Failed to download csghub artifact.

[samchen8008]

(base) samchen@bogon ~ % export SERVER_DOMAIN=172.20.7.104
(base) samchen@bogon ~ % curl -L https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one-CN.yml -o all-in-one-CN.yml
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:46 --:--:-- 0

0 0 0 0 0 0 0 0 --:--:-- 0:01:15 --:--:-- 0
curl: (28) Failed to connect to raw.githubusercontent.com port 443 after 75015 ms: Couldn't connect to server
(base) samchen@bogon ~ %
(base) samchen@bogon ~ %
(base) samchen@bogon ~ % ping raw.githubusercontent.com
PING raw.githubusercontent.com (182.43.124.6): 56 data bytes
64 bytes from 182.43.124.6: icmp_seq=0 ttl=53 time=45.702 ms
64 bytes from 182.43.124.6: icmp_seq=1 ttl=53 time=41.738 ms
64 bytes from 182.43.124.6: icmp_seq=2 ttl=53 time=42.661 ms
64 bytes from 182.43.124.6: icmp_seq=3 ttl=53 time=42.102 ms
64 bytes from 182.43.124.6: icmp_seq=4 ttl=53 time=42.455 ms
64 bytes from 182.43.124.6: icmp_seq=5 ttl=53 time=36.326 ms
64 bytes from 182.43.124.6: icmp_seq=6 ttl=53 time=35.578 ms
64 bytes from 182.43.124.6: icmp_seq=7 ttl=53 time=44.073 ms
^C
--- raw.githubusercontent.com ping statistics ---
8 packets transmitted, 8 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 35.578/41.329/45.702/3.327 ms

[samchen8008]

I just followed the below steps:
快速使用
可使用如下命令快速部署一个CSBHub实例到指定环境。

export SERVER_DOMAIN=[IP Address]
curl -L https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one.yml -o all-in-one.yml
docker compose -f all-in-one.yml up -d
国内用户可选择使用阿里容器镜像服务的部署脚本，加快服务启动，命令如下：

export SERVER_DOMAIN=[IP Address]
curl -L https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one-CN.yml -o all-in-one-CN.yml
docker compose -f all-in-one-CN.yml up -d
部署完毕后，就可以在浏览器上通过http://[IP Address]访问到新部署的CSGHub实例。（初始化管理员账号：admin001/admin001）

详细使用方法可参看使用文档

注意：

SERVER_DOMAIN 为目标主机的IP地址或者域名，请不要使用127.0.0.1或者localhost
当前仅仅支持x86_64架构系统。
使用该all-in-one脚本启动过的实例无法有效持久化用户数据。服务启动后，使用docker compose up命令重新加载服务会出现错误，此时可以选择使用docker compose down -v命令彻底清除实例再重新启动，或者使用完整版一键部署脚本进行服务部署。

[wayneliu0019]

国内从github上拉去文件，这种情况会偶尔发生，有的是因为raw.githubusercontent.com这个域名被污染，通过显式在/etc/hosts指定这个域名的地址来解决。可以尝试使用如下两种方法：

指定IP

到 https://site.ip138.com/ 查询出raw.githubusercontent.com的IP地址，然后配置在主机的/etc/hosts里

设置dns地址

为主机设置8.8.8.8作为dns地址

我测试了5、6个不同的虚拟机，出现了同样的情况，解决方法是：在主机的/etc/resolv.conf中增加 nameserver 8.8.8.8，再此curl就可以了，如下：

直接curl失败：

root@m3:~# curl -L https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one-CN.yml -o all-in-one-CN.yml
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:--  0:00:27 --:--:--     0^C
root@m3:~#
root@m3:~#
root@m3:~# wget  https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one-CN.yml
--2024-01-14 13:39:42--  https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one-CN.yml
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 182.43.124.6
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|182.43.124.6|:443... ^C

增加nameserver 8.8.8.8 dns解析：

root@m3:~# cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.

nameserver 8.8.8.8
nameserver 127.0.0.53
options timeout:2 attempts:3 rotate single-request-reopen

再次执行curl命令成功：

root@m3:~# curl -L https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one-CN.yml -o all-in-one-CN.yml
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  5585  100  5585    0     0   2651      0  0:00:02  0:00:02 --:--:--  2651

@samchen8008

[KinglyWayne]

国内从github上拉去文件，这种情况会偶尔发生，有的是因为raw.githubusercontent.com这个域名被污染，通过显式在/etc/hosts指定这个域名的地址来解决。可以尝试使用如下两种方法：

指定IP

到 https://site.ip138.com/ 查询出raw.githubusercontent.com的IP地址，然后配置在主机的/etc/hosts里

设置dns地址

为主机设置8.8.8.8作为dns地址

我测试了5、6个不同的虚拟机，出现了同样的情况，解决方法是：在主机的/etc/resolv.conf中增加 nameserver 8.8.8.8，再此curl就可以了，如下：

直接curl失败：

root@m3:~# curl -L https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one-CN.yml -o all-in-one-CN.yml
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
  0     0    0     0    0     0      0      0 --:--:--  0:00:27 --:--:--     0^C
root@m3:~#
root@m3:~#
root@m3:~# wget  https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one-CN.yml
--2024-01-14 13:39:42--  https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one-CN.yml
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 182.43.124.6
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|182.43.124.6|:443... ^C

增加nameserver 8.8.8.8 dns解析：

root@m3:~# cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
# 127.0.0.53 is the systemd-resolved stub resolver.
# run "systemd-resolve --status" to see details about the actual nameservers.

nameserver 8.8.8.8
nameserver 127.0.0.53
options timeout:2 attempts:3 rotate single-request-reopen

再次执行curl命令成功：

root@m3:~# curl -L https://raw.githubusercontent.com/OpenCSGs/csghub/main/all-in-one-CN.yml -o all-in-one-CN.yml
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  5585  100  5585    0     0   2651      0  0:00:02  0:00:02 --:--:--  2651

@samchen8008

how about add a alternative file address (such as aliyun s3 public file url) for Chinese user?

[samchen8008]

Better to have some mirrors in China

[wayneliu0019]

Aliyun OSS has been added as a yml file source ， please refer here：https://github.com/OpenCSGs/csghub?tab=readme-ov-file#%E5%BF%AB%E9%80%9F%E4%BD%BF%E7%94%A8

[KinglyWayne]

Docker image mirror and docker-compose file mirror have been added for Chinese users and checked.
Issue closed for now.