-
Notifications
You must be signed in to change notification settings - Fork 7
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Need to use LiquidCrystal_I2C #26
Comments
Hi @kabidey,
if you can tell me which I2C screen you have then I might be able to help. As the screen I used (Grove) is already I2C, it might be not too difficult to make the changes.
Ideally your screen will be supported by the menu library I use:
https://github.com/neu-rah/ArduinoMenu
Merry Xmas!
Graham (replying via email - hope it renders OK. I will have more time to look after xmas).
… On 24 Dec 2022, at 18:49, kabidey ***@***.***> wrote:
Hi Graham, i am not good with modifying the codes, need the thing modified to display in 1602 I2C, i cannot do it. Please help.
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>
|
My display is the parallel 1602 lcd display with a I2C adapter soldered.
On Sun, Dec 25, 2022, 12:46 AM Graham Whaley ***@***.***>
wrote:
… Hi @kabidey,
if you can tell me which I2C screen you have then I might be able to help.
As the screen I used (Grove) is already I2C, it might be not too difficult
to make the changes.
Ideally your screen will be supported by the menu library I use:
https://github.com/neu-rah/ArduinoMenu
Merry Xmas!
Graham (replying via email - hope it renders OK. I will have more time to
look after xmas).
> On 24 Dec 2022, at 18:49, kabidey ***@***.***> wrote:
>
>
> Hi Graham, i am not good with modifying the codes, need the thing
modified to display in 1602 I2C, i cannot do it. Please help.
> —
> Reply to this email directly, view it on GitHub, or unsubscribe.
> You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
—
Reply to this email directly, view it on GitHub
<#26 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO62TFCCH2U67OXNE6Z534DWO5DYVANCNFSM6AAAAAATISNOME>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Thanks @kabidey,
I think you will probably want to use the ' • HD44780 I2C’ support from the F Malpartida's LCDs :
https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
A very good first step will be to see if you can get the arduino menu examples working , for instance, for your screen probably try:
https://github.com/neu-rah/ArduinoMenu/tree/master/examples/LCD_Malpartida/I2C/I2C
If you get that working, you are probably 75% of the way to getting DSPham working on your display. The other thing you will need to modify in DSPham is the ‘lcd.cpp’ to change from using the ‘rgb_lcd’ driver to using the malpartida I2C or similar driver. https://github.com/grahamwhaley/DSPham/blob/master/lcd.cpp
Graham
… On 24 Dec 2022, at 19:40, kabidey ***@***.***> wrote:
My display is the parallel 1602 lcd display with a I2C adapter soldered.
On Sun, Dec 25, 2022, 12:46 AM Graham Whaley ***@***.***>
wrote:
> Hi @kabidey,
> if you can tell me which I2C screen you have then I might be able to help.
> As the screen I used (Grove) is already I2C, it might be not too difficult
> to make the changes.
>
> Ideally your screen will be supported by the menu library I use:
> https://github.com/neu-rah/ArduinoMenu
>
> Merry Xmas!
> Graham (replying via email - hope it renders OK. I will have more time to
> look after xmas).
>
> > On 24 Dec 2022, at 18:49, kabidey ***@***.***> wrote:
> >
> >
> > Hi Graham, i am not good with modifying the codes, need the thing
> modified to display in 1602 I2C, i cannot do it. Please help.
> > —
> > Reply to this email directly, view it on GitHub, or unsubscribe.
> > You are receiving this because you are subscribed to this thread.Message
> ID: ***@***.***>
>
> —
> Reply to this email directly, view it on GitHub
> <#26 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AO62TFCCH2U67OXNE6Z534DWO5DYVANCNFSM6AAAAAATISNOME>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you commented.Message ID: ***@***.***>
|
I tried, but could not do it. So I ordered a grove LCD ;)
On Sun, Dec 25, 2022 at 1:23 AM Graham Whaley ***@***.***>
wrote:
… Thanks @kabidey,
I think you will probably want to use the ' • HD44780 I2C’ support from
the F Malpartida's LCDs :
https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
A very good first step will be to see if you can get the arduino menu
examples working , for instance, for your screen probably try:
https://github.com/neu-rah/ArduinoMenu/tree/master/examples/LCD_Malpartida/I2C/I2C
If you get that working, you are probably 75% of the way to getting DSPham
working on your display. The other thing you will need to modify in DSPham
is the ‘lcd.cpp’ to change from using the ‘rgb_lcd’ driver to using the
malpartida I2C or similar driver.
https://github.com/grahamwhaley/DSPham/blob/master/lcd.cpp
Graham
> On 24 Dec 2022, at 19:40, kabidey ***@***.***> wrote:
>
>
> My display is the parallel 1602 lcd display with a I2C adapter soldered.
>
> On Sun, Dec 25, 2022, 12:46 AM Graham Whaley ***@***.***>
> wrote:
>
> > Hi @kabidey,
> > if you can tell me which I2C screen you have then I might be able to
help.
> > As the screen I used (Grove) is already I2C, it might be not too
difficult
> > to make the changes.
> >
> > Ideally your screen will be supported by the menu library I use:
> > https://github.com/neu-rah/ArduinoMenu
> >
> > Merry Xmas!
> > Graham (replying via email - hope it renders OK. I will have more time
to
> > look after xmas).
> >
> > > On 24 Dec 2022, at 18:49, kabidey ***@***.***> wrote:
> > >
> > >
> > > Hi Graham, i am not good with modifying the codes, need the thing
> > modified to display in 1602 I2C, i cannot do it. Please help.
> > > —
> > > Reply to this email directly, view it on GitHub, or unsubscribe.
> > > You are receiving this because you are subscribed to this
thread.Message
> > ID: ***@***.***>
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
#26 (comment)>,
> > or unsubscribe
> > <
https://github.com/notifications/unsubscribe-auth/AO62TFCCH2U67OXNE6Z534DWO5DYVANCNFSM6AAAAAATISNOME
>
> > .
> > You are receiving this because you were mentioned.Message ID:
> > ***@***.***>
> >
> —
> Reply to this email directly, view it on GitHub, or unsubscribe.
> You are receiving this because you commented.Message ID: ***@***.***>
—
Reply to this email directly, view it on GitHub
<#26 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO62TFFQODH3UCC56KIOAUTWO5IEVANCNFSM6AAAAAATISNOME>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
OK @kabidey, thanks for letting me know. Shall we close this Issue now, and you can open a new one if you get stuck with the new display?
… On 26 Dec 2022, at 20:51, kabidey ***@***.***> wrote:
I tried, but could not do it. So I ordered a grove LCD ;)
On Sun, Dec 25, 2022 at 1:23 AM Graham Whaley ***@***.***>
wrote:
> Thanks @kabidey,
>
> I think you will probably want to use the ' • HD44780 I2C’ support from
> the F Malpartida's LCDs :
> https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
>
> A very good first step will be to see if you can get the arduino menu
> examples working , for instance, for your screen probably try:
>
>
> https://github.com/neu-rah/ArduinoMenu/tree/master/examples/LCD_Malpartida/I2C/I2C
>
> If you get that working, you are probably 75% of the way to getting DSPham
> working on your display. The other thing you will need to modify in DSPham
> is the ‘lcd.cpp’ to change from using the ‘rgb_lcd’ driver to using the
> malpartida I2C or similar driver.
> https://github.com/grahamwhaley/DSPham/blob/master/lcd.cpp
>
> Graham
>
> > On 24 Dec 2022, at 19:40, kabidey ***@***.***> wrote:
> >
> >
> > My display is the parallel 1602 lcd display with a I2C adapter soldered.
> >
> > On Sun, Dec 25, 2022, 12:46 AM Graham Whaley ***@***.***>
> > wrote:
> >
> > > Hi @kabidey,
> > > if you can tell me which I2C screen you have then I might be able to
> help.
> > > As the screen I used (Grove) is already I2C, it might be not too
> difficult
> > > to make the changes.
> > >
> > > Ideally your screen will be supported by the menu library I use:
> > > https://github.com/neu-rah/ArduinoMenu
> > >
> > > Merry Xmas!
> > > Graham (replying via email - hope it renders OK. I will have more time
> to
> > > look after xmas).
> > >
> > > > On 24 Dec 2022, at 18:49, kabidey ***@***.***> wrote:
> > > >
> > > >
> > > > Hi Graham, i am not good with modifying the codes, need the thing
> > > modified to display in 1602 I2C, i cannot do it. Please help.
> > > > —
> > > > Reply to this email directly, view it on GitHub, or unsubscribe.
> > > > You are receiving this because you are subscribed to this
> thread.Message
> > > ID: ***@***.***>
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <
> #26 (comment)>,
> > > or unsubscribe
> > > <
> https://github.com/notifications/unsubscribe-auth/AO62TFCCH2U67OXNE6Z534DWO5DYVANCNFSM6AAAAAATISNOME
> >
> > > .
> > > You are receiving this because you were mentioned.Message ID:
> > > ***@***.***>
> > >
> > —
> > Reply to this email directly, view it on GitHub, or unsubscribe.
> > You are receiving this because you commented.Message ID: ***@***.***>
>
> —
> Reply to this email directly, view it on GitHub
> <#26 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AO62TFFQODH3UCC56KIOAUTWO5IEVANCNFSM6AAAAAATISNOME>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you commented.Message ID: ***@***.***>
|
Sure, thanks
On Tue, Dec 27, 2022, 4:29 AM Graham Whaley ***@***.***>
wrote:
… OK @kabidey, thanks for letting me know. Shall we close this Issue now,
and you can open a new one if you get stuck with the new display?
> On 26 Dec 2022, at 20:51, kabidey ***@***.***> wrote:
>
>
> I tried, but could not do it. So I ordered a grove LCD ;)
>
> On Sun, Dec 25, 2022 at 1:23 AM Graham Whaley ***@***.***>
> wrote:
>
> > Thanks @kabidey,
> >
> > I think you will probably want to use the ' • HD44780 I2C’ support from
> > the F Malpartida's LCDs :
> > https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
> >
> > A very good first step will be to see if you can get the arduino menu
> > examples working , for instance, for your screen probably try:
> >
> >
> >
https://github.com/neu-rah/ArduinoMenu/tree/master/examples/LCD_Malpartida/I2C/I2C
> >
> > If you get that working, you are probably 75% of the way to getting
DSPham
> > working on your display. The other thing you will need to modify in
DSPham
> > is the ‘lcd.cpp’ to change from using the ‘rgb_lcd’ driver to using the
> > malpartida I2C or similar driver.
> > https://github.com/grahamwhaley/DSPham/blob/master/lcd.cpp
> >
> > Graham
> >
> > > On 24 Dec 2022, at 19:40, kabidey ***@***.***> wrote:
> > >
> > >
> > > My display is the parallel 1602 lcd display with a I2C adapter
soldered.
> > >
> > > On Sun, Dec 25, 2022, 12:46 AM Graham Whaley ***@***.***>
> > > wrote:
> > >
> > > > Hi @kabidey,
> > > > if you can tell me which I2C screen you have then I might be able
to
> > help.
> > > > As the screen I used (Grove) is already I2C, it might be not too
> > difficult
> > > > to make the changes.
> > > >
> > > > Ideally your screen will be supported by the menu library I use:
> > > > https://github.com/neu-rah/ArduinoMenu
> > > >
> > > > Merry Xmas!
> > > > Graham (replying via email - hope it renders OK. I will have more
time
> > to
> > > > look after xmas).
> > > >
> > > > > On 24 Dec 2022, at 18:49, kabidey ***@***.***> wrote:
> > > > >
> > > > >
> > > > > Hi Graham, i am not good with modifying the codes, need the thing
> > > > modified to display in 1602 I2C, i cannot do it. Please help.
> > > > > —
> > > > > Reply to this email directly, view it on GitHub, or unsubscribe.
> > > > > You are receiving this because you are subscribed to this
> > thread.Message
> > > > ID: ***@***.***>
> > > >
> > > > —
> > > > Reply to this email directly, view it on GitHub
> > > > <
> >
#26 (comment)>,
> > > > or unsubscribe
> > > > <
> >
https://github.com/notifications/unsubscribe-auth/AO62TFCCH2U67OXNE6Z534DWO5DYVANCNFSM6AAAAAATISNOME
> > >
> > > > .
> > > > You are receiving this because you were mentioned.Message ID:
> > > > ***@***.***>
> > > >
> > > —
> > > Reply to this email directly, view it on GitHub, or unsubscribe.
> > > You are receiving this because you commented.Message ID: ***@***.***>
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
#26 (comment)>,
> > or unsubscribe
> > <
https://github.com/notifications/unsubscribe-auth/AO62TFFQODH3UCC56KIOAUTWO5IEVANCNFSM6AAAAAATISNOME
>
> > .
> > You are receiving this because you were mentioned.Message ID:
> > ***@***.***>
> >
> —
> Reply to this email directly, view it on GitHub, or unsubscribe.
> You are receiving this because you commented.Message ID: ***@***.***>
—
Reply to this email directly, view it on GitHub
<#26 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AO62TFG6ZRHPKKGNR43W6U3WPIPOHANCNFSM6AAAAAATISNOME>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hi Graham, i am not good with modifying the codes, need the thing modified to display in 1602 I2C, i cannot do it. Please help.
The text was updated successfully, but these errors were encountered: