test_catchup_sanity_blocks_produced is flaky #3139
Assignees
Labels
A-chain
Area: Chain, client & related
Comments
SkidanovAlex
added a commit
that referenced
this issue
Aug 14, 2020
…t the head update, and test fixes Making doomslug wait for 600ms from the last time the node sent an endorsement, not from the head update. Under load this will remove unnecessary idleness. This change breaks catchup tests that do not use doomslug, because they rely on blocks being produced without skips and forks, and without doomslug and the wait not starting from the head update the timing is less predictable. I address it by making the tests actually use doomslug (and upping the block prod times where necessary). Since they rely on having no skips and forks, there's no reason not to use doomslug. For the only test that had two separate versions with and without doomslug, I removed the version without. Separately and unrelatedly to the above, removed backtrace from the formatted client errors. On my (very beefy) machine fetching the backtrace takes 800ms, and on nayduck runners it was more than 2s. Since we format errors in many places (including responces to RPC, though that will change), such delays are not acceptable. This fixes state_sync tests. Fixes: #3139, #3129 Test plan: ---------- For #3139: http://nayduck.eastus.cloudapp.azure.com:3000/#/run/88 For #3129: TODO Catchup tests are split accross many runs, but I ensured they are not flaky after this change.
SkidanovAlex
added a commit
that referenced
this issue
Aug 14, 2020
…t the head update, and test fixes Making doomslug wait for 600ms from the last time the node sent an endorsement, not from the head update. Under load this will remove unnecessary idleness. This change breaks catchup tests that do not use doomslug, because they rely on blocks being produced without skips and forks, and without doomslug and the wait not starting from the head update the timing is less predictable. I address it by making the tests actually use doomslug (and upping the block prod times where necessary). Since they rely on having no skips and forks, there's no reason not to use doomslug. For the only test that had two separate versions with and without doomslug, I removed the version without. Separately and unrelatedly to the above, removed backtrace from the formatted client errors. On my (very beefy) machine fetching the backtrace takes 800ms, and on nayduck runners it was more than 2s. Since we format errors in many places (including responces to RPC, though that will change), such delays are not acceptable. This fixes state_sync tests. Fixes: #3139, #3129 Test plan: ---------- For #3139: http://nayduck.eastus.cloudapp.azure.com:3000/#/run/88 For #3129: (still running, will update the description) Catchup tests are split accross many runs, but I ensured they are not flaky after this change.
bowenwang1996
pushed a commit
that referenced
this issue
Aug 14, 2020
…t the head update, and test fixes (#3164) Making doomslug wait for 600ms from the last time the node sent an endorsement, not from the head update. Under load this will remove unnecessary idleness. This change breaks catchup tests that do not use doomslug, because they rely on blocks being produced without skips and forks, and without doomslug and the wait not starting from the head update the timing is less predictable. I address it by making the tests actually use doomslug (and upping the block prod times where necessary). Since they rely on having no skips and forks, there's no reason not to use doomslug. For the only test that had two separate versions with and without doomslug, I removed the version without. Separately and unrelatedly to the above, removed backtrace from the formatted client errors. On my (very beefy) machine fetching the backtrace takes 800ms, and on nayduck runners it was more than 2s. Since we format errors in many places (including responces to RPC, though that will change), such delays are not acceptable. This fixes state_sync tests. Fixes: #3139, #3129 Test plan: ---------- For #3139: http://nayduck.eastus.cloudapp.azure.com:3000/#/run/88 For #3129: (still running, will update the description) Catchup tests are split accross many runs, but I ensured they are not flaky after this change.
github-merge-queue bot
pushed a commit
that referenced
this issue
Oct 3, 2023
…9630) Bumps [urllib3](https://github.com/urllib3/urllib3) from 1.26.13 to 1.26.17. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/releases">urllib3's releases</a>.</em></p> <blockquote> <h2>1.26.17</h2> <ul> <li>Added the <code>Cookie</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>. (GHSA-v845-jxx5-vc9f)</li> </ul> <h2>1.26.16</h2> <ul> <li>Fixed thread-safety issue where accessing a <code>PoolManager</code> with many distinct origins would cause connection pools to be closed while requests are in progress (<a href="https://redirect.github.com/urllib3/urllib3/issues/2954">#2954</a>)</li> </ul> <h2>1.26.15</h2> <ul> <li>Fix socket timeout value when HTTPConnection is reused (<a href="https://redirect.github.com/urllib3/urllib3/issues/2645">urllib3/urllib3#2645</a>)</li> <li>Remove "!" character from the unreserved characters in IPv6 Zone ID parsing (<a href="https://redirect.github.com/urllib3/urllib3/issues/2899">urllib3/urllib3#2899</a>)</li> <li>Fix IDNA handling of 'x80' byte (<a href="https://redirect.github.com/urllib3/urllib3/issues/2901">urllib3/urllib3#2901</a>)</li> </ul> <h2>1.26.14</h2> <ul> <li>Fixed parsing of port 0 (zero) returning None, instead of 0 (<a href="https://redirect.github.com/urllib3/urllib3/issues/2850">#2850</a>)</li> <li>Removed deprecated <code>HTTPResponse.getheaders()</code> calls in <code>urllib3.contrib</code> module.</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/blob/main/CHANGES.rst">urllib3's changelog</a>.</em></p> <blockquote> <h1>1.26.17 (2023-10-02)</h1> <ul> <li>Added the <code>Cookie</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>. (<code>[#3139](urllib3/urllib3#3139) <https://github.com/urllib3/urllib3/pull/3139></code>_)</li> </ul> <h1>1.26.16 (2023-05-23)</h1> <ul> <li>Fixed thread-safety issue where accessing a <code>PoolManager</code> with many distinct origins would cause connection pools to be closed while requests are in progress (<code>[#2954](urllib3/urllib3#2954) <https://github.com/urllib3/urllib3/pull/2954></code>_)</li> </ul> <h1>1.26.15 (2023-03-10)</h1> <ul> <li>Fix socket timeout value when <code>HTTPConnection</code> is reused (<code>[#2645](urllib3/urllib3#2645) <https://github.com/urllib3/urllib3/issues/2645></code>__)</li> <li>Remove "!" character from the unreserved characters in IPv6 Zone ID parsing (<code>[#2899](urllib3/urllib3#2899) <https://github.com/urllib3/urllib3/issues/2899></code>__)</li> <li>Fix IDNA handling of '\x80' byte (<code>[#2901](urllib3/urllib3#2901) <https://github.com/urllib3/urllib3/issues/2901></code>__)</li> </ul> <h1>1.26.14 (2023-01-11)</h1> <ul> <li>Fixed parsing of port 0 (zero) returning None, instead of 0. (<code>[#2850](urllib3/urllib3#2850) <https://github.com/urllib3/urllib3/issues/2850></code>__)</li> <li>Removed deprecated getheaders() calls in contrib module. Fixed the type hint of <code>PoolKey.key_retries</code> by adding <code>bool</code> to the union. (<code>[#2865](urllib3/urllib3#2865) <https://github.com/urllib3/urllib3/issues/2865></code>__)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/urllib3/urllib3/commit/c9016bf464751a02b7e46f8b86504f47d4238784"><code>c9016bf</code></a> Release 1.26.17</li> <li><a href="https://github.com/urllib3/urllib3/commit/01220354d389cd05474713f8c982d05c9b17aafb"><code>0122035</code></a> Backport GHSA-v845-jxx5-vc9f (<a href="https://redirect.github.com/urllib3/urllib3/issues/3139">#3139</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/e63989f97d206e839ab9170c8a76e3e097cc60e8"><code>e63989f</code></a> Fix installing <code>brotli</code> extra on Python 2.7</li> <li><a href="https://github.com/urllib3/urllib3/commit/2e7a24d08713a0131f0b3c7197889466d645cc49"><code>2e7a24d</code></a> [1.26] Configure OS for RTD to fix building docs</li> <li><a href="https://github.com/urllib3/urllib3/commit/57181d6ea910ac7cb2ff83345d9e5e0eb816a0d0"><code>57181d6</code></a> [1.26] Improve error message when calling urllib3.request() (<a href="https://redirect.github.com/urllib3/urllib3/issues/3058">#3058</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/3c0148048a523325819377b23fc67f8d46afc3aa"><code>3c01480</code></a> [1.26] Run coverage even with failed jobs</li> <li><a href="https://github.com/urllib3/urllib3/commit/d94029b7e2193ff47b627906a70e06377a09aae8"><code>d94029b</code></a> Release 1.26.16</li> <li><a href="https://github.com/urllib3/urllib3/commit/18e92145e9cddbabdf51c98f54202aa37fd5d4c8"><code>18e9214</code></a> Use trusted publishing for PyPI</li> <li><a href="https://github.com/urllib3/urllib3/commit/d25cf83bbae850a290fe34ed1610ae55c0558b36"><code>d25cf83</code></a> [1.26] Fix invalid test_ssl_failure_midway_through_conn</li> <li><a href="https://github.com/urllib3/urllib3/commit/25cca389496b86ee809c21e5b641aeaa74809263"><code>25cca38</code></a> [1.26] Fix test_ssl_object_attributes</li> <li>Additional commits viewable in <a href="https://github.com/urllib3/urllib3/compare/1.26.13...1.26.17">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/near/nearcore/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
nikurt
pushed a commit
that referenced
this issue
Oct 3, 2023
…9630) Bumps [urllib3](https://github.com/urllib3/urllib3) from 1.26.13 to 1.26.17. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/releases">urllib3's releases</a>.</em></p> <blockquote> <h2>1.26.17</h2> <ul> <li>Added the <code>Cookie</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>. (GHSA-v845-jxx5-vc9f)</li> </ul> <h2>1.26.16</h2> <ul> <li>Fixed thread-safety issue where accessing a <code>PoolManager</code> with many distinct origins would cause connection pools to be closed while requests are in progress (<a href="https://redirect.github.com/urllib3/urllib3/issues/2954">#2954</a>)</li> </ul> <h2>1.26.15</h2> <ul> <li>Fix socket timeout value when HTTPConnection is reused (<a href="https://redirect.github.com/urllib3/urllib3/issues/2645">urllib3/urllib3#2645</a>)</li> <li>Remove "!" character from the unreserved characters in IPv6 Zone ID parsing (<a href="https://redirect.github.com/urllib3/urllib3/issues/2899">urllib3/urllib3#2899</a>)</li> <li>Fix IDNA handling of 'x80' byte (<a href="https://redirect.github.com/urllib3/urllib3/issues/2901">urllib3/urllib3#2901</a>)</li> </ul> <h2>1.26.14</h2> <ul> <li>Fixed parsing of port 0 (zero) returning None, instead of 0 (<a href="https://redirect.github.com/urllib3/urllib3/issues/2850">#2850</a>)</li> <li>Removed deprecated <code>HTTPResponse.getheaders()</code> calls in <code>urllib3.contrib</code> module.</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/blob/main/CHANGES.rst">urllib3's changelog</a>.</em></p> <blockquote> <h1>1.26.17 (2023-10-02)</h1> <ul> <li>Added the <code>Cookie</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>. (<code>[#3139](urllib3/urllib3#3139) <https://github.com/urllib3/urllib3/pull/3139></code>_)</li> </ul> <h1>1.26.16 (2023-05-23)</h1> <ul> <li>Fixed thread-safety issue where accessing a <code>PoolManager</code> with many distinct origins would cause connection pools to be closed while requests are in progress (<code>[#2954](urllib3/urllib3#2954) <https://github.com/urllib3/urllib3/pull/2954></code>_)</li> </ul> <h1>1.26.15 (2023-03-10)</h1> <ul> <li>Fix socket timeout value when <code>HTTPConnection</code> is reused (<code>[#2645](urllib3/urllib3#2645) <https://github.com/urllib3/urllib3/issues/2645></code>__)</li> <li>Remove "!" character from the unreserved characters in IPv6 Zone ID parsing (<code>[#2899](urllib3/urllib3#2899) <https://github.com/urllib3/urllib3/issues/2899></code>__)</li> <li>Fix IDNA handling of '\x80' byte (<code>[#2901](urllib3/urllib3#2901) <https://github.com/urllib3/urllib3/issues/2901></code>__)</li> </ul> <h1>1.26.14 (2023-01-11)</h1> <ul> <li>Fixed parsing of port 0 (zero) returning None, instead of 0. (<code>[#2850](urllib3/urllib3#2850) <https://github.com/urllib3/urllib3/issues/2850></code>__)</li> <li>Removed deprecated getheaders() calls in contrib module. Fixed the type hint of <code>PoolKey.key_retries</code> by adding <code>bool</code> to the union. (<code>[#2865](urllib3/urllib3#2865) <https://github.com/urllib3/urllib3/issues/2865></code>__)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/urllib3/urllib3/commit/c9016bf464751a02b7e46f8b86504f47d4238784"><code>c9016bf</code></a> Release 1.26.17</li> <li><a href="https://github.com/urllib3/urllib3/commit/01220354d389cd05474713f8c982d05c9b17aafb"><code>0122035</code></a> Backport GHSA-v845-jxx5-vc9f (<a href="https://redirect.github.com/urllib3/urllib3/issues/3139">#3139</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/e63989f97d206e839ab9170c8a76e3e097cc60e8"><code>e63989f</code></a> Fix installing <code>brotli</code> extra on Python 2.7</li> <li><a href="https://github.com/urllib3/urllib3/commit/2e7a24d08713a0131f0b3c7197889466d645cc49"><code>2e7a24d</code></a> [1.26] Configure OS for RTD to fix building docs</li> <li><a href="https://github.com/urllib3/urllib3/commit/57181d6ea910ac7cb2ff83345d9e5e0eb816a0d0"><code>57181d6</code></a> [1.26] Improve error message when calling urllib3.request() (<a href="https://redirect.github.com/urllib3/urllib3/issues/3058">#3058</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/3c0148048a523325819377b23fc67f8d46afc3aa"><code>3c01480</code></a> [1.26] Run coverage even with failed jobs</li> <li><a href="https://github.com/urllib3/urllib3/commit/d94029b7e2193ff47b627906a70e06377a09aae8"><code>d94029b</code></a> Release 1.26.16</li> <li><a href="https://github.com/urllib3/urllib3/commit/18e92145e9cddbabdf51c98f54202aa37fd5d4c8"><code>18e9214</code></a> Use trusted publishing for PyPI</li> <li><a href="https://github.com/urllib3/urllib3/commit/d25cf83bbae850a290fe34ed1610ae55c0558b36"><code>d25cf83</code></a> [1.26] Fix invalid test_ssl_failure_midway_through_conn</li> <li><a href="https://github.com/urllib3/urllib3/commit/25cca389496b86ee809c21e5b641aeaa74809263"><code>25cca38</code></a> [1.26] Fix test_ssl_object_attributes</li> <li>Additional commits viewable in <a href="https://github.com/urllib3/urllib3/compare/1.26.13...1.26.17">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/near/nearcore/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
nikurt
pushed a commit
that referenced
this issue
Oct 11, 2023
…9630) Bumps [urllib3](https://github.com/urllib3/urllib3) from 1.26.13 to 1.26.17. <details> <summary>Release notes</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/releases">urllib3's releases</a>.</em></p> <blockquote> <h2>1.26.17</h2> <ul> <li>Added the <code>Cookie</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>. (GHSA-v845-jxx5-vc9f)</li> </ul> <h2>1.26.16</h2> <ul> <li>Fixed thread-safety issue where accessing a <code>PoolManager</code> with many distinct origins would cause connection pools to be closed while requests are in progress (<a href="https://redirect.github.com/urllib3/urllib3/issues/2954">#2954</a>)</li> </ul> <h2>1.26.15</h2> <ul> <li>Fix socket timeout value when HTTPConnection is reused (<a href="https://redirect.github.com/urllib3/urllib3/issues/2645">urllib3/urllib3#2645</a>)</li> <li>Remove "!" character from the unreserved characters in IPv6 Zone ID parsing (<a href="https://redirect.github.com/urllib3/urllib3/issues/2899">urllib3/urllib3#2899</a>)</li> <li>Fix IDNA handling of 'x80' byte (<a href="https://redirect.github.com/urllib3/urllib3/issues/2901">urllib3/urllib3#2901</a>)</li> </ul> <h2>1.26.14</h2> <ul> <li>Fixed parsing of port 0 (zero) returning None, instead of 0 (<a href="https://redirect.github.com/urllib3/urllib3/issues/2850">#2850</a>)</li> <li>Removed deprecated <code>HTTPResponse.getheaders()</code> calls in <code>urllib3.contrib</code> module.</li> </ul> </blockquote> </details> <details> <summary>Changelog</summary> <p><em>Sourced from <a href="https://github.com/urllib3/urllib3/blob/main/CHANGES.rst">urllib3's changelog</a>.</em></p> <blockquote> <h1>1.26.17 (2023-10-02)</h1> <ul> <li>Added the <code>Cookie</code> header to the list of headers to strip from requests when redirecting to a different host. As before, different headers can be set via <code>Retry.remove_headers_on_redirect</code>. (<code>[#3139](urllib3/urllib3#3139) <https://github.com/urllib3/urllib3/pull/3139></code>_)</li> </ul> <h1>1.26.16 (2023-05-23)</h1> <ul> <li>Fixed thread-safety issue where accessing a <code>PoolManager</code> with many distinct origins would cause connection pools to be closed while requests are in progress (<code>[#2954](urllib3/urllib3#2954) <https://github.com/urllib3/urllib3/pull/2954></code>_)</li> </ul> <h1>1.26.15 (2023-03-10)</h1> <ul> <li>Fix socket timeout value when <code>HTTPConnection</code> is reused (<code>[#2645](urllib3/urllib3#2645) <https://github.com/urllib3/urllib3/issues/2645></code>__)</li> <li>Remove "!" character from the unreserved characters in IPv6 Zone ID parsing (<code>[#2899](urllib3/urllib3#2899) <https://github.com/urllib3/urllib3/issues/2899></code>__)</li> <li>Fix IDNA handling of '\x80' byte (<code>[#2901](urllib3/urllib3#2901) <https://github.com/urllib3/urllib3/issues/2901></code>__)</li> </ul> <h1>1.26.14 (2023-01-11)</h1> <ul> <li>Fixed parsing of port 0 (zero) returning None, instead of 0. (<code>[#2850](urllib3/urllib3#2850) <https://github.com/urllib3/urllib3/issues/2850></code>__)</li> <li>Removed deprecated getheaders() calls in contrib module. Fixed the type hint of <code>PoolKey.key_retries</code> by adding <code>bool</code> to the union. (<code>[#2865](urllib3/urllib3#2865) <https://github.com/urllib3/urllib3/issues/2865></code>__)</li> </ul> </blockquote> </details> <details> <summary>Commits</summary> <ul> <li><a href="https://github.com/urllib3/urllib3/commit/c9016bf464751a02b7e46f8b86504f47d4238784"><code>c9016bf</code></a> Release 1.26.17</li> <li><a href="https://github.com/urllib3/urllib3/commit/01220354d389cd05474713f8c982d05c9b17aafb"><code>0122035</code></a> Backport GHSA-v845-jxx5-vc9f (<a href="https://redirect.github.com/urllib3/urllib3/issues/3139">#3139</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/e63989f97d206e839ab9170c8a76e3e097cc60e8"><code>e63989f</code></a> Fix installing <code>brotli</code> extra on Python 2.7</li> <li><a href="https://github.com/urllib3/urllib3/commit/2e7a24d08713a0131f0b3c7197889466d645cc49"><code>2e7a24d</code></a> [1.26] Configure OS for RTD to fix building docs</li> <li><a href="https://github.com/urllib3/urllib3/commit/57181d6ea910ac7cb2ff83345d9e5e0eb816a0d0"><code>57181d6</code></a> [1.26] Improve error message when calling urllib3.request() (<a href="https://redirect.github.com/urllib3/urllib3/issues/3058">#3058</a>)</li> <li><a href="https://github.com/urllib3/urllib3/commit/3c0148048a523325819377b23fc67f8d46afc3aa"><code>3c01480</code></a> [1.26] Run coverage even with failed jobs</li> <li><a href="https://github.com/urllib3/urllib3/commit/d94029b7e2193ff47b627906a70e06377a09aae8"><code>d94029b</code></a> Release 1.26.16</li> <li><a href="https://github.com/urllib3/urllib3/commit/18e92145e9cddbabdf51c98f54202aa37fd5d4c8"><code>18e9214</code></a> Use trusted publishing for PyPI</li> <li><a href="https://github.com/urllib3/urllib3/commit/d25cf83bbae850a290fe34ed1610ae55c0558b36"><code>d25cf83</code></a> [1.26] Fix invalid test_ssl_failure_midway_through_conn</li> <li><a href="https://github.com/urllib3/urllib3/commit/25cca389496b86ee809c21e5b641aeaa74809263"><code>25cca38</code></a> [1.26] Fix test_ssl_object_attributes</li> <li>Additional commits viewable in <a href="https://github.com/urllib3/urllib3/compare/1.26.13...1.26.17">compare view</a></li> </ul> </details> <br /> [](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores) Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`. [//]: # (dependabot-automerge-start) [//]: # (dependabot-automerge-end) --- <details> <summary>Dependabot commands and options</summary> <br /> You can trigger Dependabot actions by commenting on this PR: - `@dependabot rebase` will rebase this PR - `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it - `@dependabot merge` will merge this PR after your CI passes on it - `@dependabot squash and merge` will squash and merge this PR after your CI passes on it - `@dependabot cancel merge` will cancel a previously requested merge and block automerging - `@dependabot reopen` will reopen this PR if it is closed - `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually - `@dependabot show <dependency name> ignore conditions` will show all of the ignore conditions of the specified dependency - `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) - `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) You can disable automated security fix PRs for this repo from the [Security Alerts page](https://github.com/near/nearcore/network/alerts). </details> Signed-off-by: dependabot[bot] <support@github.com> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Fails skipping block at height 10, e.g.
http://52.149.162.182:3000/#/test/7535
Same for the
test_catchup_sanity_blocks_produced_doomslug:http://52.149.162.182:3000/#/test/7178
The text was updated successfully, but these errors were encountered: