Build your own autopilot for simulation cockpit.
Format for 6.25" stack
Electronics are design with EasyEDA.
3D parts are design with SolidWorks.
Parts printed with ANET A8 and CURA 15.04.6
Only electronics, you can choose the microcontroller of your choice, the base design have addtionnal card for Mega2560R3.
For mine i use Mega2560R3 and Mobiflight on MSFS2020--> MOBIFLIGHT
For others controllers you need to design the support for the card, or add wires to link them.
| Controller PIN | Header PIN | Description |
|---|---|---|
| 5V | 1 | 5V |
| 22 | 2 | Encoder double |
| 23 | 3 | Encoder double |
| 24 | 4 | Encoder double |
| 25 | 5 | Encoder double |
| 26 | 6 | Encoder double push button |
| 27 | 7 | Button AP |
| 28 | 8 | Button HDG |
| 29 | 9 | Button NAV |
| 30 | 10 | Button APR |
| 31 | 11 | Button REV |
| 32 | 12 | Button ALT |
| 33 | 13 | Button VS- |
| 34 | 14 | Button VS+ |
| 35 | 15 | Button ARM |
| 36 | 16 | Button BARO |
| 37 | 17 | Afficheur DIN |
| 38 | 18 | Afficheur LOAD (CS) |
| 39 | 19 | Afficheur CLK |
| 40 | 20 | Button LED AP |
| 41 | 21 | Button LED HDG |
| 42 | 22 | Button LED NAV |
| 43 | 23 | Button LED APR |
| 44 | 24 | Button LED REV |
| 45 | 25 | Button LED ALT |
| 46 | 26 | Button LED ARM |
| 47 | 27 | screen LED VS |
| 48 | 28 | screen LED BARO |
| 49 | 29 | Screen LED ALT |
| GND | 30 | GND |
- PLA BLACK, WHITE and CLEAR color
With CURA you need plugin PauseAtZ, i modified the plugin to add 2 pauses (printing buttons by example) download and install it--> Here
Build GNS530 -> GNS530