minikube not starting

[VijaykantMohan]

What Happened?

[admin@fedora ~]$ minikube start -p mini2 --driver=docker
😄 [mini2] minikube v1.30.1 on Fedora 38 (arm64)
✨ Using the docker driver based on existing profile
👍 Starting control plane node mini2 in cluster mini2
🚜 Pulling base image ...
🏃 Updating the running docker "mini2" container ...
🐳 Preparing Kubernetes v1.26.3 on Docker 23.0.2 ...
💢 initialization failed, will try again: wait: /bin/bash -c "sudo env PATH="/var/lib/minikube/binaries/v1.26.3:$PATH" kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,NumCPU,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 1
stdout:
[init] Using Kubernetes version: v1.26.3
[preflight] Running pre-flight checks

stderr:
W0517 17:44:11.067569 4129 initconfiguration.go:119] Usage of CRI endpoints without URL scheme is deprecated and can cause kubelet errors in the future. Automatically prepending scheme "unix" to the "criSocket" with value "/var/run/cri-dockerd.sock". Please update your configuration!
[WARNING Swap]: swap is enabled; production deployments should disable swap unless testing the NodeSwap feature gate of the kubelet
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase preflight: [preflight] Some fatal errors occurred:
[ERROR KubeletVersion]: couldn't get kubelet version: cannot execute 'kubelet --version': exit status 255
[preflight] If you know what you are doing, you can make a check non-fatal with --ignore-preflight-errors=...
To see the stack trace of this error execute with --v=5 or higher

💣 Error starting cluster: wait: /bin/bash -c "sudo env PATH="/var/lib/minikube/binaries/v1.26.3:$PATH" kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,NumCPU,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 1
stdout:
[init] Using Kubernetes version: v1.26.3
[preflight] Running pre-flight checks

stderr:
W0517 17:44:21.294999 5698 initconfiguration.go:119] Usage of CRI endpoints without URL scheme is deprecated and can cause kubelet errors in the future. Automatically prepending scheme "unix" to the "criSocket" with value "/var/run/cri-dockerd.sock". Please update your configuration!
[WARNING Swap]: swap is enabled; production deployments should disable swap unless testing the NodeSwap feature gate of the kubelet
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase preflight: [preflight] Some fatal errors occurred:
[ERROR KubeletVersion]: couldn't get kubelet version: cannot execute 'kubelet --version': exit status 255
[preflight] If you know what you are doing, you can make a check non-fatal with --ignore-preflight-errors=...
To see the stack trace of this error execute with --v=5 or higher

╭───────────────────────────────────────────────────────────────────────────────────────────╮
│ │
│ 😿 If the above advice does not help, please let us know: │
│ 👉 https://github.com/kubernetes/minikube/issues/new/choose │
│ │
│ Please run minikube logs --file=logs.txt and attach logs.txt to the GitHub issue. │
│ │
╰───────────────────────────────────────────────────────────────────────────────────────────╯

❌ Exiting due to GUEST_START: failed to start node: wait: /bin/bash -c "sudo env PATH="/var/lib/minikube/binaries/v1.26.3:$PATH" kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,NumCPU,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 1
stdout:
[init] Using Kubernetes version: v1.26.3
[preflight] Running pre-flight checks

stderr:
W0517 17:44:21.294999 5698 initconfiguration.go:119] Usage of CRI endpoints without URL scheme is deprecated and can cause kubelet errors in the future. Automatically prepending scheme "unix" to the "criSocket" with value "/var/run/cri-dockerd.sock". Please update your configuration!
[WARNING Swap]: swap is enabled; production deployments should disable swap unless testing the NodeSwap feature gate of the kubelet
[WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
error execution phase preflight: [preflight] Some fatal errors occurred:
[ERROR KubeletVersion]: couldn't get kubelet version: cannot execute 'kubelet --version': exit status 255
[preflight] If you know what you are doing, you can make a check non-fatal with --ignore-preflight-errors=...
To see the stack trace of this error execute with --v=5 or higher

╭───────────────────────────────────────────────────────────────────────────────────────────╮
│ │
│ 😿 If the above advice does not help, please let us know: │
│ 👉 https://github.com/kubernetes/minikube/issues/new/choose │
│ │
│ Please run minikube logs --file=logs.txt and attach logs.txt to the GitHub issue. │
│ │
╰───────────────────────────────────────────────────────────────────────────────────────────╯

Attach the log file

logs.txt

Operating System

Redhat/Fedora

Driver

None

[VijaykantMohan]

What Happened?

[admin@fedora ~]$ minikube start -p mini2 --driver=docker smile [mini2] minikube v1.30.1 on Fedora 38 (arm64) sparkles Using the docker driver based on existing profile +1 Starting control plane node mini2 in cluster mini2 tractor Pulling base image ... runner Updating the running docker "mini2" container ... whale Preparing Kubernetes v1.26.3 on Docker 23.0.2 ... anger initialization failed, will try again: wait: /bin/bash -c "sudo env PATH="/var/lib/minikube/binaries/v1.26.3:$PATH" kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,NumCPU,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 1 stdout: [init] Using Kubernetes version: v1.26.3 [preflight] Running pre-flight checks

stderr: W0517 17:44:11.067569 4129 initconfiguration.go:119] Usage of CRI endpoints without URL scheme is deprecated and can cause kubelet errors in the future. Automatically prepending scheme "unix" to the "criSocket" with value "/var/run/cri-dockerd.sock". Please update your configuration! [WARNING Swap]: swap is enabled; production deployments should disable swap unless testing the NodeSwap feature gate of the kubelet [WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service' error execution phase preflight: [preflight] Some fatal errors occurred: [ERROR KubeletVersion]: couldn't get kubelet version: cannot execute 'kubelet --version': exit status 255 [preflight] If you know what you are doing, you can make a check non-fatal with --ignore-preflight-errors=... To see the stack trace of this error execute with --v=5 or higher

bomb Error starting cluster: wait: /bin/bash -c "sudo env PATH="/var/lib/minikube/binaries/v1.26.3:$PATH" kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,NumCPU,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 1 stdout: [init] Using Kubernetes version: v1.26.3 [preflight] Running pre-flight checks

stderr: W0517 17:44:21.294999 5698 initconfiguration.go:119] Usage of CRI endpoints without URL scheme is deprecated and can cause kubelet errors in the future. Automatically prepending scheme "unix" to the "criSocket" with value "/var/run/cri-dockerd.sock". Please update your configuration! [WARNING Swap]: swap is enabled; production deployments should disable swap unless testing the NodeSwap feature gate of the kubelet [WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service' error execution phase preflight: [preflight] Some fatal errors occurred: [ERROR KubeletVersion]: couldn't get kubelet version: cannot execute 'kubelet --version': exit status 255 [preflight] If you know what you are doing, you can make a check non-fatal with --ignore-preflight-errors=... To see the stack trace of this error execute with --v=5 or higher

╭───────────────────────────────────────────────────────────────────────────────────────────╮ │ │ │ crying_cat_face If the above advice does not help, please let us know: │ │ point_right https://github.com/kubernetes/minikube/issues/new/choose │ │ │ │ Please run minikube logs --file=logs.txt and attach logs.txt to the GitHub issue. │ │ │ ╰───────────────────────────────────────────────────────────────────────────────────────────╯

x Exiting due to GUEST_START: failed to start node: wait: /bin/bash -c "sudo env PATH="/var/lib/minikube/binaries/v1.26.3:$PATH" kubeadm init --config /var/tmp/minikube/kubeadm.yaml --ignore-preflight-errors=DirAvailable--etc-kubernetes-manifests,DirAvailable--var-lib-minikube,DirAvailable--var-lib-minikube-etcd,FileAvailable--etc-kubernetes-manifests-kube-scheduler.yaml,FileAvailable--etc-kubernetes-manifests-kube-apiserver.yaml,FileAvailable--etc-kubernetes-manifests-kube-controller-manager.yaml,FileAvailable--etc-kubernetes-manifests-etcd.yaml,Port-10250,Swap,NumCPU,Mem,SystemVerification,FileContent--proc-sys-net-bridge-bridge-nf-call-iptables": Process exited with status 1 stdout: [init] Using Kubernetes version: v1.26.3 [preflight] Running pre-flight checks

stderr: W0517 17:44:21.294999 5698 initconfiguration.go:119] Usage of CRI endpoints without URL scheme is deprecated and can cause kubelet errors in the future. Automatically prepending scheme "unix" to the "criSocket" with value "/var/run/cri-dockerd.sock". Please update your configuration! [WARNING Swap]: swap is enabled; production deployments should disable swap unless testing the NodeSwap feature gate of the kubelet [WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service' error execution phase preflight: [preflight] Some fatal errors occurred: [ERROR KubeletVersion]: couldn't get kubelet version: cannot execute 'kubelet --version': exit status 255 [preflight] If you know what you are doing, you can make a check non-fatal with --ignore-preflight-errors=... To see the stack trace of this error execute with --v=5 or higher

╭───────────────────────────────────────────────────────────────────────────────────────────╮ │ │ │ crying_cat_face If the above advice does not help, please let us know: │ │ point_right https://github.com/kubernetes/minikube/issues/new/choose │ │ │ │ Please run minikube logs --file=logs.txt and attach logs.txt to the GitHub issue. │ │ │ ╰───────────────────────────────────────────────────────────────────────────────────────────╯

Attach the log file

logs.txt

Operating System

Redhat/Fedora

Driver

Docker

[VijaykantMohan]

Any help really appreciated.. please do the needful..

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue as fresh with /remove-lifecycle stale
• Close this issue with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue as fresh with /remove-lifecycle rotten
• Close this issue with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue with /reopen
• Mark this issue as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close not-planned

[k8s-ci-robot]

@k8s-triage-robot: Closing this issue, marking it as "Not Planned".

In response to this:

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue with /reopen
• Mark this issue as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close not-planned

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.