This is a alternative print bed for the BabyCube. It uses the same 120 x 120 x 6 mm aluminium tooling plate that is used on the Voron0.
| Print Bed 3 Point Printed Stage 1 | Print Bed 3 Point Printed | TOTALS | |
|---|---|---|---|
| Vitamins | |||
| . | 1 | 1 | Aluminium tooling plate 120mm x 120mm x 6mm |
| 4 | . | 4 | Bolt M3 caphead x 8mm |
| 4 | . | 4 | Bolt M3 caphead x 35mm |
| . | 3 | 3 | Bolt M3 countersunk x 12mm |
| 4 | . | 4 | Bolt M5 countersunk x 12mm |
| . | 1 | 1 | Cork underlay 120mm x 120mm x 3mm |
| . | 1 | 1 | Heating pad 100mm x 100mm |
| 1 | . | 1 | Leadscrew nut 8 x 2 |
| . | 1 | 1 | Magnetic base 120mm x 120mm |
| . | 9 | 9 | O-ring nitrile 3mm x 2mm |
| 2 | . | 2 | SCS12UU bearing block |
| . | 1 | 1 | Ziptie 2.5mm x 100mm min length |
| 15 | 17 | 32 | Total vitamins count |
| 3D printed parts | |||
| 1 | . | 1 | Printbed_Frame.stl |
| 1 | . | 1 | Total 3D printed parts count |
| Qty | Description |
|---|---|
| 4 | Bolt M3 caphead x 8mm |
| 4 | Bolt M3 caphead x 35mm |
| 4 | Bolt M5 countersunk x 12mm |
| 1 | Leadscrew nut 8 x 2 |
| 2 | SCS12UU bearing block |
| 1 x Printbed_Frame.stl |
|---|
 |
- Bolt the bearing blocks to the sides of the Printbed_Frame.
- Insert the leadnut and bolt it to the Printbed_Frame.
| Qty | Description |
|---|---|
| 1 | Aluminium tooling plate 120mm x 120mm x 6mm |
| 3 | Bolt M3 countersunk x 12mm |
| 1 | Cork underlay 120mm x 120mm x 3mm |
| 1 | Heating pad 100mm x 100mm |
| 1 | Magnetic base 120mm x 120mm |
| 9 | O-ring nitrile 3mm x 2mm |
| 1 | Ziptie 2.5mm x 100mm min length |
| 1 x Print_bed_3_point_printed_stage_1_assembly |
|---|
 |
- Prepare the the cork underlay by cutting it to size, making a cutout for the heated bed wiring, and drilling holes for the bolts.
- Attach the magnetic base to the top side of the aluminium tooling plate.
- Attach the heating pad to the bottom side of the tooling plate.
- Place the cork underlay on the Printbed_Frame and place the tooling plate on top.
- Secure the tooling plate to the Printbed_Frame, using the bolts and O-rings. Note that the O-rings allow bed leveling and help thermally insulate the heated bed from the Printbed_Frame.
- Secure the heating pad wiring to the underside of the Printbed_Frame using a cable tie.