Reader troubleshooting

[bernardpaulus]

Nope! It detects the reader.

Note that, in pcsc terminology, a "card" is something like the ship inside the reader

This is my output

Scanning present readers...
0: ACS ACR122U PICC Interface 00 00

Sun Nov  6 14:37:44 2011
 Reader 0: ACS ACR122U PICC Interface 00 00
  Card state: Card inserted, 
  ATR: 3B BE 95 00 00 41 03 00 00 00 00 00 00 00 00 00 02 90 00

ATR: 3B BE 95 00 00 41 03 00 00 00 00 00 00 00 00 00 02 90 00
+ TS = 3B --> Direct Convention
+ T0 = BE, Y(1): 1011, K: 14 (historical bytes)
  TA(1) = 95 --> Fi=512, Di=16, 32 cycles/ETU
    125000 bits/s at 4 MHz, fMax for Fi = 5 MHz => 156250 bits/s
  TB(1) = 00 --> VPP is not electrically connected
  TD(1) = 00 --> Y(i+1) = 0000, Protocol T = 0 
-----
+ Historical bytes: 41 03 00 00 00 00 00 00 00 00 00 02 90 00
  Category indicator byte: 41 (proprietary format)

Possibly identified card (using /usr/share/pcsc/smartcard_list.txt):
3B BE 95 00 00 41 03 00 00 00 00 00 00 00 00 00 02 90 00
    touchatag SAM card

Well, if you're not sure, just fire scriptim with the tag on the reader and try to poll it