#firewall

####Table of Contents

Overview - What is the Firewall module?
Module Description - What does the module do?
Setup - The basics of getting started with Firewall
Usage - Configuration and customization options
Reference - An under-the-hood peek at what the module is doing
Limitations - OS compatibility, etc.
Development - Guide for contributing to the module
- Tests - Testing your configuration

##Overview

The Firewall module lets you manage firewall rules with Puppet.

##Module Description

PuppetLabs' Firewall module introduces the firewall resource, which is used to manage and configure firewall rules from within the Puppet DSL. This module offers support for iptables and ip6tables. The module also introduces the firewallchain resource, which allows you to manage chains or firewall lists and ebtables for bridging support. At the moment, only iptables and ip6tables chains are supported.

The Firewall module acts on your running firewall, making immediate changes as the catalog executes. Defining default pre and post rules allows you to provide global defaults for your hosts before and after any custom rules. Defining pre and post rules is also necessary to help you avoid locking yourself out of your own boxes when Puppet runs.

##Setup

###What Firewall Affects

Every node running a firewall
Firewall settings in your system
Connection settings for managed nodes
Unmanaged resources (get purged)

###Setup Requirements

Firewall uses Ruby-based providers, so you must enable pluginsync enabled.

###Beginning with Firewall

In the following two sections, you create new classes and then create firewall rules related to those classes. These steps are optional, but provide a framework for firewall rules, which is helpful if you’re just starting to create them.

If you already have rules in place, then you don’t need to do these two sections. However, be aware of the ordering of your firewall rules. The module will dynamically apply rules in the order they appear in the catalog, meaning a deny rule could be applied before the allow rules. This might mean the module hasn’t established some of the important connections, such as the connection to the Puppet master.

The following steps are designed to ensure that you keep your SSH and other connections, primarily your connection to your Puppet master. If you create the pre and post classes described in the first section, then you also need to create the rules described in the second section.

####Create the my_fw::pre and my_fw::post Classes

This approach employs a whitelist setup, so you can define what rules you want and everything else is ignored rather than removed.

The code in this section does the following:

The require parameter in Firewall {} ensures my_fw::pre is run before any other rules.
In the my_fw::post class declaration, the before parameter ensures my_fw::post is run after any other rules.

Therefore, the run order is:

The rules in my_fw::pre
Your rules (defined in code)
The rules in my_fw::post

The rules in the pre and post classes are fairly general. These two classes ensure that you retain connectivity, and that you drop unmatched packets appropriately. The rules you define in your manifests are likely specific to the applications you run.

Add the pre class to my_fw/manifests/pre.pp. pre.pp should contain any default rules to be applied first. The rules in this class should be added in the order you want them to run.

class my_fw::pre { Firewall { require => undef, }

Default firewall rules

firewall { '000 accept all icmp': proto => 'icmp', action => 'accept', }-> firewall { '001 accept all to lo interface': proto => 'all', iniface => 'lo', action => 'accept', }-> firewall { '002 accept related established rules': proto => 'all', ctstate => ['RELATED', 'ESTABLISHED'], action => 'accept', } }

The rules in pre should allow basic networking (such as ICMP and TCP), and ensure that existing connections are not closed.

Add the post class to my_fw/manifests/post.pp and include any default rules to be applied last.

class my_fw::post { firewall { '999 drop all': proto => 'all', action => 'drop', before => undef, } }

####Create Firewall Rules

The rules you create here are helpful if you don’t have any existing rules; they help you order your firewall configurations so you don’t lock yourself out of your box.

Rules are persisted automatically between reboots, although there are known issues with ip6tables on older Debian/Ubuntu distributions. There are also known issues with ebtables.

In site.pp or another top-scope file, add the following code to set up a metatype to purge unmanaged firewall resources. This will clear any existing rules and make sure that only rules defined in Puppet exist on the machine.

Note - This only purges IPv4 rules.

resources { "firewall":
  purge => true
}

Use the following code to set up the default parameters for all of the firewall rules you will establish later. These defaults will ensure that the pre and post classes are run in the correct order to avoid locking you out of your box during the first Puppet run.

Firewall { before => Class['my_fw::post'], require => Class['my_fw::pre'], }
Then, declare the my_fw::pre and my_fw::post classes to satisfy dependencies. You can declare these classes using an External Node Classifier or the following code:

class { ['my_fw::pre', 'my_fw::post']: }
Include the firewall class to ensure the correct packages are installed.

class { 'firewall': }

###Upgrading

Use these steps if you already have a version of the Firewall module installed.

####From version 0.2.0 and more recent

Upgrade the module with the puppet module tool as normal:

puppet module upgrade puppetlabs/firewall

##Usage

There are two kinds of firewall rules you can use with Firewall: default rules and application-specific rules. Default rules apply to general firewall settings, whereas application-specific rules manage firewall settings for a specific application, node, etc.

All rules employ a numbering system in the resource's title that is used for ordering. When titling your rules, make sure you prefix the rule with a number, for example, 000 accept all icmp requests

  000 runs first
  999 runs last

###Default Rules

You can place default rules in either my_fw::pre or my_fw::post, depending on when you would like them to run. Rules placed in the pre class will run first, and rules in the post class, last.

In iptables, the title of the rule is stored using the comment feature of the underlying firewall subsystem. Values must match '/^\d+[[:alpha:][:digit:][:punct:][:space:]]+$/'.

####Examples of Default Rules

Basic accept ICMP request example:

firewall { "000 accept all icmp requests":
  proto  => "icmp",
  action => "accept",
}

Drop all:

firewall { "999 drop all other requests":
  action => "drop",
}

###Application-Specific Rules

Puppet doesn't care where you define rules, and this means that you can place your firewall resources as close to the applications and services that you manage as you wish. If you use the roles and profiles pattern then it makes sense to create your firewall rules in the profiles, so that they remain close to the services managed by the profile.

This is an example of firewall rules in a profile:

class profile::apache {
  include apache
  apache::vhost { 'mysite': ensure => present }

  firewall { '100 allow http and https access':
    port   => [80, 443],
    proto  => tcp,
    action => accept,
  }
}

###Rule inversion Firewall rules may be inverted by prefixing the value of a parameter by "! ". If the value is an array, then every item in the array must be prefixed as iptables does not understand inverting a single value.

Parameters that understand inversion are: connmark, ctstate, destination, dport, dst_range, dst_type, port, proto, source, sport, src_range, src_type, and state.

Examples:

firewall { '001 disallow esp protocol':
  action => 'accept',
  proto  => '! esp',
}
firewall { '002 drop NEW external website packets with FIN/RST/ACK set and SYN unset':
  chain     => 'INPUT',
  state     => 'NEW',
  action    => 'drop',
  proto     => 'tcp',
  sport     => ['! http', '! 443'],
  source    => '! 10.0.0.0/8',
  tcp_flags => '! FIN,SYN,RST,ACK SYN',
}

###Additional Uses for the Firewall Module

You can apply firewall rules to specific nodes. Usually, you will want to put the firewall rule in another class and apply that class to a node. Apply a rule to a node as follows:

node 'some.node.com' {
  firewall { '111 open port 111':
    dport => 111
  }
}

You can also do more complex things with the firewall resource. This example sets up static NAT for the source network 10.1.2.0/24:

firewall { '100 snat for network foo2':
  chain    => 'POSTROUTING',
  jump     => 'MASQUERADE',
  proto    => 'all',
  outiface => "eth0",
  source   => '10.1.2.0/24',
  table    => 'nat',
}

The following example creates a new chain and forwards any port 5000 access to it.

firewall { '100 forward to MY_CHAIN':
  chain   => 'INPUT',
  jump    => 'MY_CHAIN',
}
# The namevar here is in the format chain_name:table:protocol
firewallchain { 'MY_CHAIN:filter:IPv4':
  ensure  => present,
}
firewall { '100 my rule':
  chain   => 'MY_CHAIN',
  action  => 'accept',
  proto   => 'tcp',
  dport   => 5000,
}

###Additional Information

Access the inline documentation:

puppet describe firewall

Or

puppet doc -r type
(and search for firewall)

##Reference

Classes:

firewall

Types:

firewall
firewallchain

Facts:

ip6tables_version
iptables_version
iptables_persistent_version

###Class: firewall

Performs the basic setup tasks required for using the firewall resources.

At the moment this takes care of:

iptables-persistent package installation

Include the firewall class for nodes that need to use the resources in this module:

class { 'firewall': }

####ensure

Parameter that controls the state of the iptables service on your system, allowing you to disable iptables if you want.

ensure can either be running or stopped. Default to running.

###Type: firewall

This type enables you to manage firewall rules within Puppet.

Providers

Note: Not all features are available with all providers.

ip6tables: Ip6tables type provider
- Required binaries: ip6tables-save, ip6tables.
- Supported features: connection_limiting, dnat, hop_limiting, icmp_match, interface_match, iptables, isfirstfrag, ishasmorefrags, islastfrag, log_level, log_prefix, mark, owner, pkttype, rate_limiting, recent_limiting, reject_type, snat, state_match, tcp_flags.
iptables: Iptables type provider
- Required binaries: iptables-save, iptables.
- Default for kernel == linux.
- Supported features: address_type, connection_limiting, dnat, icmp_match, interface_match, iprange, ipsec_dir, ipsec_policy, iptables, isfragment, log_level, log_prefix, mark, owner, pkttype, rate_limiting, recent_limiting, reject_type, snat, socket, state_match, tcp_flags.

Autorequires:

If Puppet is managing the iptables or ip6tables chains specified in the chain or jump parameters, the firewall resource will autorequire those firewallchain resources.

If Puppet is managing the iptables or iptables-persistent packages, and the provider is iptables or ip6tables, the firewall resource will autorequire those packages to ensure that any required binaries are installed.

Features

address_type: The ability to match on source or destination address type.
connection_limiting: Connection limiting features.
dnat: Destination NATing.
hop_limiting: Hop limiting features.
icmp_match: The ability to match ICMP types.
interface_match: Interface matching.
iprange: The ability to match on source or destination IP range.
ipsec_dir: The ability to match IPsec policy direction.
ipsec_policy: The ability to match IPsec policy.
iptables: The provider provides iptables features.
isfirstfrag: The ability to match the first fragment of a fragmented ipv6 packet.
isfragment: The ability to match fragments.
ishasmorefrags: The ability to match a non-last fragment of a fragmented ipv6 packet.
islastfrag: The ability to match the last fragment of an ipv6 packet.
log_level: The ability to control the log level.
log_prefix: The ability to add prefixes to log messages.
mark: The ability to match or set the netfilter mark value associated with the packet.
mask: The ability to match recent rules based on the ipv4 mask.
owner: The ability to match owners.
pkttype: The ability to match a packet type.
rate_limiting: Rate limiting features.
recent_limiting: The netfilter recent module.
reject_type: The ability to control reject messages.
snat: Source NATing.
socket: The ability to match open sockets.
state_match: The ability to match stateful firewall states.
tcp_flags: The ability to match on particular TCP flag settings.

Parameters

action: This is the action to perform on a match. Valid values for this action are:
- 'accept': The packet is accepted.
- 'reject': The packet is rejected with a suitable ICMP response.
- 'drop': The packet is dropped.
If you specify no value it will simply match the rule but perform no action unless you provide a provider-specific parameter (such as jump).
burst: Rate limiting burst value (per second) before limit checks apply. Values must match '/^\d+$/'. Requires the rate_limiting feature.
chain: Name of the chain to use. You can provide a user-based chain or use one of the following built-in chains:'INPUT','FORWARD','OUTPUT','PREROUTING', or 'POSTROUTING'. The default value is 'INPUT'. Values must match '/^[a-zA-Z0-9-_]+$/'. Requires the iptables feature.
connlimit_above: Connection limiting value for matched connections above n. Values must match '/^\d+$/'. Requires the connection_limiting feature.
connlimit_mask: Connection limiting by subnet mask for matched connections. Apply a subnet mask of /0 to /32 for IPv4, and a subnet mask of /0 to /128 for IPv6. Values must match '/^\d+$/'. Requires the connection_limiting feature.
connmark: Match the Netfilter mark value associated with the packet. Accepts values mark/mask or mark. These will be converted to hex if they are not hex already. Requires the mark feature.
ctstate: Matches a packet based on its state in the firewall stateful inspection table, using the conntrack module. Valid values are: 'INVALID', 'ESTABLISHED', 'NEW', 'RELATED'. Requires the state_match feature.
destination: The destination address to match. For example: destination => '192.168.1.0/24'. You can also negate a mask by putting ! in front. For example: destination => '! 192.168.2.0/24'. The destination can also be an IPv6 address if your provider supports it.

For some firewall providers you can pass a range of ports in the format: 'start number-end number'. For example, '1-1024' would cover ports 1 to 1024.
dport: The destination port to match for this filter (if the protocol supports ports). Will accept a single element or an array. For some firewall providers you can pass a range of ports in the format: 'start number-end number'. For example, '1-1024' would cover ports 1 to 1024.
dst_range: The destination IP range. For example: dst_range => '192.168.1.1-192.168.1.10'.

The destination IP range is must in 'IP1-IP2' format. Values must match '0.0.0.0-0.0.0.0' through '255.255.255.255-255.255.255.255'. Requires the iprange feature.
dst_type: The destination address type. For example: dst_type => 'LOCAL'.

Valid values are:
- 'UNSPEC': an unspecified address
- 'UNICAST': a unicast address
- 'LOCAL': a local address
- 'BROADCAST': a broadcast address
- 'ANYCAST': an anycast packet
- 'MULTICAST': a multicast address
- 'BLACKHOLE': a blackhole address
- 'UNREACHABLE': an unreachable address
- 'PROHIBIT': a prohibited address
- 'THROW': an unroutable address
- 'XRESOLVE: an unresolvable address
Requires the address_type feature.
ensure: Ensures that the resource is present. Valid values are 'present', 'absent'. The default is 'present'.
gid: GID or Group owner matching rule. Accepts a string argument only, as iptables does not accept multiple gid in a single statement. Requires the owner feature.
hop_limit: Hop limiting value for matched packets. Values must match '/^\d+$/'. Requires the hop_limiting feature.
icmp: When matching ICMP packets, this indicates the type of ICMP packet to match. A value of 'any' is not supported. To match any type of ICMP packet, the parameter should be omitted or undefined. Requires the icmp_match feature.
iniface: Input interface to filter on. Values must match '/^[a-zA-Z0-9-._+]+$/'. Requires the interface_match feature.
ipsec_dir: Sets the ipsec policy direction. Valid values are 'in', 'out'. Requires the ipsec_dir feature.
ipsec_policy: Sets the ipsec policy type. Valid values are 'none', 'ipsec'. Requires the ipsec_policy feature.
isfirstfrag: If true, matches when the packet is the first fragment of a fragmented ipv6 packet. Cannot be negated. Supported by ipv6 only. Valid values are 'true', 'false'. Requires the isfirstfrag feature.
isfragment: If 'true', matches when the packet is a tcp fragment of a fragmented packet. Supported by iptables only. Valid values are 'true', 'false'. Requires features isfragment.
ishasmorefrags: If 'true', matches when the packet has the 'more fragments' bit set. Supported by ipv6 only. Valid values are 'true', 'false'. Requires the ishasmorefrags feature.
islastfrag: If true, matches when the packet is the last fragment of a fragmented ipv6 packet. Supported by ipv6 only. Valid values are 'true', 'false'. Requires the islastfrag.
jump: The value for the iptables --jump parameter. Any valid chain name is allowed, but normal values are: 'QUEUE', 'RETURN', 'DNAT', 'SNAT', 'LOG', 'MASQUERADE', 'REDIRECT', 'MARK'.

For the values 'ACCEPT', 'DROP', and 'REJECT', you must use the generic action parameter. This is to enforce the use of generic parameters where possible for maximum cross-platform modeling.

If you set both accept and jump parameters, you will get an error, because only one of the options should be set. Requires the iptables feature.
limit: Rate limiting value for matched packets. The format is: 'rate/[/second/|/minute|/hour|/day]'. Example values are: '50/sec', '40/min', '30/hour', '10/day'. Requires the rate_limiting feature.
line: Read-only property for caching the rule line.
log_level: When combined with jump => 'LOG' specifies the system log level to log to. Requires the log_level feature.
log_prefix: When combined with jump => 'LOG' specifies the log prefix to use when logging. Requires the log_prefix feature.
mask: Sets the mask to use when recent is enabled. Requires the mask feature.
name: The canonical name of the rule. This name is also used for ordering, so make sure you prefix the rule with a number. For example:

firewall { '000 this runs first':
  # this rule will run first
}
firewall { '999 this runs last':
  # this rule will run last
}

Depending on the provider, the name of the rule can be stored using the comment feature of the underlying firewall subsystem. Values must match '/^\d+[[:alpha:][:digit:][:punct:][:space:]]+$/'.

outiface: Output interface to filter on. Values must match '/^[a-zA-Z0-9-._+]+$/'. Requires the interface_match feature.
pkttype: Sets the packet type to match. Valid values are: 'unicast', 'broadcast', and'multicast'. Requires the pkttype feature.
port: The destination or source port to match for this filter (if the protocol supports ports). Will accept a single element or an array. For some firewall providers you can pass a range of ports in the format: 'start number-end number'. For example, '1-1024' would cover ports 1 to 1024.
proto: The specific protocol to match for this rule. This is 'tcp' by default. Valid values are:
- 'tcp'
- 'udp'
- 'icmp'
- 'ipv6-icmp'
- 'esp'
- 'ah'
- 'vrrp'
- 'igmp'
- 'ipencap'
- 'ospf'
- 'gre'
- 'all'
provider: The specific backend to use for this firewall resource. You will seldom need to specify this --- Puppet will usually discover the appropriate provider for your platform. Available providers are ip6tables and iptables. See the Providers section above for details about these providers.
random: When using a jump value of 'MASQUERADE', 'DNAT', 'REDIRECT', or 'SNAT', this boolean will enable randomized port mapping. Valid values are 'true', 'false'. Requires the dnat feature.
rdest: If boolean 'true', adds the destination IP address to the list. Valid values are 'true', 'false'. Requires the recent_limiting feature and the recent parameter.
reap: Can only be used in conjunction with the rseconds parameter. If boolean 'true', this will purge entries older than 'seconds' as specified in rseconds. Valid values are 'true', 'false'. Requires the recent_limiting feature and the recent parameter.
recent: Enable the recent module. Valid values are: 'set', 'update', 'rcheck', or 'remove'. For example:

# If anyone's appeared on the 'badguy' blacklist within
# the last 60 seconds, drop their traffic, and update the timestamp.
firewall { '100 Drop badguy traffic':
  recent   => 'update',
  rseconds => 60,
  rsource  => true,
  rname    => 'badguy',
  action   => 'DROP',
  chain    => 'FORWARD',
}
# No-one should be sending us traffic on eth0 from localhost
# Blacklist them
firewall { '101 blacklist strange traffic':
  recent      => 'set',
  rsource     => true,
  rname       => 'badguy',
  destination => '127.0.0.0/8',
  iniface     => 'eth0',
  action      => 'DROP',
  chain       => 'FORWARD',
}

Requires the recent_limiting feature.

reject: When combined with jump => 'REJECT', you can specify a different ICMP response to be sent back to the packet sender. Requires the reject_type feature.
rhitcount: Used in conjunction with recent => 'update' or recent => 'rcheck'. When used, this will narrow the match to happen only when the address is in the list and packets greater than or equal to the given value have been received. Requires the recent_limiting feature and the recent parameter.
rname: Specify the name of the list. Takes a string argument. Requires the recent_limiting feature and the recent parameter.
rseconds: Used in conjunction with recent => 'rcheck' or recent => 'update'. When used, this will narrow the match to only happen when the address is in the list and was seen within the last given number of seconds. Requires the recent_limiting feature and the recent parameter.
rsource: If boolean 'true', adds the source IP address to the list. Valid values are 'true', 'false'. Requires the recent_limiting feature and the recent parameter.
rttl: May only be used in conjunction with recent => 'rcheck' or recent => 'update'. If boolean 'true', this will narrow the match to happen only when the address is in the list and the TTL of the current packet matches that of the packet that hit the recent => 'set' rule. If you have problems with DoS attacks via bogus packets from fake source addresses, this parameter may help. Valid values are 'true', 'false'. Requires the recent_limiting feature and the recent parameter.
set_mark: Set the Netfilter mark value associated with the packet. Accepts either 'mark/mask' or 'mark'. These will be converted to hex if they are not already. Requires the mark feature.
socket: If 'true', matches if an open socket can be found by doing a socket lookup on the packet. Valid values are 'true', 'false'. Requires the socket feature.
source: The source address. For example: source => '192.168.2.0/24'. You can also negate a mask by putting ! in front. For example: source => '! 192.168.2.0/24'. The source can also be an IPv6 address if your provider supports it.
sport: The source port to match for this filter (if the protocol supports ports). Will accept a single element or an array. For some firewall providers you can pass a range of ports in the format:'start number-end number'. For example, '1-1024' would cover ports 1 to 1024.
src_range: The source IP range. For example: src_range => '192.168.1.1-192.168.1.10'. The source IP range is must in 'IP1-IP2' format. Values must match '0.0.0.0-0.0.0.0' through '255.255.255.255-255.255.255.255'. Requires the iprange feature.
src_type: Specify the source address type. For example: src_type => 'LOCAL'.

Valid values are:
- 'UNSPEC': an unspecified address.
- 'UNICAST': a unicast address.
- 'LOCAL': a local address.
- 'BROADCAST': a broadcast address.
- 'ANYCAST': an anycast packet.
- 'MULTICAST': a multicast address.
- 'BLACKHOLE': a blackhole address.
- 'UNREACHABLE': an unreachable address.
- 'PROHIBIT': a prohibited address.
- 'THROW': an unroutable address.
- 'XRESOLVE': an unresolvable address.
Requires the address_type feature.
stat_every: Match one packet every nth packet. Requires stat_mode => 'nth'
stat_mode: Set the matching mode for statistic matching. Supported modes are random and nth.
stat_packet: Set the initial counter value for the nth mode. Must be between 0 and the value of stat_every. Defaults to 0. Requires stat_mode => 'nth'
stat_probability: Set the probability from 0 to 1 for a packet to be randomly matched. It works only with stat_mode => 'random'.
state: Matches a packet based on its state in the firewall stateful inspection table. Valid values are: 'INVALID', 'ESTABLISHED', 'NEW', 'RELATED'. Requires the state_match feature.
table: Table to use. Valid values are: 'nat', 'mangle', 'filter', 'raw', 'rawpost'. By default the setting is 'filter'. Requires the iptables feature.
tcp_flags: Match when the TCP flags are as specified. Set as a string with a list of comma-separated flag names for the mask, then a space, then a comma-separated list of flags that should be set. The flags are: 'SYN', 'ACK', 'FIN', 'RST', 'URG', 'PSH', 'ALL', 'NONE'.

Note that you specify flags in the order that iptables --list rules would list them to avoid having Puppet think you changed the flags. For example, 'FIN,SYN,RST,ACK SYN' matches packets with the SYN bit set and the ACK, RST and FIN bits cleared. Such packets are used to request TCP connection initiation. Requires the tcp_flags feature.
todest: When using jump => 'DNAT', you can specify the new destination address using this parameter. Requires the dnat feature.
toports: For DNAT this is the port that will replace the destination port. Requires the dnat feature.
tosource: When using jump => 'SNAT', you can specify the new source address using this parameter. Requires the snat feature.
uid: UID or Username owner matching rule. Accepts a string argument only, as iptables does not accept multiple uid in a single statement. Requires the owner feature.

###Type: firewallchain

Enables you to manage rule chains for firewalls.

Currently this type supports only iptables, ip6tables, and ebtables on Linux. It also provides support for setting the default policy on chains and tables that allow it.

Autorequires: If Puppet is managing the iptables or iptables-persistent packages, and the provider is iptables_chain, the firewall resource will autorequire those packages to ensure that any required binaries are installed.

####Providers

iptables_chain is the only provider that supports firewallchain.

####Features

iptables_chain: The provider provides iptables chain features.
policy: Default policy (inbuilt chains only).

####Parameters

ensure: Ensures that the resource is present. Valid values are 'present', 'absent'.
ignore: Regex to perform on firewall rules to exempt unmanaged rules from purging (when enabled). This is matched against the output of iptables-save. This can be a single regex or an array of them. To support flags, use the ruby inline flag mechanism: a regex such as /foo/i can be written as (?i)foo or (?i:foo). Only when purge is 'true'.

Full example:
```
firewallchain { 'INPUT:filter:IPv4': 
  purge  => true, 
  ignore => [
     # ignore the fail2ban jump rule
     '-j fail2ban-ssh', 
     # ignore any rules with "ignore" (case insensitive) in the comment in the rule 
     '--comment "[^"](?i:ignore)[^"]"', 
   ],
}
```
name: Specify the canonical name of the chain. For iptables the format must be {chain}:{table}:{protocol}.
policy: Set the action the packet will perform when the end of the chain is reached. It can only be set on inbuilt chains ('INPUT', 'FORWARD', 'OUTPUT', 'PREROUTING', 'POSTROUTING'). Valid values are:
- 'accept': The packet is accepted.
- 'drop': The packet is dropped.
- 'queue': The packet is passed userspace.
- 'return': The packet is returned to calling (jump) queue or to the default of inbuilt chains.
provider: The specific backend to use for this firewallchain resource. You will seldom need to specify this --- Puppet will usually discover the appropriate provider for your platform. The only available provider is:

iptables_chain: iptables chain provider
- Required binaries: ebtables-save, ebtables, ip6tables-save, ip6tables, iptables-save, iptables.
- Default for kernel == linux.
- Supported features: iptables_chain, policy.
purge: Purge unmanaged firewall rules in this chain. Valid values are 'false', 'true'.

###Fact: ip6tables_version

A Facter fact that can be used to determine what the default version of ip6tables is for your operating system/distribution.

###Fact: iptables_version

A Facter fact that can be used to determine what the default version of iptables is for your operating system/distribution.

###Fact: iptables_persistent_version

Retrieves the version of iptables-persistent from your OS. This is a Debian/Ubuntu specific fact.

##Limitations

###SLES

The socket parameter is not supported on SLES. In this release it will cause the catalog to fail with iptables failures, rather than correctly warn you that the features are unusable.

###Oracle Enterprise Linux

The socket and owner parameters are unsupported on Oracle Enterprise Linux when the "Unbreakable" kernel is used. These may function correctly when using the stock RedHat kernel instead. Declaring either of these parameters on an unsupported system will result in iptable rules failing to apply.

###Other

Bugs can be reported using JIRA issues

http://tickets.puppetlabs.com

##Development

Puppet Labs modules on the Puppet Forge are open projects, and community contributions are essential for keeping them great. We can’t access the huge number of platforms and myriad of hardware, software, and deployment configurations that Puppet is intended to serve.

We want to keep it as easy as possible to contribute changes so that our modules work in your environment. There are a few guidelines that we need contributors to follow so that we can have a chance of keeping on top of things.

You can read the complete module contribution guide on the Puppet Labs wiki.

For this particular module, please also read CONTRIBUTING.md before contributing.

Currently we support:

iptables
ip6tables
ebtables (chains only)

###Testing

Make sure you have:

rake
bundler

Install the necessary gems:

bundle install

And run the tests from the root of the source code:

rake test

If you have a copy of Vagrant 1.1.0 you can also run the system tests:

RS_SET=ubuntu-1404-x64 rspec spec/acceptance
RS_SET=centos-64-x64 rspec spec/acceptance

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.markdown

README.markdown

Default firewall rules

Providers

Features

Parameters

Files

README.markdown

Latest commit

History

README.markdown

File metadata and controls

Default firewall rules

Providers

Features

Parameters