YSFprotocol main.h option for default module on connect.

[vk4tux]

The more I test the YSF feature, the more I desire an option in main.h to just connect YSF client connections to a defined module in main.h. I cannot believe this is not possible.

[yo2loj]

I think Luc follows the same paradigm as in DMR, as the system is completely autonomous and self contained.
In DMR, one needs to use 4001 - 4026 to reach a specific module, In YSF, one uses Wires-X commands to connect to a specific module, relying in both cases on the client to do the first move.
But a default module would make a lot of sense, especially for users not familiar with those procedures, or using radios which hide Wires-X, like the FT70 (it seems that Yaesu is phasing out that mode in favor of GM).

[vk4tux]

It could be a sysop advanced option available in main.h. For YSF2DMR bridge this is ideal.

…

On 28/10/19 9:33 pm, Marius Petrescu, YO2LOJ wrote: I think Luc follows the same paradigm as in DMR. The system is completely autonomous and self contained. In DMR, one needs to use 4001 - 4026 to reach a specific module, In YSF, one uses Wires-X commands to connect to a specific module. But a default module would make a lot of sense. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#132?email_source=notifications&email_token=ACCUMYDOILZU3MCXXDCNZ3DQQ3EYXA5CNFSM4JFY32YKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOECMSDCY#issuecomment-546906507>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACCUMYENFH43SD3LSKRIDL3QQ3EYXANCNFSM4JFY32YA>.

[yo2loj]

I would go a step further: Allow to name and register that default module in the YSF registry...
But maybe that is just wishful thinking :-)

[LX1IQ]

Let's wait what the OpenSpot and Pi-star guys are doing.
I'm in touch with Norbert and he will probably add the DTMF command to the OpenSpot2 for a default Linking option to a specified Module.

I think Luc follows the same paradigm as in DMR, as the system is completely autonomous and >self contained.
@ Marius, absolutely.

[LX1IQ]

@ Adrian, setting any default YSF module via the main.h does not make any sense to me, except you would like to link other systems to the XLX without using the XLX Interlink protocol. Like HBlink or what ever.

[PBXForums]

Does anyone know which file to modify to connect to a module by default? This may allow me to connect users until I can find out how to properly select a module. I have an experienced Openspot2 user finding it impossible at the moment.

[LX1IQ]

Install XLX v2.3.2.
This version allows you to define a default YSF module which your clients are linked to.

73, Luc