Skip to content

Kext Configuration

Jump to bottom
Mayank Kumar edited this page Sep 15, 2021 · 3 revisions

You can control Kryptonite's behavior using NVRAM boot-args specified either via OpenCore config.plist located in the EFI/OC folder on your bootloader disk or manually.

Supported Flags

Boot Arg Description
-krydisable Disables Kryptonite on boot.
-krydbg Enables debugging for Kryptonite. Must be used alongside -liludbg.
-krybeta Enables Kryptonite on beta/untested versions of macOS. Must be used with -lilubeta.
krygpu= Provide GPU vendor to patch for. Must be AMD or NVDA.
krytbtv= Provide Thunderbolt NHI version. Required for macOS ≤ 10.15. Must be 1 or 2.

If you use the Kryptonite Installer, it will automatically configure the kernel extension according to your system.

"Desultory reading is delightful, but to be beneficial, our reading must be carefully directed." — Seneca

eGPU.io - Twitter - LinkedIn

Message to Users

  • See Pages above for all available topics.
  • Please read all topics carefully.
  • If you have questions, see FAQ first.
  • Reach out for help on egpu.io if required.
Clone this wiki locally