The Mono Runtime
The Mono runtime implements the ECMA Common Language Infrastructure (CLI). The Mono runtime implements this virtual machine.
If you are interested in the technical aspects of the Mono runtime check the Runtime Documentation.
The runtime offers the following services:
- Code Execution
- Garbage Collection, using one of:
- Precise SGen Garbage Collector
- Conservative Boehm Garbage Collector
- Code Generation
- Exception Handling
- Software-triggered exceptions
- Hardware-triggered exceptions like Floating point exceotions, null reference exceptions
- Operating system interface
- File system IO
- Networking IO
- Access to operating system properties and features
- On Unix systems, Mono.Posix APIs
- Program isolation using Application Domains (AppDomain)
- Thread management:
- Threadpool for user code
- Threadpool for networked IO
- Asynchronous method invocation
- Console access
- Security System
The Mono runtime can be used as a stand-alone process, or it can be embedded into applications
Mono has support for both 32 and 64 bit systems on a number of architectures as well as a number of operating systems.
Supported Operating Systems
- Mac OS X, iPhone OS
- Sun Solaris
- BSD - OpenBSD, FreeBSD, NetBSD
- Microsoft Windows
- Nintendo Wii
- Sony PlayStation 3
Mono has both an optimizing just-in-time (JIT) runtime and a interpreter runtime. The interpreter runtime is far less complex and is primarily used in the early stages before a JIT version for that architecture is constructed. The interpreter is not supported on architectures where the JIT has been ported.
|Supported Architectures||Runtime||Operating system|
|s390, s390x (32 and 64 bits)||JIT||Linux|
|SPARC (32)||JIT||Solaris, Linux|
|PowerPC||JIT||Linux, Mac OSX, Wii, PlayStation 3|
|x86||JIT||Linux, FreeBSD, OpenBSD, NetBSD, Microsoft Windows, Solaris, OS X, Android|
|x86-64: AMD64 and EM64T (64 bit)||JIT||Linux, FreeBSD, OpenBSD, Solaris, OS X|
|IA64 Itanium2 (64 bit)||JIT||Linux|
|ARM: little and big endian||JIT||Linux (both old and new ABI), iPhone, Android|
|Alpha||JIT||not maintained. Linux|
|HPPA||JIT||not maintained Linux|
Note that the Alpha, MIPS, ARM big-endian and HPPA architectures are community-supported and may not be as complete as the other architectures.
Support for SPARC64 works in older versions of Mono, but not in the recent versions.
Packages for most platforms are available from the Downloads page.
To make mono more suitable for some architectures used as embedded systems have a look at the Small footprint page.
Paolo Molaro did a presentation on the current JIT engine and the new JIT engine. You can find his slides here.
We have re-written our JIT compiler. We wanted to support a number of features that were missing: Ahead of Time compilation, simplify porting and have a solid foundation for compiler optimizations.
The idea is to allow developers to pre-compile their code to native code to reduce startup time, and the working set that is used at runtime in the just-in-time compiler.
Although in Mono this has not been a visible problem, we wanted to pro-actively address this problem.
When an assembly (a Mono/.NET executable) is installed in the system, it is then be possible to pre-compile the code, and have the JIT compiler tune the generated code to the particular CPU on which the software is installed.
This is done in the Microsoft.NET world with a tool called ngen.exe.
The code produced by Mono's ahead-of-time compiler is Position Independent Code (PIC) which tends to be a bit slower than regular JITed code, but what you loose in performance with PIC you gain by being able to use all the available optimizations.
To compile your assemblies with this, just run this command:
$ mono -O=all --aot program.exe
The above command will turn on all optimizations (
-O=all) and then instructs Mono to compile the code to native code.
Additionally, if you want to do full static builds (and be able to run without the JIT engine), you can use:
$ mono -O=all --aot --full-aot program.exe
Then you can configure your Mono runtime with --enable-minimal to remove the JIT engine. This is useful on systems that do not support Just-in-Time compilation at the kernel level.
Some features like Reflection.Emit and other forms of dynamic code generation are not support in this scenario.
Notice that for Mono 2.0 generics are not supported when doing full-AOT.
Some optimizations are being planned: OptimizingAOT
Mono also offers bundles. Bundles merge your application, the libraries it uses and the Mono runtime into a single executable image. You can think of bundles as "statically linking mono" into your application.
To do this, you use the "mkbundle" command (see the man page distributed with Mono for more details).
For example, to create a fully static and bundled version of Mono for "hello world", you would:
bash$ mcs hello.cs bash$ mkbundle --static hello.exe -o hello OS is: Linux Note that statically linking the LGPL Mono runtime has more licensing restrictions than dynamically linking. See [Licensing](/docs/faq/licensing/) for details on licensing. Sources: 1 Auto-dependencies: False embedding: /tmp/hello.exe Compiling: as -o temp.o temp.s cc -o helol -Wall `pkg-config --cflags mono` temp.c `pkg-config --libs-only-L mono` -Wl,-Bstatic -lmono -Wl,-Bdynamic `pkg-config --libs-only-l mono | sed -e "s/\-lmono //"` temp.o Done bash$
Of course, you can also just embed the libraries, without the actual Mono runtime, by removing the --static flag.
A downside of the --static flag is that it will trigger the LGPL license requirement in the runtime. If you are planning on using this feature as an obfuscation technique you must obtain a commercial license of Mono; otherwise you should distribute all the components that are necessary to comply with the LGPL with bundles.
The commercial license can be acquired from Xamarin.
Platform for Code Optimizations
Beyond the use of the Mono VM as Just-in-Time compiler, we need to make Mono code generation as efficient as possible.
The design called for a good architecture that would enable various levels of optimizations: some optimizations are better performed on high-level intermediate representations, some on medium-level and some at low-level representations.
Also it should be possible to conditionally turn these on or off. Some optimizations are too expensive to be used in just-in-time compilation scenarios, but these expensive optimizations can be turned on for ahead-of-time compilations or when using profile-guided optimizations on a subset of the executed methods.
We wanted to reduce the effort required to port the Mono code generator to new architectures.
For Mono to gain wide adoption in the UNIX world, it is necessary that the JIT engine works in most of today's commercial hardware platforms.
The new Mono engine now supports both 32 and 64 bit systems and various architectures (See Supported Platforms).
Profiling and Code Coverage
Mono provides a number of profiling tools and code coverage tools.
Mono's support for DTrace is available on Solaris and MacOS X.
Logging runtime events
Mono supports a Global Assembly Cache or GAC. The GAC is used to share libraries between different applications, to keep multiple versions of the same library installed at once and to avoid conflicts over the names of the libraries and they also play an important role in trust and security.
See the Assemblies_and_the_GAC document for more details.
Mono today uses Boehm's GC as its Garbage Collection engine. We are also working on a precise and compacting GC engine specific to Mono.
The GC interface is being isolated to allow for more than one GC engine to be used or for the GC to be tuned for specific tasks.
Mono's use of Boehm GC
We are using the Boehm conservative GC in precise mode.
There are a few areas that the GC scans for pointers to managed objects:
- The heap (where other managed objects are allocated)
- thread stacks and registers
- static data area
- data structures allocated by the runtime
(1) is currently handled in mostly precise mode: almost always the GC will only consider memory words that contain only references to the heap, so there is very little chance of pointer misidentification and hence memory retention as a result. The new GC requires a fully precise mode here, so it will improve things marginally. The details about mostly precise have to do with large objects with sparse bitmaps of references and the handling of multiple appdomains safely.
(2) is always scanned conservatively. This will be true for the new GC, too, at least for the first versions, where I'll have my own share of fun at tracking the bugs that a moving generational GC will expose. Later we'll conservatively scan only the unmanaged part of the stacks.
(3) We already optimized this both with Boehm and the current GC to work in precise mode.
(4) I already optimized this to work in mostly precise mode (ie some data structures are dealt with precisely, others not yet). I'll need to do more work in this area, especially for the new GC, where having pinned objects can be a significant source of pain.
Garbage collection list and FAQ: http://www.iecc.com/gclist/
"A Generational Mostly-concurrent Garbage Collector":
Details on The Microsoft .NET Garbage Collection Implementation:
IO and threading
The ECMA runtime and the .NET runtime assume an IO model and a threading model that is very similar to the Win32 API.
Dick Porter has developed WAPI: the Mono abstraction layer that allows our runtime to execute code that depend on this behaviour, this is called the `io-layer' in the Mono source code distribution.
This io-layer offers services like named mutexes that can be shared across multiple processes.
To achieve this, the io-layer uses a shared file mapping across multiple Mono processes to track the state that must be shared across Mono applications in the ~/.wapi directory.
See our Papers section for various articles describing virtual machines and JIT compilers.
See the Porting page for more details on porting Mono to a new platform.
Projects Under Development
There are a number of projects being developed in branches or on separate trees for the runtime, these are:
- Runtime Projects: General Runtime Projects.
- Runtime Requests: Ideas of things that we could use to improve Mono's runtime.
- Compacting GC: A generational, compacting GC for Mono.
- JIT Regalloc: A new register allocation framework.
- Mono_Runtime_API_Changes: Changes that will be introduced in Mono 2.8.
- Continuations: Support for co-routines and continuations in Mono.
- SafeHandles: Support for 2.0 SafeHandles.
- Linear: An update to the JIT's internal representation (IR).
COM and XPCOM
Mono's COM support can be used to interop with system COM components in Windows and in Linux (if you use a COM implementation). Additionally, Mono's COM support can be used to access software based on Mozilla's XPCOM.
For details on the progress, see the COM Interop page.