Skip to content

Latest commit

 

History

History
73 lines (56 loc) · 1.58 KB

README.md

File metadata and controls

73 lines (56 loc) · 1.58 KB
Raw

Documentation Status

pyBusPirateLite

Python library for BusPirate based on code from Garrett Berg. It tries to be more Pythonic than the original code.

This library allows using the following modes:

  • SPI
  • I2C
  • UART
  • Bitbang
  • Onewire
  • Rawwire
  • ADC measurements

For more information about the BusPirate see http://dangerousprototypes.com/docs/Bus_Pirate

Based on code from Garrett Berg cloudform511@gmail.com (http://dangerousprototypes.com/2011/03/14/new-version-of-pybuspiratelite-python-library/)

Note: Python 3.6 is required, mainly due to the use of f-strings.

Examples

SPI

from pyBusPirateLite.SPI import SPI

spi = SPI()
spi.pins = SPI.PIN_POWER | SPI.PIN_CS 
spi.config = SPI.CFG_PUSH_PULL | SPI.CFG_IDLE
spi.speed = '1MHz'

# send two bytes and receive answer
spi.cs = True
data = spi.transfer( [0x82, 0x00])
spi.cs = False

Bitbang

from pyBusPirateLite.BitBang import BitBang

bb = BitBang()
bb.outputs = bb.PIN_AUX
bb.pins = 0        # set aux pin = 0   
bb.pins = bb.PIN_AUX  # set aux pin = 1

I2C

from pyBusPirateLite.I2C import I2C
i2c = I2C()
i2c.speed = '400kHz'
i2c.configure(power=True)
i2c.write_then_read(2,0, [0xec, 0xf6])  # set write register
i2c.write_then_read(1,1,[ 0xed])        # read from register

Detect port

from pyBusPirateLite.BitBang import BitBang
bb = BitBang(connect=False)
port = bb.get_port()
print(port)
bb.connect()