Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

preinit-mounts: Add check for overlay file errors #59

Merged
merged 1 commit into from Oct 23, 2019
Merged

preinit-mounts: Add check for overlay file errors #59

merged 1 commit into from Oct 23, 2019

Conversation

anoo1
Copy link
Contributor

@anoo1 anoo1 commented Oct 21, 2019

During a downgrade, errors from the overlay files have been seen.
Try to recreate the overlay when this happens by re-copying the
files into /etc.

Tested: Put this change in OP930, then on a system running OP940, performed
factory reset, then downgraded to the modified OP930 level and verified the
new code ran and the system booted. Without this change, this downgrade scenario fails.

Defect: https://w3.rchland.ibm.com/projects/bestquest/?defect=SW478084

Change-Id: Idde33213cb0a6bac0b4468e22b3b4fa424508267
Signed-off-by: Adriana Kobylak anoo@us.ibm.com

@anoo1
preinit-mounts: Add check for overlay file errors
74a7e68 
During a downgrade, errors from the overlay files have been seen.
Try to recreate the overlay when this happens by re-copying the
files into /etc.

Change-Id: Idde33213cb0a6bac0b4468e22b3b4fa424508267
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
@rfrandse rfrandse merged commit b104b98 into ibm-openbmc:OP940 Oct 23, 2019
rfrandse added a commit that referenced this pull request Nov 30, 2021
@rfrandse
pldm: downstream srcrev bump 9185162d36..fbbb85e405
4fd000c 
Change-Id: Iab6db3be060adead4c56f029fadfdffcccb606cd

pldm: downstream srcrev bump 89fec48cb6..e42cfe7f3b

Change-Id: Ib3f620c09af5a6774b443f2dfaff45965aa54370

pldm: downstream srcrev bump e42cfe7f3b..a7e9a9b8f2

Change-Id: I9a02b382b1756b87f5dc7b4943dbc2792a61a746

pldm: downstream srcrev bump a7e9a9b8f2..2f0a766065

Change-Id: I7e5447999917dedfad0c313eeca40562191cd6b9

pldm: downstream srcrev bump 2f0a766065..e7739b2ccc

Pavithra Barithaya (2):
      PLDM:OEM: Handling the setNumericEffecterValue command
      pldm:oem: SBE set the state effecter after dump creation is complete.

Change-Id: I7bf499eaabdabbd0ac4545a8b0c89c4d197b7961

pldm: downstream srcrev bump e7739b2ccc..0c3181a07c

Manojkiran Eda (1):
      PLDM Support for MEX FRU & MEX PDR

Zach Clark (1):
      Remove hb_power_limit_enable_current and hb_power_limit_in_watts_current

Change-Id: I1939b005f5bd9befa4641a14546ca7dc2fd104c0

pldm: downstream srcrev bump 0c3181a07c..442db2e9b7

Zach Clark (1):
      Define the hb_inhibit_bmc_reset BIOS attribute

Change-Id: I6387dd1e6b860e19f62698355b8b74c91eb01885

pldm: downstream srcrev bump 442db2e9b7..b5c70f7050

Sagar Srinivas (1):
  Fixes for the PLDM crash during RR

Change-Id: I4f5961a4098516382ac08f2f6371fe3d47351618

pldm: downstream srcrev bump b5c70f7050..0bf066c342

Manojkiran Eda (1):
  Fix crashes and potential crashes

Change-Id: If06ec2d21338db5c5d0d4d77d6cf5bfba6b68979

1020-ghe: pldm: downstream srcrev bump 0bf066c342..3dbc8fd9a3..36e4fa67f5..d2a718fee2 (#1574)

* pldm: downstream srcrev bump 0bf066c342..3dbc8fd9a3

Eddie James (1):
  Rename IBM OEM state set header and install it

Jayashankar Padath (1):
  oem: Fix to remove extra system dump (#55)

Sagar Srinivas (1):
  PLDM: Fix wrong instance number for reboot effecter

Christian Geddes (1):
  Increment max size of hb_lid_ids from 512->1024

Change-Id: I217ba7cc01d8c0a3a6748b1da5bbba15f0537db1

* pldm: downstream srcrev bump 3dbc8fd9a3..36e4fa67f5

Adriana Kobylak (1):
  Increment max size of hb_lid_ids from 512->1024 (#54)

Change-Id: I4cf6f8a2b8279342766c3903553862517235d6d0

* pldm: downstream srcrev bump 36e4fa67f5..d2a718fee2

sagisin (1):
  Fix for missing file change in PLDM bump (#57)

Change-Id: I5f984d786bae9790cfbc00500a65ba591690a685

pldm: downstream srcrev bump d2a718fee2..01a50d2421 (#1578)

Reed Frandsen (2):
  Merge pull request #58 from sagisin/pldm_nextBootSide_bootSideBiosAttr_changes
  Merge pull request #59 from sagisin/pldm_InbandCU_RenameEvent_bootSideEffectrRemoval

Sagar Srinivas (4):
  oem-ibm: support concurrent FW update
  oem-ibm: Maintain bootside Mapping and Set bios attribute
  oem-ibm: State effecter for rename operation
  oem-ibm: Eliminate the Boot side Effecters and sensors

Change-Id: Ifd3a764e76d34de8a853604731b2842e7217027f

pldm: downstream srcrev bump 01a50d2421..ef220dd56a (#1585)

Pavithrab7 (1):
  PLDM: Setting the slot power state to Off (#62)

Varsha Kaverappa (1):
  Fix for SW539617 (#63)

Change-Id: I654c034207628a009e67cac360b2e383f13d01b1

pldm: downstream srcrev bump ef220dd56a..29e741834b (#1588)

sagisin (1):
  Update pldm-softpoweroff application with working values (#64)

Change-Id: Id05dd8ad62276b6e64173eaaa5ac4a844f0368cf

pldm: downstream srcrev bump 29e741834b..90c3f46a80 (#1593)

Reed Frandsen (1):
  Merge pull request #65 from sagisin/pldm_numericEffecter_biosTracRemv_TPMEnable

Sagar Srinivas (2):
  Fix for "Unknown PLDM Entity Type in Numeric Effecter PDR"
  pldm: Remove setBIOSTable debug trace

Manojkiran Eda (1):
  oem_ibm: Tie hb_tpm_required to TPMEnable dbus property

Change-Id: I5560df98907dbed0863ad50e9ef993ccd85890c2

pldm: downstream srcrev bump 90c3f46a80..fbbb85e405 (#1597)

Jayashankar Padath (1):
  oem: refine support for VINI record (#66)

Pavithrab7 (1):
  PLDM: Panel hotplug support (#67)

George Liu (3):
  host-bmc: Fix D-Bus property signal of sendStateSensorEvent method
  utils: Add split method
  host-bmc: Split processing for string type

Manojkiran Eda (1):
  Add multi MEX Support

Reed Frandsen (1):
  Merge pull request #68 from manojkiraneda/muti-mex

Change-Id: I1ec4f8bb398b8970f5a011e9865e51bd42868abf
anoo1 added a commit to anoo1/openbmc-1 that referenced this pull request Jun 3, 2022
@anoo1
phosphor-dbus-interfaces: downstream srcrev bump be2ab647be..4f90ab52c5
0c2190b 
sagisin (1):
  Add additional variant types for Notify D-Bus method (ibm-openbmc#59)

Sheldon Bailey (1):
  Add safe mode to user interface (ibm-openbmc#58)

Change-Id: Ie9cef6ae2353fb582b1fdebe145aca203a6f0358
anoo1 added a commit to anoo1/openbmc-1 that referenced this pull request Jun 3, 2022
@anoo1
phosphor-debug-collector: downstream srcrev bump 4e846a237a..89e8ca71aa
27e6f67 
MARRI DEVENDER RAO (1):
  Check for core files and create core dump during startup of dump service (ibm-openbmc#59)

Dhruvaraj S (1):
  Time elapsed should be in micro seconds (ibm-openbmc#58)

Change-Id: Ib33e73853284f2b93207edde30fdab197bd0c9e8
rfrandse added a commit to rfrandse/openbmc-1 that referenced this pull request Jul 18, 2022
@rfrandse
phosphor-dbus-interfaces: downstream srcrev bump 2078feb194..4f90ab52c5
bf9461a 
sagisin (1):
  Add additional variant types for Notify D-Bus method (ibm-openbmc#59)

Change-Id: I0c14aff0199364d7f62d6160b07f72da4d77f079
rfrandse added a commit to rfrandse/openbmc-1 that referenced this pull request Jul 18, 2022
@rfrandse
1020-ghe: pldm: downstream srcrev bump f55dd18320..26503b6bc0 (#2487)
b41b51b 
* phosphor-dbus-interfaces: downstream srcrev bump be2ab647be..2078feb194

Sheldon Bailey (1):
  Add safe mode to user interface (ibm-openbmc#58)

Change-Id: I5d79444d7037f2b18d422bbcd81a0ebdf0b804f4

* pldm: downstream srcrev bump c136123745..f55dd18320

sagisin (1):
  PLDM: FCO and DIMM D-bus Objects persistency (ibm-openbmc#257)

Change-Id: I12b00d816204a3c91d79cce3c03ca2a514642d29

* phosphor-inventory-manager: downstream srcrev bump 1678836246..2e6d0622e6

sagisin (1):
  Add additional variant types to InterfaceVariantType (ibm-openbmc#11)

Change-Id: I1ea3b91477222396106cdd6222f60851867c57b4

* phosphor-dbus-interfaces: downstream srcrev bump 2078feb194..4f90ab52c5

sagisin (1):
  Add additional variant types for Notify D-Bus method (ibm-openbmc#59)

Change-Id: I0c14aff0199364d7f62d6160b07f72da4d77f079

* pldm: downstream srcrev bump f55dd18320..26503b6bc0

Pavithra B (1):
  fixes MEX CM and looping issue in MEX systems (ibm-openbmc#261)

Change-Id: I51de7e2426f6afc9ea18aa2b7d4ccf0bc26fb95e
rfrandse added a commit to rfrandse/openbmc-1 that referenced this pull request Jul 18, 2022
@rfrandse
phosphor-debug-collector: downstream srcrev bump 486f64ea7b..89e8ca71…
b39b05e 
…aa (#2507)

MARRI DEVENDER RAO (1):
  Check for core files and create core dump during startup of dump service (ibm-openbmc#59)

Change-Id: I749593124069a4324cffa6c59ca28f4ea39eb333
rfrandse added a commit to rfrandse/openbmc-1 that referenced this pull request Jul 18, 2022
@rfrandse
phosphor-dbus-interfaces: downstream srcrev bump 2078feb194..4f90ab52c5
ca8cafd 
sagisin (1):
  Add additional variant types for Notify D-Bus method (ibm-openbmc#59)

Change-Id: I0c14aff0199364d7f62d6160b07f72da4d77f079
rfrandse added a commit to rfrandse/openbmc-1 that referenced this pull request Jul 18, 2022
@rfrandse
1020-ghe: pldm: downstream srcrev bump f55dd18320..26503b6bc0 (#2487)
b8a5be8 
* phosphor-dbus-interfaces: downstream srcrev bump be2ab647be..2078feb194

Sheldon Bailey (1):
  Add safe mode to user interface (ibm-openbmc#58)

Change-Id: I5d79444d7037f2b18d422bbcd81a0ebdf0b804f4

* pldm: downstream srcrev bump c136123745..f55dd18320

sagisin (1):
  PLDM: FCO and DIMM D-bus Objects persistency (ibm-openbmc#257)

Change-Id: I12b00d816204a3c91d79cce3c03ca2a514642d29

* phosphor-inventory-manager: downstream srcrev bump 1678836246..2e6d0622e6

sagisin (1):
  Add additional variant types to InterfaceVariantType (ibm-openbmc#11)

Change-Id: I1ea3b91477222396106cdd6222f60851867c57b4

* phosphor-dbus-interfaces: downstream srcrev bump 2078feb194..4f90ab52c5

sagisin (1):
  Add additional variant types for Notify D-Bus method (ibm-openbmc#59)

Change-Id: I0c14aff0199364d7f62d6160b07f72da4d77f079

* pldm: downstream srcrev bump f55dd18320..26503b6bc0

Pavithra B (1):
  fixes MEX CM and looping issue in MEX systems (ibm-openbmc#261)

Change-Id: I51de7e2426f6afc9ea18aa2b7d4ccf0bc26fb95e
rfrandse added a commit to rfrandse/openbmc-1 that referenced this pull request Jul 18, 2022
@rfrandse
phosphor-debug-collector: downstream srcrev bump 486f64ea7b..89e8ca71…
33afd7d 
…aa (#2507)

MARRI DEVENDER RAO (1):
  Check for core files and create core dump during startup of dump service (ibm-openbmc#59)

Change-Id: I749593124069a4324cffa6c59ca28f4ea39eb333
rfrandse added a commit that referenced this pull request Jul 18, 2022
@rfrandse
phosphor-dbus-interfaces: downstream srcrev bump 2078feb194..4f90ab52c5
2b6be80 
sagisin (1):
  Add additional variant types for Notify D-Bus method (#59)

Change-Id: I0c14aff0199364d7f62d6160b07f72da4d77f079
rfrandse added a commit that referenced this pull request Jul 18, 2022
@rfrandse
1020-ghe: pldm: downstream srcrev bump f55dd18320..26503b6bc0 (#2487)
9bcb821 
* phosphor-dbus-interfaces: downstream srcrev bump be2ab647be..2078feb194

Sheldon Bailey (1):
  Add safe mode to user interface (#58)

Change-Id: I5d79444d7037f2b18d422bbcd81a0ebdf0b804f4

* pldm: downstream srcrev bump c136123745..f55dd18320

sagisin (1):
  PLDM: FCO and DIMM D-bus Objects persistency (#257)

Change-Id: I12b00d816204a3c91d79cce3c03ca2a514642d29

* phosphor-inventory-manager: downstream srcrev bump 1678836246..2e6d0622e6

sagisin (1):
  Add additional variant types to InterfaceVariantType (#11)

Change-Id: I1ea3b91477222396106cdd6222f60851867c57b4

* phosphor-dbus-interfaces: downstream srcrev bump 2078feb194..4f90ab52c5

sagisin (1):
  Add additional variant types for Notify D-Bus method (#59)

Change-Id: I0c14aff0199364d7f62d6160b07f72da4d77f079

* pldm: downstream srcrev bump f55dd18320..26503b6bc0

Pavithra B (1):
  fixes MEX CM and looping issue in MEX systems (#261)

Change-Id: I51de7e2426f6afc9ea18aa2b7d4ccf0bc26fb95e
rfrandse added a commit that referenced this pull request Jul 18, 2022
@rfrandse
phosphor-debug-collector: downstream srcrev bump 486f64ea7b..89e8ca71…
cc6dba2 
…aa (#2507)

MARRI DEVENDER RAO (1):
  Check for core files and create core dump during startup of dump service (#59)

Change-Id: I749593124069a4324cffa6c59ca28f4ea39eb333
rfrandse added a commit that referenced this pull request Oct 26, 2022
@rfrandse
phosphor-dbus-interfaces: downstream srcrev bump 2078feb194..4f90ab52c5
1874504 
sagisin (1):
  Add additional variant types for Notify D-Bus method (#59)

Change-Id: I0c14aff0199364d7f62d6160b07f72da4d77f079
rfrandse added a commit that referenced this pull request Oct 26, 2022
@rfrandse
1020-ghe: pldm: downstream srcrev bump f55dd18320..26503b6bc0 (#2487)
9623bc2 
* phosphor-dbus-interfaces: downstream srcrev bump be2ab647be..2078feb194

Sheldon Bailey (1):
  Add safe mode to user interface (#58)

Change-Id: I5d79444d7037f2b18d422bbcd81a0ebdf0b804f4

* pldm: downstream srcrev bump c136123745..f55dd18320

sagisin (1):
  PLDM: FCO and DIMM D-bus Objects persistency (#257)

Change-Id: I12b00d816204a3c91d79cce3c03ca2a514642d29

* phosphor-inventory-manager: downstream srcrev bump 1678836246..2e6d0622e6

sagisin (1):
  Add additional variant types to InterfaceVariantType (#11)

Change-Id: I1ea3b91477222396106cdd6222f60851867c57b4

* phosphor-dbus-interfaces: downstream srcrev bump 2078feb194..4f90ab52c5

sagisin (1):
  Add additional variant types for Notify D-Bus method (#59)

Change-Id: I0c14aff0199364d7f62d6160b07f72da4d77f079

* pldm: downstream srcrev bump f55dd18320..26503b6bc0

Pavithra B (1):
  fixes MEX CM and looping issue in MEX systems (#261)

Change-Id: I51de7e2426f6afc9ea18aa2b7d4ccf0bc26fb95e
rfrandse added a commit that referenced this pull request Oct 26, 2022
@rfrandse
phosphor-debug-collector: downstream srcrev bump 486f64ea7b..89e8ca71…
f5f922b 
…aa (#2507)

MARRI DEVENDER RAO (1):
  Check for core files and create core dump during startup of dump service (#59)

Change-Id: I749593124069a4324cffa6c59ca28f4ea39eb333
rfrandse added a commit that referenced this pull request Nov 17, 2022
@rfrandse
webui-vue: downstream srcrev bump 53fd823b17..9f12edba30
b8de313 
Gunnar Mills (1):
  Revert "Refresh only once after login (#42)" (#59)

Change-Id: If4356d3e7a6ba72d2287f40b487829efc149f477
rfrandse added a commit that referenced this pull request Jan 3, 2023
@rfrandse
webui-vue: downstream srcrev bump ed7278a2f7..203a27a3dc
aac089d 
Sandeepa Singh (47):
  Firmware-change (#66)
  Allow only tar file upload (#71)
  Hardware Deconfiguration Page (#84)
  Deconfig-Toggles (#110)
  Filter SNMP data (#112)
  Upload acf certificate on login page (#126)
  Hardware deconfiguration fix (#128)
  TFTP firmware update (#104)
  Add filter to remove absent dimms form GUI (#139)
  Add abiliy to sort hardware deconfig columns (#162)
  Add helptext for FQDN (#164)
  Add deconfiguration type as None (#163)
  Fix link to deconfiguration records (#155)
  Remove regex from firmware (#151)
  Add alert for HMC connection disconnect (#152)
  Update hardware deconfiguration per Demo feedback (#180)
  Remove Default option from Server power operations page (#188)
  reverting removal of Default partition environment dropdown (#190)
  Add Lateral cast out page (#177)
  fix toggle issue (#191)
  Add details on login page (#193)
  Remove TFTP server option from firmware page (#194)
  Real time post codes converted to ASCII (#207)
  fix TFTP bug (#213)
  Show/Hide ACF upload button (#214)
  Fix toggle issue (#219)
  Change the toggle text to configure/deconfigure (#223)
  Fix the sorting issue in progress logs (#240)
  Translate severity to fatal,predictive and manual (#235)
  Add Pel ID column on HW deconfiguration page (#244)
  Show FW_boot_side_current attribute value (#262)
  Added filter to remove 00000000 from post code table (#272)
  Fix toast msg for HW deconfiguration page (#251)
  Add location code of Deconfig records page (#293)
  Make memory page consistent (#308)
  Add pel id column (#332)
  Update service login condition (#326)
  Edit app nav and login file (#335)
  Update Automatic helptext (#340)
  Grey out toggle when DHCP is disabled (#338)
  Disable delete when system is powered on (#327)
  Renamed added optimization page (#346)
  Fix deconfiguration record translation bug (#360)
  Fix power page translation bug (#361)
  Operating mode is translatable now (#363)
  Fix user management page translation bugs (#365)
  Fix server power ops translation bugs (#359)

Kenneth Fullbright (85):
  Removed irrelevant fields from the VET Capabilities table (#68)
  Update Firmware page interactions when system is powered on (#51)
  Updated CSR Modal & Service login Certificate Modal (#59)
  Removed OemIBMServiceAgent from  Group Privilege list (#76)
  Updated Power saver modes descriptions (#83)
  Popup SOL Console (Host Console) not showing correct connection status (#79)
  Removed irrelevant fields from the VET Capabilities table (#93)
  Added Initiate Resource Dump Function (#103)
  Fixed password change/reset code for expired password (#125)
  Fixed global action vuex error getUsers (#120)
  Fixed 'Promise.all' related errors on Overview (#119)
  Renamed "Serial over LAN (SOL) console" page (#54)
  Fixed event log table to be fully responsive (#122)
  Prevent service user password change (#88)
  Turned dumps PHYP alert into a toast (#140)
  Repaired Service login consoles links in the navbar (#145)
  Removed LDAP from navigation on non admin role accounts (#108)
  Updated the link to consoles and other nav related items
  Refactored Power page and power page related things (#109)
  Added Power restore policy missing alert on operating mode manual (#147)
  Made non-service roles not pass default password for resource dumps (#135)
  Fixed BMC Hypervisor console switch (#159)
  Enhanced user creation and current user failed message for password change (#81)
  Fixed translation double key error (#146)
  Removed service privilege option from edit user and add user (#161)
  Enhanced resource dump error messages (#168)
  Refactored Power page code for efficiency and clarity (#158)
  Fixed init system dump from resource dump (#136)
  Added toast for invalid privilege (#172)
  Fixed Service consoles (#176)
  Fix user management delete table action (#179)
  Fixed service account resource dumps password field to allow any string (#183)
  Fixed Idle power saving missing reset button option (#184)
  Removed lower and upper limit and warning sensors (#186)
  Fixed missing fields for add user on user modal (#185)
  Fixed maximum amount of users toast error (#196)
  Fixed delete and replace function in Certificates table (#197)
  Fixed navbar missing error (#206)
  Fixed popup BMC and Hypervisor consoles. (#205)
  Fixed init system dump PHYP in standby check error (#204)
  Fixed closing console conntections. (#220)
  Fixed upload certificate button not being disabled on max certificates (#224)
  Added info tool tips on password changing fields. (#225)
  Removed operator role from add role group modal (#229) [SW550540]
  Removed Operator and NoAccess roles from desciption table (#228) [SW550558]
  Fixed proxy logout error (#226)
  Created info icon for enhanced information about power consumption (#232)
  Fixed some tables not being fully responsive (#222)
  Set autocomplete option to off for password fields (#231)
  Added dump being offloaded warning for reboot and shutdown (#241)
  Fixed system dump error messages (#238)
  Fixed factory reset to default code (#243)
  Changed OemIBMServiceAgent to ServiceAgent (#261)
  Add safe mode to user interface (#250)
  Fixed fresh install set password and login error (#263)
  Fixed DHCP delete button not disabled (#273)
  Removed unsupported ServiceAgent group from LDAP group privilege modal (#268)
  Fixed Zombie state when factory resetting (#270)
  Fixed unauthorized error toast on page loading (#267)
  Fixed firmware swapping confusion (#271)
  Fixed console connection indicators (#275)
  Fixed account polocy settings displaying not updated info on refresh (#276)
  Fixed running and backup image info render problem (#287)
  Fixed event logs not updating upon delete all button (#290)
  Fixed account policy radio buttons (#289)
  Fixed secure LDAP checkbox not showing correct values (#291)
  Fixed firmware update function (#296)
  Fixed JSON.parse error from localStorage (#298)
  Fixed factory reset function to be fully async (#306)
  Removed host console access from ReadOnly roles (#307)
  Fixed SRC Details not showing on non manual records (#300)
  Fixed page memory validation error (#313)
  Fixed location code not showing on Deconfiguration records table (#317)
  Disabled users from changing username on user management table (#321)
  Added Location codes for TPM (#324)
  Fixed console indicators not updating status (#304)
  Added Location codes for TPM (#325)
  Made more meaningful toasts (#314)
  Fixed manage access keys hyperlink being disabled problems on Firmware page (#322)
  Fixed asset tag info not showing up in modal after app refresh and tag update (#333)
  Removed hashes from files (#334)
  Created real time indicator postCodeValue filter (#302)
  Fixed Deconfig table download additional data button (#328)
  Changed page "Lateral cast out" to "Added optimization" (#341)
  Added notices page (#336)

A Nikhil (47):
  Update Inventory DIMM table (#74)
  Update Inventory Assemblies table (#87)
  Update Inventory Processors table (#86)
  Incorrect Power mode value (#89)
  Dumps available on BMC are not displayed on BMC-GUI (#72)
  Components on the hardware page not in order (#101)
  No values populated for licensed and configured cores (#91)
  Update GUI as IBM (#116)
  Rename Update Firmware access key (#117)
  Health and state field of assembly components is missing in inventory page (#99)
  Event logs add missing information (#111)
  GUI has no way to turn off System attention LED (#129)
  Event log does not show information for service (#133)
  GUI missing detailed COD (#124)
  Rename count in system table (#149)
  FCO page accepts value greater than the number of licensed cores (#142)
  Part number field is showing spare part number value (#165)
  Wrong lable on SRC for logs (#156)
  Inventory and LEDs page has two system entries (#137)
  Add toggle to enable/disable the secure version lock in (#167)
  Factory reset option should only be provided at power off (#174)
  Health in critical state after marking critical errors as resolved (#189)
  Concurrent maintenance Page (#202)
  Download implementation in Event logs (#192)
   Missing host USB enable/disable (#239)
  Prevent system power on when BMC is not in Ready state (#227)
  Adding mex chassis Info (#233)
  Mex IO enclosure firmware version not displayed (#265)
  PCIe Hardware Topology (#181)
  Warning in PcieTopology.vue (#282)
  Pcie-topology and Inventory fixes (#288)
  Unable to edit group name in the Add Role group field. (#303)
  PCIe Topology Save changes (#309)
  Invalid range for I/O Adapter enlarged capacity (#311)
  Status for both system and chassis comes as absent at host power off state (#312)
  Status for system table should be Present (#320)
  Fixed Identify LED error in MEX chassis (#330)
  Assemblies section does not has search option in Inventory page (#315)
  PCIe link width for empty slots is showing as -1 (#319)
  Warning message only in manual mode (#323)
  Fixed incorrect Identity LEDs error message (#331)
  Unwanted fields for MEX components removed (#329)
  PCIe topology performance improved (#337)
  AIX/LINUX and IBM i partition are only for non-HMC manage system (#318)
  Severity values is now translatable (#357)
  Enabled value taken from translation file (#362)
  Removed .tar.xz extension from dumps (#410)

whitesource-ets[bot] (1):
  Add .whitesource configuration file

sandeepasingh116 (17):
  Add new toggles on CM page (#3)
  Changed connection status logic for Hypervisor console (#6)
  Remove dump download option from overview page (#9)
  Add text on user management page (#8)
  Rename the save setting button (#20)
  Add success toast (#18)
  Fix network eth1 error (#21)
  Disable date and time page (#24)
  Update password helptext (#19)
  Add info tooltip to frequency cap (#25)
  Read only user will not be able to toggle switches (#28)
  Make filters translatable (#33)
  Fix translations of vet capabilities (#35)
  fix english texts containing links (#38)
  Remove service login label for read only user (#45)
  fix translation defect for server power ops (#52)
  add toogle on Policies page (#73)

Reed Frandsen (1):
  Removed alert message from Update firmware component (#90)

Gunnar Mills (3):
  Enable hmc proxy (#208)
  Update notices to 1030 (#50)
  Revert "Refresh only once after login (#42)" (#59)

Nikhil Ashoka (33):
  pdated the text of server power ops documentation (#7)
  Displaying Sensors table one row at a time (#11)
  NTP server duplicate entry is not accepted (#4)
  Fabric Adapters Info in Inventory page (#12)
  Fixed Secure LDAP using SSL checkbox value (#2)
  Added progress bar for activate access key (#1)
  Error message displayed if fails to authenticate the user (#10)
  Memory page made HMC-managed independent (#15)
  Sorting fixed for status (#17)
  Sensors table now updating on refresh (#22)
  Secure LDAP is disabled when LDAP authentication disables (#23)
  Removed Service consoles page for read-only users (#14)
  Additional message added on Disable SSH (#30)
  Default partition value taken from translation file (#36)
  Updated password Max Limit (#26)
  New Error message displayed if fails to authenticate the user (#27)
  Added Status and roles values to the translation file (#31)
  Title translation (#34)
  Power values added to translation file (#32)
  Health and Date format taken from translation file (#37)
  Added possible property values in translation file (#39)
  Displaying System Anchor value (#40)
  Added Info tooltip to VirtualTPM (#47)
  Added max limit based on selected user (#46)
  Refresh only once after login (#42)
  Lamp test switch disabled once ON (#48)
  Tab names translated in Inventory page (#54)
  Using privilege values from the translation file (#56)
  Deconfiguration type is taken from translation file (#57)
  Fabric Adapter table showing Name (#55)
  PCIe topology overlapping fix (#53)
  Added Identity LED to Fabric Adapters (#49)
  Removed Error message from Accounts verification (#44)

Dixsie Wolmers (14):
  Fix network settings defects - FQDN, link info, and MAC address (#113)
  Audit translation file (#115)
  Network settings - update DHCP section (#114)
  Add deconfiguration logs page (#121)
  Fix host console route (#157)
  Fix language dropdown on login page (#166)
  Network settings fixes - dhcp modal, edit ipv4, default gateway (#175)
  Update deconfig log table (#200)
  Update  network settings ipv4 table (#199)
  Fix network settings hostname and IUM errors (#210)
  Add  ability to edit asset tag (#211)
  Fix LDAP form values when LDAP disabled - SW546990 (#245)
  Fix deconfig records defects (#246)
  Update maintainers - Remove Dixsie and add Sandeepa (#286)

aixt9n aixt9n (2):
  i18n: KO_KR: Drop latest translated files for webui-vue (#257)
  i18n: ES_ES: Drop latest translated files for webui-vue (#258)

Change-Id: Ib5cb6cfccace5b718d22173ff1df4e8ce2a1e05c
rfrandse pushed a commit that referenced this pull request Feb 13, 2023
@geissonator @rfrandse
phosphor-dbus-interfaces: c3dd366..d2d2be
04ad093 
Ben Tyner (1):
      Power mode state lock support (#61)

Dhruvaraj Subhashchandran (2):
      Add SBE dump type to dump create parameters
      Add Self Boot Engine(SBE) dump interface

Sunny Srivastava (1):
      IBM: Api to collect single FRU VPD

sagisin (1):
      Add additional variant types for Notify D-Bus method (#59)

Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
rfrandse added a commit that referenced this pull request Feb 13, 2023
@rfrandse
phosphor-networkd: downstream srcrev bump 85dc57a57c..1337f4bb06 (#3203)
1e742b9 
Asmitha Karunanithi (2):
  Hypervisor network configuration support (#57)
  Fix compilation issues - hypervisor network configuration (#59)

Change-Id: I94d423da48a2fda51344f6302e63e0b2cd8b64dd
rfrandse added a commit that referenced this pull request Mar 3, 2023
@rfrandse
webui-vue: downstream srcrev bump 53fd823b17..9f12edba30
19c8be7 
Gunnar Mills (1):
  Revert "Refresh only once after login (#42)" (#59)

Change-Id: If4356d3e7a6ba72d2287f40b487829efc149f477
rfrandse added a commit that referenced this pull request Mar 3, 2023
@rfrandse
webui-vue: downstream srcrev bump db2b7c0dcf..59e56467b8
8ccc811 
sandeepasingh116 (4):
  fix translation defect for server power ops (#52)
  add toogle on Policies page (#73)
  Fix login page logo issue (#81)
  Fix logo issue (#82)

George Liu (9):
  ips-localization: Change the width property size (#41)
  Support css style for IPS (#51)
  Update the style of resetButton (#61)
  Fix Chinese line break problem (#62)
  Add timeout mechanism when setting Server power policy (#68)
  Notices: changed from IBM to IPS (#69)
  Fix reset password error prompt password error (#60)
  Filter redundant licenses entry (#70)
  Fix server firmware start policy (#77)

Gunnar Mills (1):
  Revert "Refresh only once after login (#42)" (#59)

Nikhil Ashoka (10):
  Tab names translated in Inventory page (#54)
  Using privilege values from the translation file (#56)
  Deconfiguration type is taken from translation file (#57)
  Fabric Adapter table showing Name (#55)
  PCIe topology overlapping fix (#53)
  Added Identity LED to Fabric Adapters (#49)
  Removed Error message from Accounts verification (#44)
  Labels now updating in Concurrent maintenance page (#63)
  Refresh only once and title translation (#65)
  New helptext for Capacity on demand activation (#43)

A Nikhil (1):
  Removed .tar.xz extension from dumps (#410)

Change-Id: Ifbbd773a99fdd13b785976bd680f59fe50f59ff5
rfrandse added a commit that referenced this pull request Mar 28, 2024
@rfrandse
webui-vue: downstream srcrev bump ed7278a2f7..203a27a3dc
11a315e 
Sandeepa Singh (47):
  Firmware-change (#66)
  Allow only tar file upload (#71)
  Hardware Deconfiguration Page (#84)
  Deconfig-Toggles (#110)
  Filter SNMP data (#112)
  Upload acf certificate on login page (#126)
  Hardware deconfiguration fix (#128)
  TFTP firmware update (#104)
  Add filter to remove absent dimms form GUI (#139)
  Add abiliy to sort hardware deconfig columns (#162)
  Add helptext for FQDN (#164)
  Add deconfiguration type as None (#163)
  Fix link to deconfiguration records (#155)
  Remove regex from firmware (#151)
  Add alert for HMC connection disconnect (#152)
  Update hardware deconfiguration per Demo feedback (#180)
  Remove Default option from Server power operations page (#188)
  reverting removal of Default partition environment dropdown (#190)
  Add Lateral cast out page (#177)
  fix toggle issue (#191)
  Add details on login page (#193)
  Remove TFTP server option from firmware page (#194)
  Real time post codes converted to ASCII (#207)
  fix TFTP bug (#213)
  Show/Hide ACF upload button (#214)
  Fix toggle issue (#219)
  Change the toggle text to configure/deconfigure (#223)
  Fix the sorting issue in progress logs (#240)
  Translate severity to fatal,predictive and manual (#235)
  Add Pel ID column on HW deconfiguration page (#244)
  Show FW_boot_side_current attribute value (#262)
  Added filter to remove 00000000 from post code table (#272)
  Fix toast msg for HW deconfiguration page (#251)
  Add location code of Deconfig records page (#293)
  Make memory page consistent (#308)
  Add pel id column (#332)
  Update service login condition (#326)
  Edit app nav and login file (#335)
  Update Automatic helptext (#340)
  Grey out toggle when DHCP is disabled (#338)
  Disable delete when system is powered on (#327)
  Renamed added optimization page (#346)
  Fix deconfiguration record translation bug (#360)
  Fix power page translation bug (#361)
  Operating mode is translatable now (#363)
  Fix user management page translation bugs (#365)
  Fix server power ops translation bugs (#359)

Kenneth Fullbright (85):
  Removed irrelevant fields from the VET Capabilities table (#68)
  Update Firmware page interactions when system is powered on (#51)
  Updated CSR Modal & Service login Certificate Modal (#59)
  Removed OemIBMServiceAgent from  Group Privilege list (#76)
  Updated Power saver modes descriptions (#83)
  Popup SOL Console (Host Console) not showing correct connection status (#79)
  Removed irrelevant fields from the VET Capabilities table (#93)
  Added Initiate Resource Dump Function (#103)
  Fixed password change/reset code for expired password (#125)
  Fixed global action vuex error getUsers (#120)
  Fixed 'Promise.all' related errors on Overview (#119)
  Renamed "Serial over LAN (SOL) console" page (#54)
  Fixed event log table to be fully responsive (#122)
  Prevent service user password change (#88)
  Turned dumps PHYP alert into a toast (#140)
  Repaired Service login consoles links in the navbar (#145)
  Removed LDAP from navigation on non admin role accounts (#108)
  Updated the link to consoles and other nav related items
  Refactored Power page and power page related things (#109)
  Added Power restore policy missing alert on operating mode manual (#147)
  Made non-service roles not pass default password for resource dumps (#135)
  Fixed BMC Hypervisor console switch (#159)
  Enhanced user creation and current user failed message for password change (#81)
  Fixed translation double key error (#146)
  Removed service privilege option from edit user and add user (#161)
  Enhanced resource dump error messages (#168)
  Refactored Power page code for efficiency and clarity (#158)
  Fixed init system dump from resource dump (#136)
  Added toast for invalid privilege (#172)
  Fixed Service consoles (#176)
  Fix user management delete table action (#179)
  Fixed service account resource dumps password field to allow any string (#183)
  Fixed Idle power saving missing reset button option (#184)
  Removed lower and upper limit and warning sensors (#186)
  Fixed missing fields for add user on user modal (#185)
  Fixed maximum amount of users toast error (#196)
  Fixed delete and replace function in Certificates table (#197)
  Fixed navbar missing error (#206)
  Fixed popup BMC and Hypervisor consoles. (#205)
  Fixed init system dump PHYP in standby check error (#204)
  Fixed closing console conntections. (#220)
  Fixed upload certificate button not being disabled on max certificates (#224)
  Added info tool tips on password changing fields. (#225)
  Removed operator role from add role group modal (#229) [SW550540]
  Removed Operator and NoAccess roles from desciption table (#228) [SW550558]
  Fixed proxy logout error (#226)
  Created info icon for enhanced information about power consumption (#232)
  Fixed some tables not being fully responsive (#222)
  Set autocomplete option to off for password fields (#231)
  Added dump being offloaded warning for reboot and shutdown (#241)
  Fixed system dump error messages (#238)
  Fixed factory reset to default code (#243)
  Changed OemIBMServiceAgent to ServiceAgent (#261)
  Add safe mode to user interface (#250)
  Fixed fresh install set password and login error (#263)
  Fixed DHCP delete button not disabled (#273)
  Removed unsupported ServiceAgent group from LDAP group privilege modal (#268)
  Fixed Zombie state when factory resetting (#270)
  Fixed unauthorized error toast on page loading (#267)
  Fixed firmware swapping confusion (#271)
  Fixed console connection indicators (#275)
  Fixed account polocy settings displaying not updated info on refresh (#276)
  Fixed running and backup image info render problem (#287)
  Fixed event logs not updating upon delete all button (#290)
  Fixed account policy radio buttons (#289)
  Fixed secure LDAP checkbox not showing correct values (#291)
  Fixed firmware update function (#296)
  Fixed JSON.parse error from localStorage (#298)
  Fixed factory reset function to be fully async (#306)
  Removed host console access from ReadOnly roles (#307)
  Fixed SRC Details not showing on non manual records (#300)
  Fixed page memory validation error (#313)
  Fixed location code not showing on Deconfiguration records table (#317)
  Disabled users from changing username on user management table (#321)
  Added Location codes for TPM (#324)
  Fixed console indicators not updating status (#304)
  Added Location codes for TPM (#325)
  Made more meaningful toasts (#314)
  Fixed manage access keys hyperlink being disabled problems on Firmware page (#322)
  Fixed asset tag info not showing up in modal after app refresh and tag update (#333)
  Removed hashes from files (#334)
  Created real time indicator postCodeValue filter (#302)
  Fixed Deconfig table download additional data button (#328)
  Changed page "Lateral cast out" to "Added optimization" (#341)
  Added notices page (#336)

A Nikhil (47):
  Update Inventory DIMM table (#74)
  Update Inventory Assemblies table (#87)
  Update Inventory Processors table (#86)
  Incorrect Power mode value (#89)
  Dumps available on BMC are not displayed on BMC-GUI (#72)
  Components on the hardware page not in order (#101)
  No values populated for licensed and configured cores (#91)
  Update GUI as IBM (#116)
  Rename Update Firmware access key (#117)
  Health and state field of assembly components is missing in inventory page (#99)
  Event logs add missing information (#111)
  GUI has no way to turn off System attention LED (#129)
  Event log does not show information for service (#133)
  GUI missing detailed COD (#124)
  Rename count in system table (#149)
  FCO page accepts value greater than the number of licensed cores (#142)
  Part number field is showing spare part number value (#165)
  Wrong lable on SRC for logs (#156)
  Inventory and LEDs page has two system entries (#137)
  Add toggle to enable/disable the secure version lock in (#167)
  Factory reset option should only be provided at power off (#174)
  Health in critical state after marking critical errors as resolved (#189)
  Concurrent maintenance Page (#202)
  Download implementation in Event logs (#192)
   Missing host USB enable/disable (#239)
  Prevent system power on when BMC is not in Ready state (#227)
  Adding mex chassis Info (#233)
  Mex IO enclosure firmware version not displayed (#265)
  PCIe Hardware Topology (#181)
  Warning in PcieTopology.vue (#282)
  Pcie-topology and Inventory fixes (#288)
  Unable to edit group name in the Add Role group field. (#303)
  PCIe Topology Save changes (#309)
  Invalid range for I/O Adapter enlarged capacity (#311)
  Status for both system and chassis comes as absent at host power off state (#312)
  Status for system table should be Present (#320)
  Fixed Identify LED error in MEX chassis (#330)
  Assemblies section does not has search option in Inventory page (#315)
  PCIe link width for empty slots is showing as -1 (#319)
  Warning message only in manual mode (#323)
  Fixed incorrect Identity LEDs error message (#331)
  Unwanted fields for MEX components removed (#329)
  PCIe topology performance improved (#337)
  AIX/LINUX and IBM i partition are only for non-HMC manage system (#318)
  Severity values is now translatable (#357)
  Enabled value taken from translation file (#362)
  Removed .tar.xz extension from dumps (#410)

whitesource-ets[bot] (1):
  Add .whitesource configuration file

sandeepasingh116 (17):
  Add new toggles on CM page (#3)
  Changed connection status logic for Hypervisor console (#6)
  Remove dump download option from overview page (#9)
  Add text on user management page (#8)
  Rename the save setting button (#20)
  Add success toast (#18)
  Fix network eth1 error (#21)
  Disable date and time page (#24)
  Update password helptext (#19)
  Add info tooltip to frequency cap (#25)
  Read only user will not be able to toggle switches (#28)
  Make filters translatable (#33)
  Fix translations of vet capabilities (#35)
  fix english texts containing links (#38)
  Remove service login label for read only user (#45)
  fix translation defect for server power ops (#52)
  add toogle on Policies page (#73)

Reed Frandsen (1):
  Removed alert message from Update firmware component (#90)

Gunnar Mills (3):
  Enable hmc proxy (#208)
  Update notices to 1030 (#50)
  Revert "Refresh only once after login (#42)" (#59)

Nikhil Ashoka (33):
  pdated the text of server power ops documentation (#7)
  Displaying Sensors table one row at a time (#11)
  NTP server duplicate entry is not accepted (#4)
  Fabric Adapters Info in Inventory page (#12)
  Fixed Secure LDAP using SSL checkbox value (#2)
  Added progress bar for activate access key (#1)
  Error message displayed if fails to authenticate the user (#10)
  Memory page made HMC-managed independent (#15)
  Sorting fixed for status (#17)
  Sensors table now updating on refresh (#22)
  Secure LDAP is disabled when LDAP authentication disables (#23)
  Removed Service consoles page for read-only users (#14)
  Additional message added on Disable SSH (#30)
  Default partition value taken from translation file (#36)
  Updated password Max Limit (#26)
  New Error message displayed if fails to authenticate the user (#27)
  Added Status and roles values to the translation file (#31)
  Title translation (#34)
  Power values added to translation file (#32)
  Health and Date format taken from translation file (#37)
  Added possible property values in translation file (#39)
  Displaying System Anchor value (#40)
  Added Info tooltip to VirtualTPM (#47)
  Added max limit based on selected user (#46)
  Refresh only once after login (#42)
  Lamp test switch disabled once ON (#48)
  Tab names translated in Inventory page (#54)
  Using privilege values from the translation file (#56)
  Deconfiguration type is taken from translation file (#57)
  Fabric Adapter table showing Name (#55)
  PCIe topology overlapping fix (#53)
  Added Identity LED to Fabric Adapters (#49)
  Removed Error message from Accounts verification (#44)

Dixsie Wolmers (14):
  Fix network settings defects - FQDN, link info, and MAC address (#113)
  Audit translation file (#115)
  Network settings - update DHCP section (#114)
  Add deconfiguration logs page (#121)
  Fix host console route (#157)
  Fix language dropdown on login page (#166)
  Network settings fixes - dhcp modal, edit ipv4, default gateway (#175)
  Update deconfig log table (#200)
  Update  network settings ipv4 table (#199)
  Fix network settings hostname and IUM errors (#210)
  Add  ability to edit asset tag (#211)
  Fix LDAP form values when LDAP disabled - SW546990 (#245)
  Fix deconfig records defects (#246)
  Update maintainers - Remove Dixsie and add Sandeepa (#286)

aixt9n aixt9n (2):
  i18n: KO_KR: Drop latest translated files for webui-vue (#257)
  i18n: ES_ES: Drop latest translated files for webui-vue (#258)

Change-Id: Ib5cb6cfccace5b718d22173ff1df4e8ce2a1e05c
rfrandse added a commit that referenced this pull request Mar 28, 2024
@rfrandse
phosphor-networkd: 1050 downstream srcrev bump
fbae621 
Asmitha Karunanithi (2):
  Hypervisor network configuration support (#57)
  Fix compilation issues - hypervisor network configuration (#59)

Change-Id: I94d423da48a2fda51344f6302e63e0b2cd8b64dd
rfrandse added a commit that referenced this pull request Mar 28, 2024
@rfrandse
phosphor-debug-collector: downstream srcrev bump d53cb47ccd..b6fe1d5c…
8818368 
…b4 (#3871)

MARRI DEVENDER RAO (1):
  create core dump if core files exit during startup (#59) (#116)

Change-Id: Ifd7be12008bc2499b4e8b0869f63ffe478a38e3f
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers

@geissonator geissonator geissonator approved these changes

Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.

None yet
3 participants
@anoo1 @geissonator @rfrandse