-
Notifications
You must be signed in to change notification settings - Fork 4
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Unable to read heatingPower state #7
Comments
@holli73 Can you try https://github.com/gaetancollaud/digitalstrom-mqtt/releases/tag/1.3.1 please? I don't have any blue devices. I try to rename the channel when reading the state: f1f38cd |
i still have error messages f.ex. i use just the black joker for my infrared heating and is assigend to blue group (heating)
if look on the system/tree for that device it looks like this:
hope this all makes somehow sense and thanks a lot for your time responsiveness. best regards |
hello, sorry for the delay - here is the result of both queries. include-all.json.txt would it be possible to publish the received scene calls as well to mqtt - so i can react on that event? thanks |
No worries for the delay. It seems that we have the For the scene, please open a new ticket. I was first against using scenes altogether since I wanted to target devices directly. But we can discuss it. |
Hello guys, any update on this issue? In my setup I also have Heating-devices with the same problems - It seems, it fails to read "OutputChannels" digitalstrom-mqtt Log:
Querying the DS-API, i get: /json/device/getOutputValue?dsid=302ed89f43f00e80000356e6&offset=0
and: /json/device/getOutputChannelValue?dsid=302ed89f43f00e80000356e6&channels=heatingPower
Kind regards, |
No progress so far. The value is not available in the status tree and we're still waiting for the documentation of the new API. :( |
Hello, digitalstrom-mqtt now uses the new digitalstrom API. Can someone with heating control devices run this command and show me the result: curl -k -X GET --location "https://HOSTNAME:8080/api/v1/apartment?include=installation,dsDevices,submodules,functionBlocks,zones,clusters,applications,dsServer,controllers,apiRevision,meterings" -H "Authorization: Bearer API_KEY" For the API key, refer to the README I would like to see how the BL devices are shown. |
Hi, I have some BL-KM200 devices and here are the result of the API request: As a side question, do you know if it is possible to get the value of the FTW04 dS devices (temperature and humidity sensor) ?
|
Hi @jtognazzi thank you very much, that helps. But apparently there is no output available for the BL devices 😞 I've no idea how they work. One thing is for sure, we cannot actuate them through the API. I think I will close this issue as "won't fix" since there is nothing we can do either with the old or new API. Regarding your request for the FTW04 device I opened #49 . Could you please run the command so I can have an example of the status response. I don't own any sensor devices from digitalstrom so I cannot test it myself. |
Follow up of #6 regarding the
heatingPower
output channel.For blue devices,
heatingPower
is advertised as output channel when we list the devices. It's also possible to command the output via this channel (0 for off or 100 for on).However, it seems that it's not possible to get the state of the channel
heatingPower
via the system tree. But there is a channelpowerState
.Maybe a simple solution would be to rename
heatingPower
topowerState
when we request the state, but I'm not sure if it's a good solution...The text was updated successfully, but these errors were encountered: