We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
This guide is for adding ad SD card to a Nano AP. I will use this module:
In the platformio.ini, change the 'board_build.partitions' esp32_sdcard.csv.
Add to the build_flags -D HAS_SDCARD
-D USE_SOFTSPI
-D SD_CARD_SS=11
-D SD_CARD_CLK=9
-D SD_CARD_MISO=8
-D SD_CARD_MOSI=10
If you build it now, you'll get an error message. We need to change one more thing.
For the hardware side, solder the wires. Format the SD card and it should work!