-
Notifications
You must be signed in to change notification settings - Fork 2
/
README.md~
43 lines (33 loc) · 1.6 KB
/
README.md~
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
# CC1101
CC1101 driver for TMS320C6713 DSK
CC1101 driver for C6713 DSK
(Co)Author: Stefan Gvozdenovic
gefa12 et gmail dot com
Creation date: 05/19/2015
Description: The Code is based on the panstamp CC1101 library for Arduino. This code
demonstrates transmission and reception (without interrupts) of
arbitrary data length/type from the CC1101 radio chip attached to the
GPIO pins of the 6713 through J1 extension header. The SPI between radio
and 6713 is implemented by bit-banging the GPIO. Two C6713 DSKs and two CC1101
radios are needed for this demo.
CC1101 Sub-1GHz Transceiver
Current radio settings for the radio can be found in the cc1101.h file. To change these
settings simply copy/paste the exported registers from smartRF studio.
Basic current settings:
* Base frequency: 315MHz
* Modulation format: GFSK
* Data rate: 50kBaud
* Deviation: 25kHz
* Channel number: 0
* Channel spacing: 200KHz
* TX power: 12dBm
GPIOs that bit-bang SPI are defined in bitbang_spi.h header file.
* SCK GPIO_13
* MOSI GPIO_3
* MISO GPIO_8
* CS GPIO_0
* GDO0 GPIO_9
More about J1 expansion header: [C6713 DSK Technical Reference](http://c6000.spectrumdigital.com/dsk6713/revc/files/6713_dsk_techref.pdf#page=28)
More about the RF Transceiver Module RF1101SE pinout: [Erwan's blog](http://labalec.fr/erwan/?p=497)
Note that in order for SPI to work GPIOs have to be functional therefore SWITCH 4 OF THE DIPSWITCH SW3 (NOT SW1!!!) HAS TO BE ON-CLOSED
