Continued GPU sensors errors.

[GoogleCodeExporter]

What steps will reproduce the problem?
see issue 15

What is the expected output? What do you see instead?
Expect to see GPU temp data for both active GPUs

[max@arch-desktop:~]$ inxi -sx
Sensors:   System Temperatures: cpu: 37.0C mobo: 33.0C gpu: 0.0: 
           Fan Speeds (in rpm): cpu: 1320 mobo: 1020 sys-1: 0 


What version of the product are you using? On what operating system?
[max@arch-desktop:~]$ inxi -SI
System:    Host arch-desktop Kernel 2.6.31-ARCH x86_64 (64 bit) Distro Arch 
Linux
Info:      Processes 146 Uptime 57 min Memory 451.4/3960.4MB Client Shell 
inxi 1.2.6 


Please paste your inxi output below.

System:    Host arch-desktop Kernel 2.6.31-ARCH x86_64 (64 bit) Distro Arch 
Linux
CPU:       Quad core Intel Core2 Quad Q6600 (SMP) cache 4096 KB flags (sse3 
nx lm vmx) bmips 19212 
           Clock Speeds: (1) 2400.478 MHz (2) 2400.478 MHz (3) 2400.478 MHz 
(4) 2400.478 MHz
Graphics:  Card-1 nVidia G86 [GeForce 8500 GT] Card-3 nVidia G73 [GeForce 
7600 GT] X.Org 1.7.1.901 Res: 1680x1050@50.0hz 
           GLX Renderer GeForce 8500 GT/PCI/SSE2, GeForce 7600 GT/PCI/SSE2 
GLX Version 3.2.0 NVIDIA 190.42, 2.1.2 NVIDIA 190.42 Direct Rendering Yes
Audio:     Card nVidia MCP55 High Definition Audio driver HDA Intel
           Sound: Advanced Linux Sound Architecture Version 1.0.20
Network:   Card-1 Atheros AR5001 Wireless Network Adapter driver ath5k v: 
0.6.0
           Card-2 2x nVidia MCP55 Ethernet driver forcedethforcedeth at 
ports ec00 eb00 
Disks:     HDD Total Size: 750.2GB (9.7% used) 1: /dev/sda ST3250410AS 
250.1GB 
           2: USB /dev/sdf 5000AAV External 500.1GB 
Partition: ID:/ size: 19G used: 7.3G (42%) fs: ext3 ID:/home size: 93G 
used: 26G (30%) fs: ext4 
           ID:swap-1 size: 1.14GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 39.0C mobo: 33.0C gpu: 0.0: 
           Fan Speeds (in rpm): cpu: 1260 mobo: 1020 sys-1: 0 
Info:      Processes 146 Uptime 58 min Memory 451.7/3960.4MB Client Shell 
inxi 1.2.6 


Please paste your 'cat /proc/cpuinfo' output below.
please paste your 'cat /proc/meminfo' output below.
Believe those 2 ^^ to be unimportant.

please paste your 'sensors' output below.
[max@arch-desktop:~]$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +51.0°C  (high = +82.0°C, crit = +100.0°C)  

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +42.0°C  (high = +82.0°C, crit = +100.0°C)  

coretemp-isa-0002
Adapter: ISA adapter
Core 2:      +46.0°C  (high = +82.0°C, crit = +100.0°C)  

coretemp-isa-0003
Adapter: ISA adapter
Core 3:      +40.0°C  (high = +82.0°C, crit = +100.0°C)  

abituguru3-isa-00e0
Adapter: ISA adapter
CPU Core:          +1.31 V  (min =  +0.00 V, max =  +1.60 V)
DDR2:              +1.84 V  (min =  +1.50 V, max =  +2.20 V)
DDR2 VTT:          +0.92 V  (min =  +0.75 V, max =  +1.10 V)
CPU VTT:           +2.40 V  (min =  +1.90 V, max =  +2.90 V)
NB 1.2V:           +1.35 V  (min =  +1.10 V, max =  +1.60 V)
SB 1.5V:           +1.53 V  (min =  +1.20 V, max =  +1.80 V)
HyperTransport:    +1.22 V  (min =  +0.95 V, max =  +1.45 V)
ATX +12V (24-Pin):+12.06 V  (min =  +9.60 V, max = +14.40 V)
ATX +12V (4-pin): +12.00 V  (min =  +9.60 V, max = +14.40 V)
ATX +5V:           +5.07 V  (min =  +3.99 V, max =  +6.00 V)
ATX +3.3V:         +3.32 V  (min =  +2.64 V, max =  +3.94 V)
ATX 5VSB:          +5.13 V  (min =  +3.99 V, max =  +6.00 V)
CPU FAN:          1320 RPM  (min =  300 RPM)
SYS FAN:          1020 RPM  (min =  300 RPM)
AUX1 FAN:            0 RPM  (min =  300 RPM)  ALARM
AUX2 FAN:            0 RPM  (min =  300 RPM)  ALARM
AUX3 FAN:            0 RPM  (min =  300 RPM)  ALARM
CPU:               +38.0°C  (high = +75.0°C, crit = +85.0°C)  
System:            +33.0°C  (high = +55.0°C, crit = +65.0°C)  
PWM Phase1:        +51.0°C  (high = +125.0°C, crit = +135.0°C)  
PWM Phase2:        +52.0°C  (high = +125.0°C, crit = +135.0°C)  
PWM Phase3:        +51.0°C  (high = +125.0°C, crit = +135.0°C)  
PWM Phase4:        +51.0°C  (high = +125.0°C, crit = +135.0°C)  
PWM Phase5:        +50.0°C  (high = +125.0°C, crit = +135.0°C) 


____________________
Also posting nvidia info...
--------------------
[max@arch-desktop:~]$ nvidia-settings -c :0 -q GPUCoreTemp

  Attribute 'GPUCoreTemp' (arch-desktop:0.0): 64.
    'GPUCoreTemp' is an integer attribute.
    'GPUCoreTemp' is a read-only attribute.
    'GPUCoreTemp' can use the following target types: X Screen, GPU.
  Attribute 'GPUCoreTemp' (arch-desktop:0.1): 55.
    'GPUCoreTemp' is an integer attribute.
    'GPUCoreTemp' is a read-only attribute.
    'GPUCoreTemp' can use the following target types: X Screen, GPU.

Original issue reported on code.google.com by archerse...@gmail.com on 16 Nov 2009 at 10:01

[GoogleCodeExporter]

Resolved, thank you!

[max@arch-desktop:~]$ inxi -sx
Sensors:   System Temperatures: cpu: 39.0C mobo: 34.0C gpu: 0.0:62C 0.1:53C 
           Fan Speeds (in rpm): cpu: 1320 mobo: 1020 sys-1: 0 

Original comment by archerse...@gmail.com on 17 Nov 2009 at 4:00

[GoogleCodeExporter]

Fixed for nvidia and I think fglrx run gpus. 

Original comment by inxi-...@techpatterns.com on 26 Dec 2009 at 9:47

• Changed state: Fixed