 1 • EPISODE 1"
- Example:
EpisodeTCText
: You can Specify the default text forEpisode
that appears on TitleCard.- Example:
SEASON 1 • EPISODE 5
or"SEASON 1 • AVSNITT 1"
- Example:
fontAllCaps
: Set totrue
for all caps text, elsefalse
.AddEPText
: Set totrue
to add episode text to the TitleCard image.AddTextStroke
: Set totrue
to add stroke to text.strokecolor
: Color of text stroke.strokewidth
: Stroke width.fontcolor
: Color of font text.minPointSize
: Minimum size of text in TitleCard image.maxPointSize
: Maximum size of text in TitleCard image.MaxWidth
: Maximum width of text box in TitleCard image.MaxHeight
: Maximum height of text box in TitleCard image.text_offset
: Text box offset from the bottom of the TitleCard image.
-
Rename the config file to
config.json
. -
Place the
overlay.png
, or whatever file you defined earlier inoverlayfile
, andRocky.ttf
font, or whatever font you defined earlier infont
files in the same directory as Posterizarr.ps1 which is$ScriptRoot
.
- Automatic Mode: Execute the script without any parameters to generate posters for your entire Plex library.
- Testing Mode: Run the script with the
-Testing
switch to create Test posters before you start using it. - Manual Mode: Run the script with the
-Manual
switch to create custom posters manually.
Note
- Ensure PowerShell execution policy allows script execution.
- Bugs or issues encountered during usage can be reported for resolution.
Run the script without any parameters:
.\Posterizarr.ps1
This will generate posters for your entire Plex library based on the configured settings.
The posters are all placed in AssetPath\...
. This can then be mounted in Kometa to use as the assets folder.
Tip
Have a look at the docker-compose.yml there is an example of the /assets
Volume, you either can mount the Kometa Assets dir to Posterizarr or vice versa, its up to you.
Its important that you update the containerpath you specified in your docker-compose.yml in your config.json, in my example it is /assets
.
Assuming you made the config like i did, Posterizarr will now create the Posters directly in Kometa´s Asset dir.
If you use Kometa make sure to set this settings on each Library in Kometa Config:
libraries:
4K TV Shows:
settings:
asset_directory: /assets/4K TV Shows
prioritize_assets: true
operations:
assets_for_all: true
Important
Tautulli and Posterizarr must run as a container in Docker
Note
If Discord is configured it will send a Notification on each trigger.
In this mode we use Tautulli to trigger Posterizarr for an specific item in Plex, like a new show, movie or episode got added.
To use it we need to configure a script in Tautulli, please follow these instructions.
- Make sure that you mount the
Posterizarr
directory to tautulli, cause the script needs the Path/posterizarr
volumes: - "/opt/appdata/posterizarr:/posterizarr:rw"
- Download the trigger.py from the GH and place it in the Tautulli Script dir -> Tautulli-Wiki
- You may have to set
chmod +x
to the file.
- You may have to set
- Open Tautulli and go to Settings ->
NOTIFICATION AGENTS
- Click on
Add a new notification agent
and selectScript
- Specify the script folder where you placed the script and select the script file.
- You can specify a
Description
at the bottom like i did.
- You can specify a
- Go to
Triggers
, scroll down and selectRecently Added
. - Go to
Conditions
, you can now specify when the script should get called.- In my case i specified the Media Type:
episode, movie, show and season
- I also excluded the Youtube Lib cause the videos i have there - do not have an
tmdb,tvdb or fanart ID
.- This is an recommended setting, either exclude such libs or include only those libs where Posterizarr should create art for.
- In my case i specified the Media Type:
- Next go to Arguments -> Unfold
Recently Added
Menu and paste the following Argument, after that you can save it.- Please do not change the Argument otherwise the script could fail.
<movie>RatingKey "{rating_key}" mediatype "{media_type}"</movie><show>grandparentratingkey "{grandparent_rating_key}" mediatype "{media_type}"</show><season>parentratingkey "{parent_rating_key}" grandparentratingkey "{grandparent_rating_key}" mediatype "{media_type}"</season><episode>RatingKey "{rating_key}" parentratingkey "{parent_rating_key}" grandparentratingkey "{grandparent_rating_key}" mediatype "{media_type}"</episode>
Note
If Discord is configured it will send a Notification on each trigger.
In this mode we use Tautulli to trigger Posterizarr for an specific item in Plex, like a new show, movie or episode got added.
- Open Tautulli and go to Settings ->
NOTIFICATION AGENTS
- Click on
Add a new notification agent
and selectScript
- Specify the script folder of Posterizarr and select the script file.
- Set the script timeout to
0
, which is unlimited. (The default is30
, which would kill the script before it finishes.) - You can specify a
Description
at the bottom like i did.
- Set the script timeout to
- Go to
Triggers
, scroll down and selectRecently Added
. - Go to
Conditions
, you can now specify when the script should get called.- In my case i specified the Media Type:
episode, movie, show and season
- I also excluded the Youtube Lib cause the videos i have there - do not have an
tmdb,tvdb or fanart ID
.- This is an recommended setting, either exclude such libs or include only those libs where Posterizarr should create art for.
- In my case i specified the Media Type:
- Next go to Arguments -> Unfold
Recently Added
Menu and paste the following Argument, after that you can save it.- Please do not change the Argument otherwise the script could fail.
<movie>-Tautulli -RatingKey "{rating_key}" -mediatype "{media_type}"</movie><show>-Tautulli -grandparentratingkey "{grandparent_rating_key}" -mediatype "{media_type}"</show><season>-Tautulli -parentratingkey "{parent_rating_key}" -grandparentratingkey "{grandparent_rating_key}" -mediatype "{media_type}"</season><episode>-Tautulli -RatingKey "{rating_key}" -parentratingkey "{parent_rating_key}" -grandparentratingkey "{grandparent_rating_key}" -mediatype "{media_type}"</episode>
Run the script with the -Testing
flag. In this mode, the script will create pink posters/backgrounds with short, medium, and long texts (also in CAPS), using the values specified in the config.json
file.
Tip
This is handy for testing your configuration before applying it en masse to the actual posters. You can see how and where the text would be applied, as well as the size of the textbox.
.\Posterizarr.ps1 -Testing
Important
Currently only movie/show/season poster creation integrated.
Source picture gets edited by script and is then moved to desired asset location.
Run the script with the -Manual
switch:
.\Posterizarr.ps1 -Manual
Follow the prompts to enter the source picture path (Container needs Access to it), media folder name, and movie/show title to manually create a custom poster.
-
- Change
RUN_TIME
in yaml to your needs - You need to use 24H Time Format- The Script gets executed on the Times you specified
- Before starting the scheduled run it checks if another Posterizarr process is running, if yes - the scheduled run will be skipped.
- Change
volume
andnetwork
to fit your environment (Make sure you have the same network as your plex container when you use local IP of plex) - Change
TimeZone
to yours, otherwise it will get scheduled to a different time you may want it to. - You may also have to change
PUID/PGID
If you manually want to run the Script you can do it this way:
Automatic Mode:
docker exec -it posterizarr pwsh Posterizarr.ps1
Testing Mode:
docker exec -it posterizarr pwsh Posterizarr.ps1 -Testing
Manual Mode:
docker exec -it posterizarr pwsh Posterizarr.ps1 -Manual
- Change
Tip
If you did not used pwsh
on docker exec you can do it this way.
Inside your Unraid
or Bash
or Sh
console:
pwsh Posterizarr.ps1
pwsh Posterizarr.ps1 -Manual
pwsh Posterizarr.ps1 -Testing
Tip
If you are an unRAID user, just use the Community app from @nwithan8 it is listed in Store.
- Change
RUN_TIME
to your needs - You need to use 24H Time Format- Example:
06:00
or06:00,14:00
.....
- Example:
- AssetPath in config needs to be
/assets
not the path you entered.
📝Posterizarr Excel Creation using Module1.bas:
-
Open Excel: First, open Microsoft Excel on your computer. You can do this by clicking on the Excel icon in your applications menu or by searching for "Excel" in your computer's search bar and selecting it from the results.
-
Access the Visual Basic for Applications (VBA) Editor:
- While in Excel, press
Alt + F11
on your keyboard. This keyboard shortcut will open the VBA editor window.
- While in Excel, press
-
Import Module:
- In the VBA editor window, you'll see a menu bar at the top.
- Right-click on any existing module or in the project explorer (usually located on the left-hand side).
- From the dropdown menu, select
Import File...
. - A file explorer window will open. Navigate to the location where you saved the
Module1.bas
file. - Select the
Module1.bas
file and clickOpen
.
-
Run the Macro:
- Now, go back to the Excel window.
- Look for the
View
tab at the top of the Excel window. - Click on the
View
tab. - Within the
Macros
group, you'll find a button labeledMacros
. Click on it. - In the dropdown menu, select
View Macros
. - A Macros dialog box will appear, listing all available macros.
- In the list, you should see the
PromptUser
macro. - Select
PromptUser
from the list. - Finally, click the
Run
button.
Following these steps will allow you to import the Module1.bas
file containing the VBA code into Excel and then run the PromptUser
macro.
In order to view the 16:9
episode posters without getting cropped to 3:2
, you need to set a css.
#itemDetailPage .listItemImage-large{
width:16vw;
height:9vw;
}
Tip
- It was made using this Posterizarr config.
Tip
- It was made using this Kometa config.
🔍Movie Poster & Background:
If TMDB
is your fav Provider
- TMDB
- FANART
- TVDB
- PLEX
- IMDB (Movies only)
If TVDB
is your fav Provider
- TVDB
- TMDB
- FANART
- PLEX
- IMDB (Movies only)
If FANART
is your fav Provider
- FANART
- TMDB
- TVDB
- PLEX
- IMDB (Movies only)
🔍Show Poster & Background:
If TMDB
is your fav Provider
- TMDB
- FANART
- TVDB
- PLEX
If FANART
is your fav Provider
- FANART
- TMDB
- TVDB
- PLEX
If TVDB
is your fav Provider
- TVDB
- TMDB
- FANART
- PLEX
🔍Show Season Poster:
If TMDB
is your fav Provider
- TMDB
- FANART
- TVDB
- PLEX
If FANART
is your fav Provider
- FANART
- TMDB
- TVDB
- PLEX
If TVDB
is your fav Provider
- TVDB
- TMDB
- FANART
- PLEX
🔍Show TC with Background Poster:
If TMDB
is your fav Provider
- TMDB
- TVDB
- FANART
- PLEX
Else
- TVDB
- TMDB
- FANART
- PLEX
🔍Show TC Poster:
If TMDB
is your fav Provider
- TMDB
- TVDB
- PLEX
Else
- TVDB
- TMDB
- PLEX
Feel free to customize the script further to meet your specific preferences or automation requirements.
Important
- Adjust on each PR the version number in script on Line 11
$CurrentScriptVersion = "1.0.55"
- Adjust the version number in Release.txt to match the one in script.
- this is required because the script checks against this file if a newer version is available.
- Do not include images on a PR.