Permalink
Fetching contributors…
Cannot retrieve contributors at this time
199 lines (162 sloc) 3.3 KB
/* mbed Microcontroller Library
* Copyright (c) 2013 Nordic Semiconductor
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
#define PORT_SHIFT 3
typedef enum {
p0 = 0,
p1 = 1,
p2 = 2,
p3 = 3,
p4 = 4,
p5 = 5,
p6 = 6,
p7 = 7,
p8 = 8,
p9 = 9,
p10 = 10,
p11 = 11,
p12 = 12,
p13 = 13,
p14 = 14,
p15 = 15,
p16 = 16,
p17 = 17,
p18 = 18,
p19 = 19,
p20 = 20,
p21 = 21,
p22 = 22,
p23 = 23,
p24 = 24,
p25 = 25,
p26 = 26,
p27 = 27,
p28 = 28,
p29 = 29,
p30 = 30,
//NORMAL PINS...
P0_0 = p0,
P0_1 = p1,
P0_2 = p2,
P0_3 = p3,
P0_4 = p4,
P0_5 = p5,
P0_6 = p6,
P0_7 = p7,
P0_8 = p8,
P0_9 = p9,
P0_10 = p10,
P0_11 = p11,
P0_12 = p12,
P0_13 = p13,
P0_14 = p14,
P0_15 = p15,
P0_16 = p16,
P0_17 = p17,
P0_18 = p18,
P0_19 = p19,
P0_20 = p20,
P0_21 = p21,
P0_22 = p22,
P0_23 = p23,
P0_24 = p24,
P0_25 = p25,
P0_26 = p26,
P0_27 = p27,
P0_28 = p28,
P0_29 = p29,
P0_30 = p30,
//PADS
PAD3 = p1,
PAD2 = p2,
PAD1 = p3,
//LED MATRIX COLS
COL1 = p4,
COL2 = p5,
COL3 = p6,
COL4 = p7,
COL5 = p8,
COL6 = p9,
COL7 = p10,
COL8 = p11,
COL9 = p12,
//LED MATRIX ROWS
ROW1 = p13,
ROW2 = p14,
ROW3 = p15,
//NORMAL PIN (NO SPECIFIED FUNCTIONALITY)
//PIN_16
// BUTTON A
BUTTON_A = p17,
//NORMAL PIN (NO SPECIFIED FUNCTIONALITY)
//PIN_18
//TARGET RESET
TGT_NRESET = p19,
//NORMAL PIN (NO SPECIFIED FUNCTIONALITY)
//PIN_20
//MASTER OUT SLAVE IN
MOSI = p21,
//MASTER IN SLAVE OUT
MISO = p22,
//SERIAL CLOCK
SCK = p23,
// RX AND TX PINS
TGT_TX = p24,
TGT_RX = p25,
//BUTTON B
BUTTON_B = p26,
//ACCEL INTERRUPT PINS (MMA8653FC)
ACCEL_INT2 = p27,
ACCEL_INT1 = p28,
//MAGENETOMETER INTERRUPT PIN (MAG3110)
MAG_INT1 = p29,
// Not connected
NC = (int)0xFFFFFFFF,
RX_PIN_NUMBER = TGT_RX,
TX_PIN_NUMBER = TGT_TX,
CTS_PIN_NUMBER = 31, //unused ** REQUIRES A PROPER FIX **
RTS_PIN_NUMBER = 31, //unused
// mBed interface Pins
USBTX = TX_PIN_NUMBER,
USBRX = RX_PIN_NUMBER,
LED1 = PAD1,
LED2 = PAD2,
LED3 = PAD3,
LED4 = P0_16,
//SDA (SERIAL DATA LINE)
I2C_SDA0 = p30,
//SCL (SERIAL CLOCK LINE)
I2C_SCL0 = p0
} PinName;
typedef enum {
PullNone = 0,
PullDown = 1,
PullUp = 3,
PullDefault = PullUp
} PinMode;
#ifdef __cplusplus
}
#endif
#endif