new watch not charging (?)

[GoogleCodeExporter]

What steps will reproduce the problem?

What is the expected output? What do you see instead?
new watch doesn't charge.

What version of the product are you using? On what operating system?

Running mint linux. 

uname -a

Linux paul-EX58-DS4 3.8.0-26-generic #38-Ubuntu SMP Mon Jun 17 21:46:08 UTC 
2013 i686 i686 i686 GNU/Linux

Please provide any additional information below.

dmesg

[37779.696974] usb 8-2: new full-speed USB device number 10 using uhci_hcd
[37779.896914] usb 8-2: New USB device found, idVendor=0403, idProduct=8b30
[37779.896920] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[37779.896923] usb 8-2: Product: Swimovate Pod
[37779.896926] usb 8-2: Manufacturer: Swimovate Ltd
[37779.896929] usb 8-2: SerialNumber: XXXXXXXXXXXXX


I get malformed packet whilst watching the usb handshake and communications 
with wire shark.

here is the .csv file output from wire shark (i would assume, this is the 
problem?)

"No.","Time","Source","Destination","Protocol","Length","Info"
"40","21:35:40.257644000","0.0","host","USB","72","GET DESCRIPTOR Response 
DEVICE"
"52","21:35:40.399714000","10.0","host","USB","64","GET DESCRIPTOR Response 
DEVICE QUALIFIER"
"54","21:35:40.401657000","10.0","host","USB","64","GET DESCRIPTOR Response 
DEVICE QUALIFIER"
"56","21:35:40.403673000","10.0","host","USB","64","GET DESCRIPTOR Response 
DEVICE QUALIFIER"

complete output from wireshark is attached. 

uploaded screen capture of system running. install, running and debug 
information in wireshark, if it is any use? 

See http://www.flickr.com/photos/114400307@N06/sets/72157639757915915/ 


The only other solution, is to install windows, or use another computer?.

Original issue reported on code.google.com by pjfuller...@gmail.com on 14 Jan 2014 at 3:03

Attachments:

• [poolmatehr mal](https://storage.googleapis.com/google-code-attachments/poolviewer/issue-1/comment-0/poolmatehr mal)
• [poolmatehr complete](https://storage.googleapis.com/google-code-attachments/poolviewer/issue-1/comment-0/poolmatehr complete)

[GoogleCodeExporter]

I made an update to the project, I removed the libusb, adding virtual ttyUSB 
serial support for the very same device.

Let me know if you want to test on your system.

Original comment by vcolo...@gmail.com on 1 Feb 2014 at 11:11

[ihewitt]

"PodA" support should now be working.