O2 feasibility?

[zedbrett]

Hey majuss,
thanks for your description.
I am trying to configure it for O2 VDSL, but without any success. I uploaded the firmware and changed everything by using a ssh connctin with putty. Still no connection.

Maybe you have an idea?
Thanks

[majuss]

You need to add an capital "H" at the beginning of your username. You have to google the stuff for details.

[zedbrett]

You mean like this?

ccfg_cli set username@wan050=H<myusername>@s93.bbi-o2.de
ccfg_cli set password@wan050=<mypassword>
ccfg_cli set vlan_id@wan050=7

The only google results for O2 and easybox is this topic and another, where you are helping some guy. It is O2 Germany btw

[majuss]

Yes this is maybe right (no idea, since I can't test it at all you know :D). You don't have to google for the EB google for the manual DSL setup or the setup with a Telekom Speedport. Read for example this thread: https://telekomhilft.telekom.de/t5/forums/v3_1/forumtopicpage/board-id/710/thread-id/686300/page/1 then you maybe find hints for the correct username.

[zedbrett]

Actually I did not find anything about modifying the username (the link is about a LTE problem). My login data are working in a speedport without any problems.
I will give up :D Thank you anyway for sharing your stuff

[majuss]

Any news on that?

[oliverpool]

Hi,

@majuss thank you so much for the guide !

I've been able to have a working DSL connection with O2 germany with the following config (taken from the "Die wichtigsten Informationen"):

ccfg_cli set username@wan050=089********@s93.bbi-o2.de
ccfg_cli set password@wan050=******
ccfg_cli set vlan_id@wan050=7

Interestingly, just after booting, the box is able to connect to the internet (according to http://easy.box ), and then synchronizes the time (via NTP). After that, the internet connexion is reset and it takes about 5 minutes to have a working connexion!

I've not been able to completely set-up SIP for the VOIP (see #20 )