How to use ebusctl decode

[gperdach]

Hello,
I'd like to test decoding some messages from the ebus, but I don't know how to use it.
With ebusctl decode I tried this:
ebusctl decode "r,,DateTime,Datum Uhrzeit,,,B504,00,,,dcfstate;btime;bdate;temp2,,," 1008b50401000a0302470601100622100d
and some similar commands. For example without quotes and without the message part.
Can you help me, how I can use the decode feature?
Regards,
Gregor

[john30]

as stated in the help of the decode command, you can only pass the section beginning with the first field type and pass in the appropriate data part, i.e. in your example:
ebusctl decode "dcfstate;btime;bdate;temp2" 0302470601100622100d

[gperdach]

Thanks, this was working.
Is there a way to decode like
ebusctl grab result decode
for a single value to get all possible combinations?
For example:
ebusctl decodevalue 0003
to get
BCD 00=0, 03=3 BCD:2 0003=300 BCD:3 0003=300 BCD:4 0003=300 BDA 0003="08.02.1902" BDA:3 0003="08.02.1902" BDY 00=Mon, 03=Thu BDZ 0003="08.02.1902" BTI 0003="03:00" BTM 0003="03:00" D1B 00=0, 03=3 D1C 00=0.0, 03=1.5 D2B 0003=3.000 D2C 0003=48.00 DAY 0003="08.02.1902" EXP 0003=1.0762e-42 EXR 0003=4.2039e-45 FLR 0003=0.003 FLT 0003=0.768 HCD 0003=300 HCD:1 00=0, 03=3 HCD:2 0003=300 HCD:3 0003=300 HDA 0003="08.02.1902" HDA:3 0003="08.02.1902" HDY 00=Tue, 03=Fri HEX:2 0003="00 03" HTI 0003="00:03" HTM 0003="00:03" MIN 0003="12:48" NTS:2 0003="" PIN 0003=0003 S3N 0003=768 S3R 0003=3 SCH 00=0, 03=3 SIN 0003=768 SIR 0003=3 SLG 0003=768 SLR 0003=3 STR:2 0003="" TEM_P 0003=06-000 TTM 00="00:00", 03="00:30" U3N 0003=768 U3R 0003=3

[cyberthom42]

I have the same question. Lets assume I see the following message in the log:
received unknown MS cmd: 7108b51a0304d732 / 0ed707c0cfc07b3c00b01b20000000
Is there a way to perform a decode similar to the grab result decode, something like this (but this does not work):
ebusctl decode 0ed707c0cfc07b3c00b01b20000000