can't run ubuntu or docker with WSL

[thebrahman]

Windows Version

Microsoft Windows [Version 10.0.19045.3448]

WSL Version

WSL version: 2.0.4.0

Are you using WSL 1 or WSL 2?

• WSL 2
• WSL 1

Kernel Version

5.15.123.1-1

Distro Version

No response

Other Software

Docker Desktop 4.24
Ubuntu

Repro Steps

Docker has worked great for a long time, yesterday I installed the VSCODE docker extension and noticed that it didn't work. I then uninstalled the extension, ran docker desktop and it hung on 'starting docker engine'. I am not sure whether it was the VSCODE extension, a docker update, or something else that caused the issue.

At first no wsl commands would work at all, they would hang and do nothing. I tried WSL --install but got The package installation failed because a version of the service exists outside of APPX packaging. Please contact your software vendor.
I completely uninstalled WSL through 'add/rem progs', disabled WSL, then installed the latest 'msixbundle' and re-enabled.

WSL commands work now, I tried installing the newest Ubuntu LTS from 'WSL --list --online', it got most of the way done and then my PC blue-screened. I uninstalled Ubuntu and tried installing and running docker. the logs are below.

I have spent in excess of 10 hours installing and reinstalling different versions, rebooting, turning security settings off and on etc. This is really annoying as i need docker to work, I am very close to just installing docker in a ubuntu VM and never using WSL again.

Expected Behavior

it works like it should.

Actual Behavior

It hangs while 'starting docker engine', logs provided below.

Diagnostic Logs

WSL DEBUG CONSOLE when running docker, it takes a very long time and then errors.

[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI not present or invalid.
[    0.000000] Hypervisor detected: Microsoft Hyper-V
[    0.000000] Hyper-V: privilege flags low 0x2e7f, high 0x3b8030, hints 0x20e24, misc 0x20bed7b6
[    0.000000] Hyper-V Host Build:19041-10.0-3-0.3448
[    0.000000] Hyper-V: Nested features: 0x0
[    0.000000] Hyper-V: LAPIC Timer Frequency: 0x1e8480
[    0.000000] Hyper-V: Using hypercall for remote TLB flush
[    0.000000] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[    0.000001] tsc: Marking TSC unstable due to running on Hyper-V
[    0.001845] tsc: Detected 3600.012 MHz processor
[    0.003246] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.005299] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.007070] last_pfn = 0x404a00 max_arch_pfn = 0x400000000
[    0.008993] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.011282] last_pfn = 0xf8000 max_arch_pfn = 0x400000000
[    0.012989] Using GB pages for direct mapping
[    0.014409] RAMDISK: [mem 0x03dd6000-0x03fd1fff]
[    0.015829] ACPI: Early table checksum verification disabled
[    0.017573] ACPI: RSDP 0x00000000000E0000 000024 (v02 VRTUAL)
[    0.019349] ACPI: XSDT 0x0000000000100000 000044 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[    0.022016] ACPI: FACP 0x0000000000101000 000114 (v06 VRTUAL MICROSFT 00000001 MSFT 00000001)
[    0.024671] ACPI: DSDT 0x00000000001011B8 01E184 (v02 MSFTVM DSDT01   00000001 MSFT 05000000)
[    0.027288] ACPI: FACS 0x0000000000101114 000040
[    0.028730] ACPI: OEM0 0x0000000000101154 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[    0.031376] ACPI: SRAT 0x000000000011F33C 000350 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
[    0.034108] ACPI: APIC 0x000000000011F68C 0000E8 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001)
[    0.036723] ACPI: Reserving FACP table memory at [mem 0x101000-0x101113]
[    0.038778] ACPI: Reserving DSDT table memory at [mem 0x1011b8-0x11f33b]
[    0.040831] ACPI: Reserving FACS table memory at [mem 0x101114-0x101153]
[    0.042873] ACPI: Reserving OEM0 table memory at [mem 0x101154-0x1011b7]
[    0.044913] ACPI: Reserving SRAT table memory at [mem 0x11f33c-0x11f68b]
[    0.046955] ACPI: Reserving APIC table memory at [mem 0x11f68c-0x11f773]
[    0.049172] Zone ranges:
[    0.049946]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.051812]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.053773]   Normal   [mem 0x0000000100000000-0x00000004049fffff]
[    0.055713]   Device   empty
[    0.056583] Movable zone start for each node
[    0.057909] Early memory node ranges
[    0.059014]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.060980]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
[    0.062915]   node   0: [mem 0x0000000100000000-0x00000004049fffff]
[    0.064888] Initmem setup node 0 [mem 0x0000000000001000-0x00000004049fffff]
[    0.067222] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.067239] On node 0, zone DMA: 352 pages in unavailable ranges
[    0.078128] On node 0, zone Normal: 13824 pages in unavailable ranges
[    0.080010] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.083892] IOAPIC[0]: apic_id 20, version 17, address 0xfec00000, GSI 0-23
[    0.086022] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.088046] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.089987] smpboot: Allowing 20 CPUs, 0 hotplug CPUs
[    0.091549] [mem 0xf8000000-0xffffffff] available for PCI devices
[    0.093456] Booting paravirtualized kernel on Hyper-V
[    0.094976] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.102117] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:20 nr_node_ids:1
[    0.105209] percpu: Embedded 53 pages/cpu s177624 r8192 d31272 u262144
[    0.107201] pcpu-alloc: s177624 r8192 d31272 u262144 alloc=1*2097152
[    0.109107] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.111338] pcpu-alloc: [0] 16 17 18 19 -- -- -- --
[    0.112850] Hyper-V: PV spinlocks enabled
[    0.114077] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.116296] Built 1 zonelists, mobility grouping on.  Total pages: 4114141
[    0.118414] Kernel command line: initrd=\initrd.img WSL_ROOT_INIT=1 panic=-1 nr_cpus=20 bonding.max_bonds=0 dummy.numdummies=0 fb_tunnels=none swiotlb=force earlycon=uart8250,io,0x3f8,115200 console=hvc0 debug pty.legacy_count=0
[    0.124652] Unknown kernel command line parameters "WSL_ROOT_INIT=1", will be passed to user space.
[    0.127379] printk: log_buf_len individual max cpu contribution: 4096 bytes
[    0.129514] printk: log_buf_len total cpu_extra contributions: 77824 bytes
[    0.131595] printk: log_buf_len min size: 131072 bytes
[    0.133211] printk: log_buf_len: 262144 bytes
[    0.134552] printk: early log buf free: 124976(95%)
[    0.137672] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.140989] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.143562] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.166355] Memory: 4124428K/16720508K available (18452K kernel code, 2631K rwdata, 9732K rodata, 2012K init, 1780K bss, 404204K reserved, 0K cma-reserved)
[    0.171188] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1
[    0.173487] ftrace: allocating 53204 entries in 208 pages
[    0.193762] ftrace: allocated 208 pages with 3 groups
[    0.195630] rcu: Hierarchical RCU implementation.
[    0.197180] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=20.
[    0.199294]  Rude variant of Tasks RCU enabled.
[    0.200681]  Tracing variant of Tasks RCU enabled.
[    0.202172] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.204536] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=20
[    0.209687] Using NULL legacy PIC
[    0.210738] NR_IRQS: 16640, nr_irqs: 584, preallocated irqs: 0
[    0.212850] random: crng init done
[    0.214041] Console: colour dummy device 80x25
[    0.215518] ACPI: Core revision 20210730
[    0.216857] Failed to register legacy timer interrupt
[    0.218449] APIC: Switch to symmetric I/O mode setup
[    0.220018] Switched APIC routing to physical flat.
[    0.221615] Hyper-V: Using IPI hypercalls
[    0.223051] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.02 BogoMIPS (lpj=36000120)
[    0.226682] pid_max: default: 32768 minimum: 301
[    0.228389] LSM: Security Framework initializing
[    0.230080] landlock: Up and running.
[    0.231410] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.233048] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.233048] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.233048] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.233048] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.233048] Spectre V2 : Mitigation: Enhanced IBRS
[    0.233048] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.233048] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT
[    0.233048] RETBleed: Mitigation: Enhanced IBRS
[    0.233048] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.233048] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.233048] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.233048] SRBDS: Unknown: Dependent on hypervisor status
[    0.233048] Freeing SMP alternatives memory: 60K
[    0.233048] smpboot: CPU0: Intel(R) Core(TM) i9-10850K CPU @ 3.60GHz (family: 0x6, model: 0xa5, stepping: 0x5)
[    0.233048] Performance Events: Skylake events, full-width counters, Intel PMU driver.
[    0.233048] ... version:                4
[    0.233048] ... bit width:              48
[    0.233048] ... generic registers:      4
[    0.233053] ... value mask:             0000ffffffffffff
[    0.234851] ... max period:             00007fffffffffff
[    0.236726] ... fixed-purpose events:   3
[    0.238286] ... event mask:             000000070000000f
[    0.240429] rcu: Hierarchical SRCU implementation.
[    0.242368] smp: Bringing up secondary CPUs ...
[    0.243124] x86: Booting SMP configuration:
[    0.244488] .... node  #0, CPUs:        #1
[    0.244906] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
[    0.250474]   #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19
[    0.253556] smp: Brought up 1 node, 20 CPUs
[    0.263053] smpboot: Max logical packages: 1
[    0.264483] smpboot: Total of 20 processors activated (144000.48 BogoMIPS)
[    0.284311] node 0 deferred pages initialised in 20ms
[    0.285116] devtmpfs: initialized
[    0.285116] x86/mm: Memory block size: 128MB
[    0.285879] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.293055] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.295608] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.297493] audit: initializing netlink subsys (disabled)
[    0.299195] audit: type=2000 audit(1696476685.070:1): state=initialized audit_enabled=0 res=1
[    0.299195] thermal_sys: Registered thermal governor 'step_wise'
[    0.299195] cpuidle: using governor menu
[    0.299195] ACPI: bus type PCI registered
[    0.299195] PCI: Fatal: No config space access function found
[    0.300118] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.303092] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.305188] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.313092] raid6: skip pq benchmark and using algorithm avx2x4
[    0.314972] raid6: using avx2x2 recovery algorithm
[    0.314972] ACPI: Added _OSI(Module Device)
[    0.314972] ACPI: Added _OSI(Processor Device)
[    0.315773] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.317272] ACPI: Added _OSI(Processor Aggregator Device)
[    0.318946] ACPI: Added _OSI(Linux-Dell-Video)
[    0.320325] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.322002] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.335885] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.338513] ACPI: Interpreter enabled
[    0.338513] ACPI: PM: (supports S0 S5)
[    0.338513] ACPI: Using IOAPIC for interrupt routing
[    0.343102] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.346130] ACPI: Enabled 1 GPEs in block 00 to 0F
[    0.348253] iommu: Default domain type: Translated
[    0.349834] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.351846] SCSI subsystem initialized
[    0.353052] ACPI: bus type USB registered
[    0.354442] usbcore: registered new interface driver usbfs
[    0.356402] usbcore: registered new interface driver hub
[    0.358469] usbcore: registered new device driver usb
[    0.360411] pps_core: LinuxPPS API ver. 1 registered
[    0.362335] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.363069] PTP clock support registered
[    0.364440] hv_vmbus: Vmbus version:5.2
[    0.364471] PCI: Using ACPI for IRQ routing
[    0.365906] PCI: System does not support PCI
[    0.367456] clocksource: Switched to clocksource hyperv_clocksource_tsc_page
[    0.368496] hv_vmbus: Unknown GUID: c376c1c3-d276-48d2-90a9-c04748072c60
[    0.368954] hv_vmbus: Unknown GUID: 6e382d18-3336-4f4b-acc4-2b7703d4df4a
[    0.371132] hv_vmbus: Unknown GUID: dde9cbc0-5060-4436-9448-ea1254a5d177
[    0.373850] VFS: Disk quotas dquot_6.6.0
[    0.375232] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.377502] FS-Cache: Loaded
[    0.378445] pnp: PnP ACPI init
[    0.379536] pnp: PnP ACPI: found 3 devices
[    0.384124] NET: Registered PF_INET protocol family
[    0.386055] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.389773] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.392660] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.395286] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.398242] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.401131] TCP: Hash tables configured (established 131072 bind 65536)
[    0.403342] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.405654] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.408294] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.410387] RPC: Registered named UNIX socket transport module.
[    0.412417] RPC: Registered udp transport module.
[    0.414043] RPC: Registered tcp transport module.
[    0.415677] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.417931] PCI: CLS 0 bytes, default 64
[    0.419178] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.419220] Trying to unpack rootfs image as initramfs...
[    0.421420] software IO TLB: mapped [mem 0x00000000f4000000-0x00000000f8000000] (64MB)
[    0.425843] kvm: no hardware support
[    0.425894] Freeing initrd memory: 2032K
[    0.426949] has_svm: not amd or hygon
[    0.429322] kvm: no hardware support
[    0.432028] Initialise system trusted keyrings
[    0.433479] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[    0.436203] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.438156] NFS: Registering the id_resolver key type
[    0.439871] Key type id_resolver registered
[    0.441158] Key type id_legacy registered
[    0.442386] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.444447] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.446726] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.449610] Key type cifs.idmap registered
[    0.451044] fuse: init (API version 7.34)
[    0.452473] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[    0.455785] 9p: Installing v9fs 9p2000 file system support
[    0.457762] FS-Cache: Netfs '9p' registered for caching
[    0.459572] FS-Cache: Netfs 'ceph' registered for caching
[    0.461341] ceph: loaded (mds proto 32)
[    0.467512] NET: Registered PF_ALG protocol family
[    0.469101] xor: automatically using best checksumming function   avx
[    0.471447] Key type asymmetric registered
[    0.472855] Asymmetric key parser 'x509' registered
[    0.474696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.478491] hv_vmbus: registering driver hv_pci
[    0.480539] hv_pci 29bdaeb0-4c11-430f-921c-054cc64f9abd: PCI VMBus probing: Using version 0x10003
[    0.484099] hv_pci 29bdaeb0-4c11-430f-921c-054cc64f9abd: PCI host bridge to bus 4c11:00
[    0.486626] pci_bus 4c11:00: root bus resource [mem 0x9ffe00000-0x9ffe02fff window]
[    0.489002] pci_bus 4c11:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.492023] pci 4c11:00:00.0: [1af4:1043] type 00 class 0x010000
[    0.494547] pci 4c11:00:00.0: reg 0x10: [mem 0x9ffe00000-0x9ffe00fff 64bit]
[    0.497185] pci 4c11:00:00.0: reg 0x18: [mem 0x9ffe01000-0x9ffe01fff 64bit]
[    0.499734] pci 4c11:00:00.0: reg 0x20: [mem 0x9ffe02000-0x9ffe02fff 64bit]
[    0.503914] pci_bus 4c11:00: busn_res: [bus 00-ff] end is updated to 00
[    0.506116] pci 4c11:00:00.0: BAR 0: assigned [mem 0x9ffe00000-0x9ffe00fff 64bit]
[    0.509137] pci 4c11:00:00.0: BAR 2: assigned [mem 0x9ffe01000-0x9ffe01fff 64bit]
[    0.512208] pci 4c11:00:00.0: BAR 4: assigned [mem 0x9ffe02000-0x9ffe02fff 64bit]
[    0.515658] hv_pci b2ace963-2f17-40ab-840f-9fc6d6b60191: PCI VMBus probing: Using version 0x10003
[    0.519831] hv_pci b2ace963-2f17-40ab-840f-9fc6d6b60191: PCI host bridge to bus 2f17:00
[    0.522987] pci_bus 2f17:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.526333] pci 2f17:00:00.0: [1414:008e] type 00 class 0x030200
[    0.531969] pci_bus 2f17:00: busn_res: [bus 00-ff] end is updated to 00
[    0.534530] hv_pci 7ff20c4f-7e66-4f6d-83f8-4753ffdd59e4: PCI VMBus probing: Using version 0x10003
[    0.538094] hv_pci 7ff20c4f-7e66-4f6d-83f8-4753ffdd59e4: PCI host bridge to bus 7e66:00
[    0.540994] pci_bus 7e66:00: root bus resource [mem 0x9ffe04000-0x9ffe06fff window]
[    0.543777] pci_bus 7e66:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.547338] pci 7e66:00:00.0: [1af4:1049] type 00 class 0x010000
[    0.550194] pci 7e66:00:00.0: reg 0x10: [mem 0x9ffe04000-0x9ffe04fff 64bit]
[    0.553123] pci 7e66:00:00.0: reg 0x18: [mem 0x9ffe05000-0x9ffe05fff 64bit]
[    0.555908] pci 7e66:00:00.0: reg 0x20: [mem 0x9ffe06000-0x9ffe06fff 64bit]
[    0.560736] pci_bus 7e66:00: busn_res: [bus 00-ff] end is updated to 00
[    0.562923] pci 7e66:00:00.0: BAR 0: assigned [mem 0x9ffe04000-0x9ffe04fff 64bit]
[    0.566039] pci 7e66:00:00.0: BAR 2: assigned [mem 0x9ffe05000-0x9ffe05fff 64bit]
[    0.569130] pci 7e66:00:00.0: BAR 4: assigned [mem 0x9ffe06000-0x9ffe06fff 64bit]
[    0.577940] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.580451] 00:00: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.583257] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.608642] Non-volatile memory driver v1.3
[    0.610069] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[    0.612068] printk: console [hvc0] enabled
[    0.613331] printk: bootconsole [uart8250] disabled
[    0.617980] brd: module loaded
[    0.618750] loop: module loaded
[    0.618937] hv_vmbus: registering driver hv_storvsc
[    0.619196] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    0.619500] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    0.619839] tun: Universal TUN/TAP device driver, 1.6
[    0.620164] PPP generic driver version 2.4.2
[    0.620441] PPP BSD Compression module registered
[    0.620624] scsi host0: storvsc_host_t
[    0.620661] PPP Deflate Compression module registered
[    0.621005] PPP MPPE Compression module registered
[    0.621212] NET: Registered PF_PPPOX protocol family
[    0.621441] usbcore: registered new interface driver cdc_ether
[    0.621707] usbcore: registered new interface driver cdc_ncm
[    0.621983] usbcore: registered new interface driver r8153_ecm
[    0.622262] hv_vmbus: registering driver hv_netvsc
[    0.622568] VFIO - User Level meta-driver version: 0.3
[    0.622877] usbcore: registered new interface driver cdc_acm
[    0.623107] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.623421] usbcore: registered new interface driver ch341
[    0.623603] usbserial: USB Serial support registered for ch341-uart
[    0.623831] usbcore: registered new interface driver cp210x
[    0.624030] usbserial: USB Serial support registered for cp210x
[    0.624269] usbcore: registered new interface driver ftdi_sio
[    0.624486] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.624911] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[    0.625167] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 1
[    0.625474] vhci_hcd: created sysfs vhci_hcd.0
[    0.625823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
[    0.626129] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.626584] usb usb1: Product: USB/IP Virtual Host Controller
[    0.626877] usb usb1: Manufacturer: Linux 5.15.123.1-microsoft-standard-WSL2 vhci_hcd
[    0.627221] usb usb1: SerialNumber: vhci_hcd.0
[    0.627563] hub 1-0:1.0: USB hub found
[    0.627774] hub 1-0:1.0: 8 ports detected
[    0.629186] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
[    0.629840] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2
[    0.630541] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.631093] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
[    0.631456] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.631818] usb usb2: Product: USB/IP Virtual Host Controller
[    0.632115] usb usb2: Manufacturer: Linux 5.15.123.1-microsoft-standard-WSL2 vhci_hcd
[    0.632452] usb usb2: SerialNumber: vhci_hcd.0
[    0.632788] hub 2-0:1.0: USB hub found
[    0.632981] hub 2-0:1.0: 8 ports detected
[    0.633403] hv_vmbus: registering driver hyperv_keyboard
[    0.633646] rtc_cmos 00:02: RTC can wake from S4
[    0.635082] rtc_cmos 00:02: registered as rtc0
[    0.635541] rtc_cmos 00:02: setting system clock to 2023-10-05T03:31:25 UTC (1696476685)
[    0.635922] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram
[    0.636331] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.636757] device-mapper: raid: Loading target version 1.15.1
[    0.637006] usbcore: registered new interface driver usbhid
[    0.637208] usbhid: USB HID core driver
[    0.637392] hv_utils: Registering HyperV Utility Driver
[    0.637568] hv_vmbus: registering driver hv_utils
[    0.637771] hv_vmbus: registering driver hv_balloon
[    0.637993] hv_utils: TimeSync IC version 4.0
[    0.638030] hv_vmbus: registering driver dxgkrnl
[    0.638372] hv_balloon: Using Dynamic Memory protocol version 2.0
[    0.638991] drop_monitor: Initializing network drop monitor service
[    0.639288] Mirror/redirect action on
[    0.639460] Free page reporting enabled
[    0.639461] hv_balloon: Cold memory discard hint enabled with order 9
[    0.639839] u32 classifier
[    0.639934]     Performance counters on
[    0.640065]     input device check on
[    0.640216]     Actions configured
[    0.640976] IPVS: Registered protocols (TCP, UDP)
[    0.641240] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[    0.641646] IPVS: ipvs loaded.
[    0.641853] IPVS: [rr] scheduler registered.
[    0.642125] IPVS: [wrr] scheduler registered.
[    0.642370] IPVS: [sh] scheduler registered.
[    0.642614] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    0.642832] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[    0.643083] Initializing XFRM netlink socket
[    0.643311] NET: Registered PF_INET6 protocol family
[    0.643819] Segment Routing with IPv6
[    0.643974] In-situ OAM (IOAM) with IPv6
[    0.644144] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.644415] NET: Registered PF_PACKET protocol family
[    0.644630] Bridge firewalling registered
[    0.644772] 8021q: 802.1Q VLAN Support v1.8
[    0.644932] sctp: Hash tables configured (bind 256/256)
[    0.645158] 9pnet: Installing 9P2000 support
[    0.657595] Key type dns_resolver registered
[    0.657943] Key type ceph registered
[    0.658282] libceph: loaded (mon/osd proto 15/24)
[    0.658570] NET: Registered PF_VSOCK protocol family
[    0.658779] hv_vmbus: registering driver hv_sock
[    0.659031] IPI shorthand broadcast: enabled
[    0.659260] sched_clock: Marking stable (648354000, 10204000)->(731989700, -73431700)
[    0.660116] registered taskstats version 1
[    0.661013] Loading compiled-in X.509 certificates
[    0.663679] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.664892] Freeing unused kernel image (initmem) memory: 2012K
[    0.710269] Write protecting the kernel read-only data: 30720k
[    0.711153] Freeing unused kernel image (text/rodata gap) memory: 2024K
[    0.711667] Freeing unused kernel image (rodata/data gap) memory: 508K
[    0.711945] Run /init as init process
[    0.712095]   with arguments:
[    0.712267]     /init
[    0.712371]   with environment:
[    0.712535]     HOME=/
[    0.712637]     TERM=linux
[    0.712747]     WSL_ROOT_INIT=1
[    0.719238] scsi 0:0:0:0: Direct-Access     Msft     Virtual Disk     1.0  PQ: 0 ANSI: 5
[    0.727512] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.728019] sd 0:0:0:0: [sda] 797632 512-byte logical blocks: (408 MB/389 MiB)
[    0.728464] sd 0:0:0:0: [sda] Write Protect is on
[    0.728715] sd 0:0:0:0: [sda] Mode Sense: 0f 00 80 00
[    0.729097] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    0.731395] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.733026] EXT4-fs (sda): mounted filesystem without journal. Opts: (null). Quota mode: none.
GNS: Processing Next Message
Processing LX_GNS_MESSAGE_TYPE LxGnsMessageInterfaceConfiguration
OpenAdapterImpl: Found an interface matching the GUID 7FDED2EA-7D59-40F1-8799-D4998B073DF2, with name eth0
LxGnsMessageInterfaceConfiguration: no-op - the endpoint ID 7FDED2EA-7D59-40F1-8799-D4998B073DF2 PortFriendlyName is blank
SetAdapterConfiguration setting the IPv4 address on endpointID (7FDED2EA-7D59-40F1-8799-D4998B073DF2) to 172.29.21.179/20 on interfaceName eth0
SetInterfaceState: setting interface state to Up on interfaceName eth0
[    1.540875] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
GNS: Processing Next Message Successful (0x0)
Returning LxGnsMessageResult [0 - ]
GNS: Processing Next Message
Processing LX_GNS_MESSAGE_TYPE LxGnsMessageNotification
OpenAdapterImpl: Found an interface matching the GUID 7FDED2EA-7D59-40F1-8799-D4998B073DF2, with name eth0
Processing Notification LxGnsMessageNotification GuestEndpointResourceType::Route for interfaceName eth0
ProcessRouteChange: Add route default  via 172.29.16.1/0 dev 2 metric 0 on interfaceName eth0
ModifyDefaultRouteImpl - SendMessage Route (to [empty], via 172.29.16.1), operation (RTM_NEWROUTE ), netLinkflags (NLM_F_CREATE )
ModifyDefaultRouteImpl - InitializeAddressAttribute RTA_DST ([not set]) RTA_GATEWAY ([empty]), RTA_PRIORITY (0)
GNS: Processing Next Message Successful (0x0)
Returning LxGnsMessageResult [0 - ]
GNS: Processing Next Message
Processing LX_GNS_MESSAGE_TYPE LxGnsMessageNotification
OpenAdapterImpl: Found an interface matching the GUID 7FDED2EA-7D59-40F1-8799-D4998B073DF2, with name eth0
Processing Notification LxGnsMessageNotification GuestEndpointResourceType::DNS for interfaceName eth0
ProcessDNSChange: setting DNS server domain to : # This file was automatically generated by WSL. To stop automatic generation of this file, add the following entry to /etc/wsl.conf:
# [network]
# generateResolvConf = false
nameserver 172.29.16.1
 on interfaceName eth0
GNS: Processing Next Message Successful (0x0)
Returning LxGnsMessageResult [0 - ]
GNS: Processing Next Message
Processing LX_GNS_MESSAGE_TYPE LxGnsMessageNotification
OpenAdapterImpl: Found an interface matching the GUID 7FDED2EA-7D59-40F1-8799-D4998B073DF2, with name eth0
Processing Notification LxGnsMessageNotification GuestEndpointResourceType::Interface for interfaceName eth0
ProcessLinkChange: setting link state to InterfaceState::Up on interfaceName eth0
SetInterfaceState: setting interface state to Up on interfaceName eth0
ProcessLinkChange: Setting MTU to 1500 on interfaceName eth0
GNS: Processing Next Message Successful (0x0)
Returning LxGnsMessageResult [0 - ]
GNS: Processing Next Message
[    1.636372] hv_pci c29b2ec4-9d5f-4cf0-a704-9e7d0d918d42: PCI VMBus probing: Using version 0x10003
[    1.638005] hv_pci c29b2ec4-9d5f-4cf0-a704-9e7d0d918d42: PCI host bridge to bus 9d5f:00
[    1.638367] pci_bus 9d5f:00: root bus resource [mem 0xc00000000-0xe00001fff window]
[    1.638805] pci_bus 9d5f:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.639882] pci 9d5f:00:00.0: [1af4:105a] type 00 class 0x088000
[    1.642066] pci 9d5f:00:00.0: reg 0x10: [mem 0xe00000000-0xe00000fff 64bit]
[    1.643883] pci 9d5f:00:00.0: reg 0x18: [mem 0xe00001000-0xe00001fff 64bit]
[    1.645817] pci 9d5f:00:00.0: reg 0x20: [mem 0xc00000000-0xdffffffff 64bit]
[    1.649639] pci_bus 9d5f:00: busn_res: [bus 00-ff] end is updated to 00
[    1.649948] pci 9d5f:00:00.0: BAR 4: assigned [mem 0xc00000000-0xdffffffff 64bit]
[    1.651477] pci 9d5f:00:00.0: BAR 0: assigned [mem 0xe00000000-0xe00000fff 64bit]
[    1.653244] pci 9d5f:00:00.0: BAR 2: assigned [mem 0xe00001000-0xe00001fff 64bit]
[    1.665423] virtiofs virtio2: Cache len: 0x200000000 @ 0xc00000000
[    1.721385] memmap_init_zone_device initialised 2097152 pages in 20ms
[    1.727285] FS-Cache: Duplicate cookie detected
[    1.727545] FS-Cache: O-cookie c=00000004 [p=00000002 fl=222 nc=0 na=1]
[    1.727829] FS-Cache: O-cookie d=0000000004a49303{9P.session} n=00000000f5cfec83
[    1.728233] FS-Cache: O-key=[10] '34323934393337343435'
[    1.728474] FS-Cache: N-cookie c=00000005 [p=00000002 fl=2 nc=0 na=1]
[    1.728745] FS-Cache: N-cookie d=0000000004a49303{9P.session} n=000000000a5d0d61
[    1.729068] FS-Cache: N-key=[10] '34323934393337343435'
[    1.780370] scsi 0:0:0:1: Direct-Access     Msft     Virtual Disk     1.0  PQ: 0 ANSI: 5
[    1.791216] sd 0:0:0:1: Attached scsi generic sg1 type 0
[    1.791821] sd 0:0:0:1: [sdb] 2147483648 512-byte logical blocks: (1.10 TB/1.00 TiB)
[    1.792146] sd 0:0:0:1: [sdb] 4096-byte physical blocks
[    1.792404] sd 0:0:0:1: [sdb] Write Protect is off
[    1.792608] sd 0:0:0:1: [sdb] Mode Sense: 0f 00 00 00
[    1.792903] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.794627] sd 0:0:0:1: [sdb] Attached SCSI disk
mke2fs 1.46.5 (30-Dec-2021)
Discarding device blocks: done
Creating filesystem with 268435456 4k blocks and 67108864 inodes
Filesystem UUID: 5553caf0-62fc-427f-a385-eaa26378fd04
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
        102400000, 214990848

Allocating group tables: done
Writing inode tables: done
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: done

[    1.965802] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro,data=ordered. Quota mode: none.
[    2.498009] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro,data=ordered. Quota mode: none.
Processing LX_GNS_MESSAGE_TYPE LxGnsMessageConnectTestRequest
CheckConnection: resolving the name www.msftconnecttest.com [AF_INET]
CheckConnection: connecting to 123.253.149.144
CheckConnection: resolving the name www.msftconnecttest.com [AF_INET6]
Exception: CheckConnection: getaddrinfo() failed: -2 - Name does not resolve
CheckConnection: arming select for 5 seconds
CheckConnection: v4 succeeded
CheckConnection: returning v4 (1) v6 (2)
LxGnsMessageConnectTestRequest (destination: www.msftconnecttest.com) returning: 0x20001
GNS: Processing Next Message Successful (0x20001)
Returning LxGnsMessageResult [131073 - ]
GNS: Processing Next Message
[   49.484532] hv_balloon: Max. dynamic memory size: 16330 MB
[  150.724146] mini_init (242): drop_caches: 1
[  364.130650] /sbin/ldconfig:
[  364.130652] /usr/lib/wsl/lib/libcuda.so.1 is not a symbolic link
[  364.131099]
[  364.242852] hv_pci caa5efd5-ee87-4aea-a6a0-e0f1f718baa9: PCI VMBus probing: Using version 0x10003
[  364.243342] 9pnet_virtio: no channels available for device drvfs
[  364.243669] WSL (1) WARNING: mount: waiting for virtio device drvfs
[  364.244191] hv_pci caa5efd5-ee87-4aea-a6a0-e0f1f718baa9: PCI host bridge to bus ee87:00
[  364.244527] pci_bus ee87:00: root bus resource [mem 0x9ffe08000-0x9ffe0afff window]
[  364.244834] pci_bus ee87:00: No busn resource found for root bus, will use [bus 00-ff]
[  364.245686] pci ee87:00:00.0: [1af4:1049] type 00 class 0x010000
[  364.246480] pci ee87:00:00.0: reg 0x10: [mem 0x9ffe08000-0x9ffe08fff 64bit]
[  364.247087] pci ee87:00:00.0: reg 0x18: [mem 0x9ffe09000-0x9ffe09fff 64bit]
[  364.247714] pci ee87:00:00.0: reg 0x20: [mem 0x9ffe0a000-0x9ffe0afff 64bit]
[  364.250268] pci_bus ee87:00: busn_res: [bus 00-ff] end is updated to 00
[  364.250478] pci ee87:00:00.0: BAR 0: assigned [mem 0x9ffe08000-0x9ffe08fff 64bit]
[  364.251008] pci ee87:00:00.0: BAR 2: assigned [mem 0x9ffe09000-0x9ffe09fff 64bit]
[  364.251530] pci ee87:00:00.0: BAR 4: assigned [mem 0x9ffe0a000-0x9ffe0afff 64bit]
[  364.348831] hv_pci 66035159-46bb-4ada-94d0-f5efe777b38c: PCI VMBus probing: Using version 0x10003
[  364.350829] hv_pci 66035159-46bb-4ada-94d0-f5efe777b38c: PCI host bridge to bus 46bb:00
[  364.351347] pci_bus 46bb:00: root bus resource [mem 0x9ffe0c000-0x9ffe0efff window]
[  364.351741] pci_bus 46bb:00: No busn resource found for root bus, will use [bus 00-ff]
[  364.352611] pci 46bb:00:00.0: [1af4:1049] type 00 class 0x010000
[  364.353428] pci 46bb:00:00.0: reg 0x10: [mem 0x9ffe0c000-0x9ffe0cfff 64bit]
[  364.354084] pci 46bb:00:00.0: reg 0x18: [mem 0x9ffe0d000-0x9ffe0dfff 64bit]
[  364.354788] pci 46bb:00:00.0: reg 0x20: [mem 0x9ffe0e000-0x9ffe0efff 64bit]
[  364.357342] pci_bus 46bb:00: busn_res: [bus 00-ff] end is updated to 00
[  364.357570] pci 46bb:00:00.0: BAR 0: assigned [mem 0x9ffe0c000-0x9ffe0cfff 64bit]
[  364.358108] pci 46bb:00:00.0: BAR 2: assigned [mem 0x9ffe0d000-0x9ffe0dfff 64bit]
[  364.358646] pci 46bb:00:00.0: BAR 4: assigned [mem 0x9ffe0e000-0x9ffe0efff 64bit]
[  364.516294] misc dxg: dxgk: dxgkio_query_statistics: Ioctl failed: -22
[ 1063.378185] WSL (1) ERROR: ConfigApplyWindowsLibPath:2536: open /etc/ld.so.conf.d/ld.wsl.conf
[ 1063.378186]  failed 2
[ 1063.386472] hv_pci b6b2400d-becd-4f79-9765-4a50c458258e: PCI VMBus probing: Using version 0x10003
[ 1063.387401] 9pnet_virtio: no channels available for device drvfs
[ 1063.387664] WSL (1) WARNING: mount: waiting for virtio device drvfs
[ 1063.420053] hv_pci b6b2400d-becd-4f79-9765-4a50c458258e: PCI host bridge to bus becd:00
[ 1063.420847] pci_bus becd:00: root bus resource [mem 0xbffe10000-0xbffe12fff window]
[ 1063.421432] pci_bus becd:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1063.422383] pci becd:00:00.0: [1af4:1049] type 00 class 0x010000
[ 1063.423193] pci becd:00:00.0: reg 0x10: [mem 0xbffe10000-0xbffe10fff 64bit]
[ 1063.423819] pci becd:00:00.0: reg 0x18: [mem 0xbffe11000-0xbffe11fff 64bit]
[ 1063.424465] pci becd:00:00.0: reg 0x20: [mem 0xbffe12000-0xbffe12fff 64bit]
[ 1063.427012] pci_bus becd:00: busn_res: [bus 00-ff] end is updated to 00
[ 1063.427219] pci becd:00:00.0: BAR 0: assigned [mem 0xbffe10000-0xbffe10fff 64bit]
[ 1063.427760] pci becd:00:00.0: BAR 2: assigned [mem 0xbffe11000-0xbffe11fff 64bit]
[ 1063.428303] pci becd:00:00.0: BAR 4: assigned [mem 0xbffe12000-0xbffe12fff 64bit]
[ 1063.491905] hv_pci 8bcb37c6-d0e9-41e4-81b3-1011a2e5763f: PCI VMBus probing: Using version 0x10003
[ 1063.500274] WSL (1) WARNING: /usr/share/zoneinfo/Australia/Brisbane not found. Is the tzdata package installed?
[ 1063.525489] hv_pci 8bcb37c6-d0e9-41e4-81b3-1011a2e5763f: PCI host bridge to bus d0e9:00
[ 1063.526119] pci_bus d0e9:00: root bus resource [mem 0xbffe14000-0xbffe16fff window]
[ 1063.526602] pci_bus d0e9:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1063.527457] pci d0e9:00:00.0: [1af4:1049] type 00 class 0x010000
[ 1063.528257] pci d0e9:00:00.0: reg 0x10: [mem 0xbffe14000-0xbffe14fff 64bit]
[ 1063.528871] pci d0e9:00:00.0: reg 0x18: [mem 0xbffe15000-0xbffe15fff 64bit]
[ 1063.529479] pci d0e9:00:00.0: reg 0x20: [mem 0xbffe16000-0xbffe16fff 64bit]
[ 1063.532060] pci_bus d0e9:00: busn_res: [bus 00-ff] end is updated to 00
[ 1063.532459] pci d0e9:00:00.0: BAR 0: assigned [mem 0xbffe14000-0xbffe14fff 64bit]
[ 1063.533150] pci d0e9:00:00.0: BAR 2: assigned [mem 0xbffe15000-0xbffe15fff 64bit]
[ 1063.533716] pci d0e9:00:00.0: BAR 4: assigned [mem 0xbffe16000-0xbffe16fff 64bit]
[ 1063.625783] Exception:
[ 1063.625785] Operation canceled @p9io.cpp:258 (AcceptAsync)
[ 1063.626107]
[ 1063.631868] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[ 1063.632540] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[ 1063.633078] Buffer I/O error on dev sdb, logical block 134184960, lost sync page write
[ 1063.633370] JBD2: Error -5 detected when updating journal superblock for sdb-8.
[ 1063.633622] Aborting journal on device sdb-8.
[ 1063.633779] Buffer I/O error on dev sdb, logical block 134184960, lost sync page write
[ 1063.634017] JBD2: Error -5 detected when updating journal superblock for sdb-8.
[ 1063.634287] EXT4-fs error (device sdb): ext4_put_super:1196: comm weston: Couldn't clean up the journal
[ 1063.634604] EXT4-fs (sdb): Remounting filesystem read-only
[ 1063.710490] sd 0:0:0:1: [sdb] Synchronizing SCSI cache
[ 1066.390585] scsi 0:0:0:1: Direct-Access     Msft     Virtual Disk     1.0  PQ: 0 ANSI: 5
[ 1066.398420] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 1066.398856] sd 0:0:0:1: [sdb] 2147483648 512-byte logical blocks: (1.10 TB/1.00 TiB)
[ 1066.399511] sd 0:0:0:1: [sdb] 4096-byte physical blocks
[ 1066.399866] sd 0:0:0:1: [sdb] Write Protect is off
[ 1066.400158] sd 0:0:0:1: [sdb] Mode Sense: 0f 00 00 00
[ 1066.400477] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1066.401995] sd 0:0:0:1: [sdb] Attached SCSI disk
mke2fs 1.46.5 (30-Dec-2021)
Discarding device blocks: done
Creating filesystem with 268435456 4k blocks and 67108864 inodes
Filesystem UUID: 28cd0ae2-a203-4b53-b151-50ea196973d1
Superblock backups stored on blocks:
        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
        4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
        102400000, 214990848

Allocating group tables: done
Writing inode tables: done
[ 1066.486946] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#703 cmd 0x2a status: scsi 0x0 srb 0x4 hv 0xc00000a1
[ 1066.518778] hv_storvsc fd1d2cbd-ce7c-535c-966b-eb5f811c95f0: tag#1023 cmd 0x2a status: scsi 0x0 srb 0x4 hv 0xc00000a1
Creating journal (262144 blocks): done
Writing superblocks and filesystem accounting information: done

[ 1066.568861] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro,data=ordered. Quota mode: none.
[ 1067.090783] EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: discard,errors=remount-ro,data=ordered. Quota mode: none.
[ 1430.738402] /sbin/ldconfig:
[ 1430.738404] /usr/lib/wsl/lib/libcuda.so.1 is not a symbolic link
[ 1430.738842]
[ 1430.747402] FS-Cache: Duplicate cookie detected
[ 1430.747619] FS-Cache: O-cookie c=00000015 [p=00000002 fl=222 nc=0 na=1]
[ 1430.747863] FS-Cache: O-cookie d=0000000004a49303{9P.session} n=000000002082b9ff
[ 1430.748180] FS-Cache: O-key=[10] '34323935303830333437'
[ 1430.748367] FS-Cache: N-cookie c=00000016 [p=00000002 fl=2 nc=0 na=1]
[ 1430.748567] FS-Cache: N-cookie d=0000000004a49303{9P.session} n=00000000c9115bd6
[ 1430.748811] FS-Cache: N-key=[10] '34323935303830333437'
[ 1430.816082] misc dxg: dxgk: dxgkio_query_statistics: Ioctl failed: -22
[ 1792.556594] WSL (1) ERROR: ConfigApplyWindowsLibPath:2536: open /etc/ld.so.conf.d/ld.wsl.conf
[ 1792.556595]  failed 2
[ 1792.570310] WSL (1) WARNING: /usr/share/zoneinfo/Australia/Brisbane not found. Is the tzdata package installed?

Docker Diagnostics:

[PASS] DD0027: is there available disk space on the host?
[SKIP] DD0028: is there available VM disk space?
[SKIP] DD0002: does the bootloader have virtualization enabled?
[SKIP] DD0018: does the host support virtualization?
[FAIL] DD0001: is the application running? Docker is not running
[SKIP] DD0022: is the Virtual Machine Platform Windows Feature enabled?
[SKIP] DD0021: is the WSL 2 Windows Feature enabled?
[PASS] DD0024: is WSL installed?
[FAIL] DD0025: are WSL distros installed? WSL Distribution docker-desktop-data is missing
[PASS] DD0026: is the WSL LxssManager service running?
[FAIL] DD0029: is the WSL 2 Linux filesystem corrupt? prereq failed: are WSL distros installed?
[FAIL] DD0035: is the VM time synchronized? prereq failed: are WSL distros installed?
[FAIL] DD0017: can a VM be started? prereq failed: are WSL distros installed?
[FAIL] DD0016: is the LinuxKit VM running? prereq failed: is the application running?
[FAIL] DD0011: are the LinuxKit services running? prereq failed: is the LinuxKit VM running?
[FAIL] DD0004: is the Docker engine running? prereq failed: are the LinuxKit services running?
[PASS] DD0015: are the binary symlinks installed?
[FAIL] DD0031: does the Docker API work? prereq failed: is the Docker engine running?
[PASS] DD0013: is the $PATH ok?
[FAIL] DD0003: is the Docker CLI working? prereq failed: is the Docker engine running?
[FAIL] DD0005: is the user in the docker-users group? prereq failed: is the LinuxKit VM running?
[FAIL] DD0038: is the connection to Docker working? prereq failed: is the Docker engine running?
[FAIL] DD0014: are the backend processes running? prereq failed: is the LinuxKit VM running?
[FAIL] DD0007: is the backend responding? prereq failed: are the backend processes running?
[FAIL] DD0008: is the native API responding? prereq failed: is the application running?
[FAIL] DD0009: is the vpnkit API responding? prereq failed: are the backend processes running?
[FAIL] DD0010: is the Docker API proxy responding? prereq failed: are the backend processes running?
[SKIP] DD0006: is the Docker Desktop Service responding?
[FAIL] DD0030: is the image access management authorized? prereq failed: is the Docker engine running?
[PASS] DD0033: does the host have Internet access?
[PASS] DD0002: does the bootloader have virtualization enabled?
[PASS] DD0018: does the host support virtualization?
[WARN] DD0001: is the application running? Docker is not running
[PASS] DD0022: is the Virtual Machine Platform Windows Feature enabled?
[PASS] DD0021: is the WSL 2 Windows Feature enabled?
[PASS] DD0024: is WSL installed?
[WARN] DD0025: are WSL distros installed? WSL Distribution docker-desktop-data is missing
[PASS] DD0026: is the WSL LxssManager service running?
[WARN] DD0029: is the WSL 2 Linux filesystem corrupt? prereq failed: are WSL distros installed?
[WARN] DD0035: is the VM time synchronized? prereq failed: are WSL distros installed?
[WARN] DD0017: can a VM be started? prereq failed: are WSL distros installed?
[WARN] DD0016: is the LinuxKit VM running? prereq failed: is the application running?
[WARN] DD0011: are the LinuxKit services running? prereq failed: is the LinuxKit VM running?
[WARN] DD0004: is the Docker engine running? prereq failed: are the LinuxKit services running?
[PASS] DD0015: are the binary symlinks installed?
[WARN] DD0031: does the Docker API work? prereq failed: is the Docker engine running?
[WARN] DD0032: do Docker networks overlap with host IPs? prereq failed: does the Docker API work?

Please note the following 12 warnings:

1 : The check: is the application running?
    Produced the following warning: Docker is not running

Is the Docker Desktop application running?

2 : The check: are WSL distros installed?
    Produced the following warning: WSL Distribution docker-desktop-data is missing

The Docker engine uses several WSL distributions. Therefore these must be installed.

3 : The check: are WSL distros installed?
    Produced the following warning: WSL Distribution docker-desktop-data is missing

The Docker engine uses several WSL distributions. Therefore these must be installed.

4 : The check: is the WSL 2 Linux filesystem corrupt?
    Produced the following warning: prereq failed: are WSL distros installed?

If the WSL 2 Linux filesystem is corrupt then Docker Desktop cannot start.
There is a known issue fixed in Windows Insider builds which can cause filesystem corruption, see:
https://github.com/microsoft/WSL/issues/5895 .

Try running "wsl --shutdown" to stop your WSL Virtual Machine. When it restarts it will
run a filesystem check and hopefully fix the problem.


5 : The check: are WSL distros installed?
    Produced the following warning: WSL Distribution docker-desktop-data is missing

The Docker engine uses several WSL distributions. Therefore these must be installed.

6 : The check: is the VM time synchronized?
    Produced the following warning: prereq failed: are WSL distros installed?

The VM time must be in sync with the host, otherwise Docker Desktop will not work correctly.

Ensure you are using a modern WSL 2 kernel (see "wsl --update"). If this problem persists,
try manually synchronizing the VM clock with "sudo hwclock -s".

7 : The check: can a VM be started?
    Produced the following warning: prereq failed: are WSL distros installed?

The Docker engine runs inside a Linux VM. Therefore we must be able to start Virtual Machines.

8 : The check: is the LinuxKit VM running?
    Produced the following warning: prereq failed: is the application running?

The Docker engine runs inside a Linux VM. Therefore the VM must be running.

9 : The check: are the LinuxKit services running?
    Produced the following warning: prereq failed: is the LinuxKit VM running?

The Docker engine runs inside a Linux VM as a service. Therefore the services must have started.

10 : The check: is the Docker engine running?
    Produced the following warning: prereq failed: are the LinuxKit services running?

The Docker engine manages all containers and images on the host. Check the dockerd.log to see why it failed to start.

11 : The check: does the Docker API work?
    Produced the following warning: prereq failed: is the Docker engine running?

If the Docker API is not available from the host then Docker Desktop will not work correctly.

12 : The check: do Docker networks overlap with host IPs?
    Produced the following warning: prereq failed: does the Docker API work?

If the subnet used by a Docker network overlaps with an IP used by the host, then containers
won't be able to contact the overlapping IP addresses.

Try configuring the IP address range used by networks: in your docker-compose.yml.
See https://docs.docker.com/compose/compose-file/compose-file-v2/#ipv4_address-ipv6_address


Please investigate the following 2 issues:

1 : The test: is the application running?
    Failed with: Docker is not running

Is the Docker Desktop application running?

2 : The test: are WSL distros installed?
    Failed with: WSL Distribution docker-desktop-data is missing

The Docker engine uses several WSL distributions. Therefore these must be installed.

[OneBlue]

@thebrahman : It looks like you have WSL in a weird state.

Can you try manually installing the latest release ? This should resolve the issue.

[microsoft-github-policy-service]

This issue has been automatically closed since it has not had any author activity for the past 7 days. If you're still experiencing this issue please re-open it.

Thank you!