-
Notifications
You must be signed in to change notification settings - Fork 621
/
pinmux.c
63 lines (56 loc) · 2.02 KB
/
pinmux.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
/*
* Copyright (c) 2016 Linaro Limited.
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <kernel.h>
#include <device.h>
#include <init.h>
#include <drivers/pinmux.h>
#include <sys/sys_io.h>
#include <pinmux/stm32/pinmux_stm32.h>
/* pin assignments for NUCLEO-F401RE board */
static const struct pin_config pinconf[] = {
#if DT_NODE_HAS_STATUS(DT_NODELABEL(usart1), okay) && CONFIG_SERIAL
{STM32_PIN_PB6, STM32F4_PINMUX_FUNC_PB6_USART1_TX},
{STM32_PIN_PB7, STM32F4_PINMUX_FUNC_PB7_USART1_RX},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(usart2), okay) && CONFIG_SERIAL
{STM32_PIN_PA2, STM32F4_PINMUX_FUNC_PA2_USART2_TX},
{STM32_PIN_PA3, STM32F4_PINMUX_FUNC_PA3_USART2_RX},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(pwm2), okay) && CONFIG_PWM
{STM32_PIN_PA5, STM32F4_PINMUX_FUNC_PA5_PWM2_CH1},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(i2c1), okay) && CONFIG_I2C
{STM32_PIN_PB8, STM32F4_PINMUX_FUNC_PB8_I2C1_SCL},
{STM32_PIN_PB9, STM32F4_PINMUX_FUNC_PB9_I2C1_SDA},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(spi1), okay) && CONFIG_SPI
#ifdef CONFIG_SPI_STM32_USE_HW_SS
{STM32_PIN_PA4, STM32F4_PINMUX_FUNC_PA4_SPI1_NSS},
#endif /* CONFIG_SPI_STM32_USE_HW_SS */
{STM32_PIN_PA5, STM32F4_PINMUX_FUNC_PA5_SPI1_SCK},
{STM32_PIN_PA6, STM32F4_PINMUX_FUNC_PA6_SPI1_MISO},
{STM32_PIN_PA7, STM32F4_PINMUX_FUNC_PA7_SPI1_MOSI},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(spi2), okay) && CONFIG_SPI
#ifdef CONFIG_SPI_STM32_USE_HW_SS
{STM32_PIN_PB12, STM32F4_PINMUX_FUNC_PB12_SPI2_NSS},
#endif /* CONFIG_SPI_STM32_USE_HW_SS */
{STM32_PIN_PB13, STM32F4_PINMUX_FUNC_PB13_SPI2_SCK},
{STM32_PIN_PB14, STM32F4_PINMUX_FUNC_PB14_SPI2_MISO},
{STM32_PIN_PB15, STM32F4_PINMUX_FUNC_PB15_SPI2_MOSI},
#endif
#if DT_NODE_HAS_STATUS(DT_NODELABEL(adc1), okay) && CONFIG_ADC
{STM32_PIN_PA0, STM32F4_PINMUX_FUNC_PA0_ADC123_IN0},
#endif
};
static int pinmux_stm32_init(const struct device *port)
{
ARG_UNUSED(port);
stm32_setup_pins(pinconf, ARRAY_SIZE(pinconf));
return 0;
}
SYS_INIT(pinmux_stm32_init, PRE_KERNEL_1,
CONFIG_PINMUX_STM32_DEVICE_INITIALIZATION_PRIORITY);