PCB with a vertical sensor layout

[jacekow]

Hi Kris,
Do you still have by a chance one unpopulated PCB of the previous version i.e. PCB with the vertical sensor layout (as it is shown in your project Readme)? I checked at Tindie but they have only the new board with "triad" sensor arrangement.
My plan is to evaluate your spectrometer for transmission measurement with a cuvette samples and for that that vertical layout is more suitable.
regards
Jacek

[kriswiner]

You can order the phere: https://oshpark.com/shared_projects/d7zS3K00

…

On Wed, Dec 4, 2019 at 1:34 PM jacekow ***@***.***> wrote: Hi Kris, Do you still have by a chance one unpopulated PCB of the previous version i.e. PCB with the vertical sensor layout (as it is shown in your project Readme)? I checked at Tindie but they have only the new board with "triad" sensor arrangement. My plan is to evaluate your spectrometer for transmission measurement with a cuvette samples and for that that vertical layout is more suitable. regards Jacek — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#6?email_source=notifications&email_token=ABTDLKQVUS5OHEKY7C2GSVDQXAO6VA5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4H6EEMWA>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABTDLKTFCOW3SY7NDNYBNETQXAO6VANCNFSM4JVPBT3Q> .

[jacekow]

Hi Kris, Many thanks for your prompt answer. I have already ordered the boards and I will keep you informed on the progress. Best regards Jacek Owczarczyk śr., 4 gru 2019 o 22:53 Kris Winer <notifications@github.com> napisał(a):

…

You can order the phere: https://oshpark.com/shared_projects/d7zS3K00 On Wed, Dec 4, 2019 at 1:34 PM jacekow ***@***.***> wrote: > Hi Kris, > Do you still have by a chance one unpopulated PCB of the previous version > i.e. PCB with the vertical sensor layout (as it is shown in your project > Readme)? I checked at Tindie but they have only the new board with "triad" > sensor arrangement. > My plan is to evaluate your spectrometer for transmission measurement with > a cuvette samples and for that that vertical layout is more suitable. > regards > Jacek > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > < #6?email_source=notifications&email_token=ABTDLKQVUS5OHEKY7C2GSVDQXAO6VA5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4H6EEMWA >, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/ABTDLKTFCOW3SY7NDNYBNETQXAO6VANCNFSM4JVPBT3Q > > . > — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#6?email_source=notifications&email_token=AH5ET66IVR6I75M3CU2ZHW3QXARGBA5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEF6T5TY#issuecomment-561856207>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AH5ET64322QUOICR7KPOMETQXARGBANCNFSM4JVPBT3Q> .

[jacekow]

Kris, just one more question: the schematics and the element layout of the actual board version (AS7265X.v02c) - where I can get them from?
Jacek

[kriswiner]

You can download the design files from OSH Park at the link I sent.

…

On Thu, Dec 5, 2019 at 6:19 AM jacekow ***@***.***> wrote: Kris, just one more question: the schematics and the element layout of the actual board version (AS7265X.v02c) - where I can get them from? Jacek — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#6?email_source=notifications&email_token=ABTDLKVOQTMC7NFJU5YGXRTQXEEX3A5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEGA3KIQ#issuecomment-562148642>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABTDLKXEOXDIO6UNNOGPAB3QXEEX3ANCNFSM4JVPBT3Q> .

[jacekow]

Got them, thanks czw., 5 gru 2019 o 17:57 Kris Winer <notifications@github.com> napisał(a):

…

You can download the design files from OSH Park at the link I sent. On Thu, Dec 5, 2019 at 6:19 AM jacekow ***@***.***> wrote: > Kris, just one more question: the schematics and the element layout of the > actual board version (AS7265X.v02c) - where I can get them from? > Jacek > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub > < #6?email_source=notifications&email_token=ABTDLKVOQTMC7NFJU5YGXRTQXEEX3A5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEGA3KIQ#issuecomment-562148642 >, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/ABTDLKXEOXDIO6UNNOGPAB3QXEEX3ANCNFSM4JVPBT3Q > > . > — You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub <#6?email_source=notifications&email_token=AH5ET634PSFDE5WODTRBH53QXEXJBA5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEGBMHXI#issuecomment-562217949>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AH5ET64ZEYMCX7AJUHTRSULQXEXJBANCNFSM4JVPBT3Q> .

[jacekow]

Hi Kris, All the best in 2020! I just received the boards: AS7265Xv02c (PeskyProducts/OSH Park) and I started preparation for the assemblage. On the schematics AS7265Xv02c.sch) there are following annotations: U1 is annotated: ‘AS7265X’ -> should it be ‘AS72651’? U2 is annotated: ‘AS72652’ -> should it be ‘AS72652’? U3 is annotated: ‘AS72652’ -> should it be ‘AS72653’? On the schematics there are two IR LEDS (850nm and 940nm) and there is no UV LED. And which LED should be connected to which sensor? In SPARKFUN Triad there is the following allocation: AS72651 (UV), AS72652 (VIS), and AS72653 (IR). BTW, it would be possible to run the TRIAD software on your board? Kind regards Jacek czw., 5 gru 2019 o 17:57 Kris Winer <notifications@github.com> napisał(a):

…

You can download the design files from OSH Park at the link I sent. On Thu, Dec 5, 2019 at 6:19 AM jacekow ***@***.***> wrote: > Kris, just one more question: the schematics and the element layout of the > actual board version (AS7265X.v02c) - where I can get them from? > Jacek > > — > You are receiving this because you commented. > Reply to this email directly, view it on GitHub > < #6?email_source=notifications&email_token=ABTDLKVOQTMC7NFJU5YGXRTQXEEX3A5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEGA3KIQ#issuecomment-562148642 >, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/ABTDLKXEOXDIO6UNNOGPAB3QXEEX3ANCNFSM4JVPBT3Q > > . > — You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub <#6?email_source=notifications&email_token=AH5ET634PSFDE5WODTRBH53QXEXJBA5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEGBMHXI#issuecomment-562217949>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AH5ET64ZEYMCX7AJUHTRSULQXEXJBANCNFSM4JVPBT3Q> .

[kriswiner]

Hi Jacek, The sensors are indicated on the board silkscreen. The leds are arbitrary, you can select whatever you want. I don;t know anything about Sparkfun's software. Kris

…

On Tue, Jan 14, 2020 at 12:01 PM jacekow ***@***.***> wrote: Hi Kris, All the best in 2020! I just received the boards: AS7265Xv02c (PeskyProducts/OSH Park) and I started preparation for the assemblage. On the schematics AS7265Xv02c.sch) there are following annotations: U1 is annotated: ‘AS7265X’ -> should it be ‘AS72651’? U2 is annotated: ‘AS72652’ -> should it be ‘AS72652’? U3 is annotated: ‘AS72652’ -> should it be ‘AS72653’? On the schematics there are two IR LEDS (850nm and 940nm) and there is no UV LED. And which LED should be connected to which sensor? In SPARKFUN Triad there is the following allocation: AS72651 (UV), AS72652 (VIS), and AS72653 (IR). BTW, it would be possible to run the TRIAD software on your board? Kind regards Jacek czw., 5 gru 2019 o 17:57 Kris Winer ***@***.***> napisał(a): > You can download the design files from OSH Park at the link I sent. > > On Thu, Dec 5, 2019 at 6:19 AM jacekow ***@***.***> wrote: > > > Kris, just one more question: the schematics and the element layout of > the > > actual board version (AS7265X.v02c) - where I can get them from? > > Jacek > > > > — > > You are receiving this because you commented. > > Reply to this email directly, view it on GitHub > > < > #6?email_source=notifications&email_token=ABTDLKVOQTMC7NFJU5YGXRTQXEEX3A5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEGA3KIQ#issuecomment-562148642 > >, > > or unsubscribe > > < > https://github.com/notifications/unsubscribe-auth/ABTDLKXEOXDIO6UNNOGPAB3QXEEX3ANCNFSM4JVPBT3Q > > > > . > > > > — > You are receiving this because you modified the open/close state. > Reply to this email directly, view it on GitHub > < #6?email_source=notifications&email_token=AH5ET634PSFDE5WODTRBH53QXEXJBA5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEGBMHXI#issuecomment-562217949 >, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/AH5ET64ZEYMCX7AJUHTRSULQXEXJBANCNFSM4JVPBT3Q > > . > — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#6?email_source=notifications&email_token=ABTDLKRT3DAKPW74GPBCGQTQ5YKX7A5CNFSM4JVPBT32YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEI55QVY#issuecomment-574347351>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABTDLKQIY4WR53Y2BQHXULDQ5YKX7ANCNFSM4JVPBT3Q> .