Request: Pinnacle USB Drivers

[greatfront7]

I would like to request that drivers & firmware be included in the standard openelec install (or instructions for a relevant add-on) to be able to use a Pinnacle 800e USB TV Stick. The current version of the kernel (from daily builds from the end of december) do not seem to support the device.

http://linuxtv.org/wiki/index.php/Pinnacle_PCTV_HD_Pro_Stick_(800e)

[sraue]

can you paste or aattch a "dmesg" and "lsmod" output from a different linux system where this stick works?

[greatfront7]

DMESG:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-12-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=cc13747e-b7bc-4449-b6b2-97fd8b98045d ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000006ffa0000 - 000000006ffae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006ffae000 - 000000006fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./ION, BIOS 080015 01/07/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x6ffa0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000006ffa0000
[ 0.000000] 0000000000 - 006ffa0000 page 4k
[ 0.000000] kernel direct mapping tables up to 6ffa0000 @ 6fc1d000-6ffa0000
[ 0.000000] RAMDISK: 36632000 - 37311000
[ 0.000000] ACPI: RSDP 00000000000faaa0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000006ffa0000 00040 (v01 010711 RSDT1113 20110107 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000006ffa0200 00084 (v01 010711 FACP1113 20110107 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000006ffa04a0 0711B (v01 A113P A113PD12 00000D12 INTL 20051117)
[ 0.000000] ACPI: FACS 000000006ffae000 00040
[ 0.000000] ACPI: APIC 000000006ffa0390 00080 (v01 010711 APIC1113 20110107 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000006ffa0410 0003C (v01 010711 OEMMCFG 20110107 MSFT 00000097)
[ 0.000000] ACPI: WDRT 000000006ffa0450 00047 (v01 010711 NV-WDRT 20110107 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000006ffae040 00079 (v01 010711 OEMB1113 20110107 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000006ffaa4a0 00038 (v01 010711 OEMHPET0 20110107 MSFT 00000097)
[ 0.000000] ACPI: NVHD 000000006ffae0c0 00284 (v01 010711 NVHDCP 20110107 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000006ffa0000
[ 0.000000] Initmem setup node 0 0000000000000000-000000006ffa0000
[ 0.000000] NODE_DATA [000000006fc18000 - 000000006fc1cfff]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0006ffa0
[ 0.000000] On node 0 totalpages: 458543
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6215 pages used for memmap
[ 0.000000] DMA32 zone: 448345 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88006fb9d000 s79616 r8192 d22784 u110592
[ 0.000000] pcpu-alloc: s79616 r8192 d22784 u110592 alloc=27*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 452267
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=cc13747e-b7bc-4449-b6b2-97fd8b98045d ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1778328k/1834624k available (6104k kernel code, 452k absent, 55844k reserved, 4880k data, 984k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 14680064 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1600.194 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.38 BogoMIPS (lpj=6400776)
[ 0.004022] pid_max: default: 32768 minimum: 301
[ 0.004096] Security Framework initialized
[ 0.004141] AppArmor: AppArmor initialized
[ 0.004145] Yama: becoming mindful.
[ 0.004739] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009219] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010108] Mount-cache hash table entries: 256
[ 0.010469] Initializing cgroup subsys cpuacct
[ 0.010488] Initializing cgroup subsys memory
[ 0.010509] Initializing cgroup subsys devices
[ 0.010516] Initializing cgroup subsys freezer
[ 0.010522] Initializing cgroup subsys net_cls
[ 0.010528] Initializing cgroup subsys blkio
[ 0.010548] Initializing cgroup subsys perf_event
[ 0.010615] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.010622] Disabled fast string operations
[ 0.010632] CPU: Physical Processor ID: 0
[ 0.010637] CPU: Processor Core ID: 0
[ 0.010642] mce: CPU supports 5 MCE banks
[ 0.010659] CPU0: Thermal monitoring enabled (TM1)
[ 0.010668] using mwait in idle threads.
[ 0.013560] ACPI: Core revision 20110413
[ 0.026191] ftrace: allocating 25651 entries in 101 pages
[ 0.028566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.069473] CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
[ 0.072003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.072003] ... version: 3
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] Booting Node 0, Processors #1
[ 0.072003] smpboot cpu 1: start_ip = 9a000
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.008000] Disabled fast string operations
[ 0.164268] #2
[ 0.164274] smpboot cpu 2: start_ip = 9a000
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.008000] Disabled fast string operations
[ 0.256308] #3 Ok.
[ 0.256314] smpboot cpu 3: start_ip = 9a000
[ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended
[ 0.008000] Disabled fast string operations
[ 0.348047] Brought up 4 CPUs
[ 0.348055] Total of 4 processors activated (12800.23 BogoMIPS).
[ 0.350488] devtmpfs: initialized
[ 0.350488] PM: Registering ACPI NVS region at 6ffae000 (270336 bytes)
[ 0.356324] print_constraints: dummy:
[ 0.356398] Time: 20:05:40 Date: 01/22/12
[ 0.356504] NET: Registered protocol family 16
[ 0.356534] Trying to unpack rootfs image as initramfs...
[ 0.356946] ACPI: bus type pci registered
[ 0.357148] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff](base 0xfc000000)
[ 0.357158] PCI: not using MMCONFIG
[ 0.357165] PCI: Using configuration type 1 for base access
[ 0.360259] bio: create slab at 0
[ 0.366558] ACPI: EC: Look up EC in DSDT
[ 0.373190] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.383640] ACPI: Interpreter enabled
[ 0.383654] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.383743] ACPI: Using IOAPIC for interrupt routing
[ 0.383852] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff](base 0xfc000000)
[ 0.388502] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
[ 0.426358] ACPI: No dock devices found.
[ 0.426369] HEST: Table not found.
[ 0.426381] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.427337] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-ff])
[ 0.428279] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.428290] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.428300] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.428309] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.428318] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfbffffff]
[ 0.428327] pci_root PNP0A03:00: host bridge window [mem 0xfe000000-0xfebfffff]
[ 0.428369] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
[ 0.428502] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
[ 0.428688] pci 0000:00:03.0: [10de:0aad] type 0 class 0x000601
[ 0.428709] pci 0000:00:03.0: reg 10: [io 0x4f00-0x4fff]
[ 0.428794] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
[ 0.428920] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
[ 0.428947] pci 0000:00:03.2: reg 10: [io 0x4900-0x493f]
[ 0.428987] pci 0000:00:03.2: reg 20: [io 0x4d00-0x4d3f]
[ 0.429003] pci 0000:00:03.2: reg 24: [io 0x4e00-0x4e3f]
[ 0.429045] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.429058] pci 0000:00:03.2: PME# disabled
[ 0.429092] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
[ 0.429287] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
[ 0.429318] pci 0000:00:03.5: reg 10: [mem 0xfae80000-0xfaefffff]
[ 0.429475] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
[ 0.429500] pci 0000:00:04.0: reg 10: [mem 0xfae7f000-0xfae7ffff]
[ 0.429579] pci 0000:00:04.0: supports D1 D2
[ 0.429587] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.429598] pci 0000:00:04.0: PME# disabled
[ 0.429629] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
[ 0.429657] pci 0000:00:04.1: reg 10: [mem 0xfae7ec00-0xfae7ecff]
[ 0.429739] pci 0000:00:04.1: supports D1 D2
[ 0.429747] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.429757] pci 0000:00:04.1: PME# disabled
[ 0.429800] pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
[ 0.429825] pci 0000:00:06.0: reg 10: [mem 0xfae7d000-0xfae7dfff]
[ 0.429898] pci 0000:00:06.0: supports D1 D2
[ 0.429905] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.429915] pci 0000:00:06.0: PME# disabled
[ 0.429945] pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
[ 0.429972] pci 0000:00:06.1: reg 10: [mem 0xfae7e800-0xfae7e8ff]
[ 0.430053] pci 0000:00:06.1: supports D1 D2
[ 0.430061] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.430071] pci 0000:00:06.1: PME# disabled
[ 0.430114] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
[ 0.430138] pci 0000:00:08.0: reg 10: [mem 0xfae78000-0xfae7bfff]
[ 0.430212] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.430222] pci 0000:00:08.0: PME# disabled
[ 0.430252] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
[ 0.430339] pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
[ 0.430365] pci 0000:00:0a.0: reg 10: [mem 0xfae7c000-0xfae7cfff]
[ 0.430381] pci 0000:00:0a.0: reg 14: [io 0xd080-0xd087]
[ 0.430396] pci 0000:00:0a.0: reg 18: [mem 0xfae7e400-0xfae7e4ff]
[ 0.430412] pci 0000:00:0a.0: reg 1c: [mem 0xfae7e000-0xfae7e00f]
[ 0.430462] pci 0000:00:0a.0: supports D1 D2
[ 0.430470] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.430481] pci 0000:00:0a.0: PME# disabled
[ 0.430521] pci 0000:00:0b.0: [10de:0ab4] type 0 class 0x000101
[ 0.430548] pci 0000:00:0b.0: reg 10: [io 0xd000-0xd007]
[ 0.430564] pci 0000:00:0b.0: reg 14: [io 0xcc00-0xcc03]
[ 0.430579] pci 0000:00:0b.0: reg 18: [io 0xc880-0xc887]
[ 0.430594] pci 0000:00:0b.0: reg 1c: [io 0xc800-0xc803]
[ 0.430609] pci 0000:00:0b.0: reg 20: [io 0xc480-0xc48f]
[ 0.430625] pci 0000:00:0b.0: reg 24: [mem 0xfae76000-0xfae77fff]
[ 0.430727] pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
[ 0.430930] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.430944] pci 0000:00:0c.0: PME# disabled
[ 0.431014] pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
[ 0.431079] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.431089] pci 0000:00:10.0: PME# disabled
[ 0.431169] pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
[ 0.431382] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.431399] pci 0000:00:15.0: PME# disabled
[ 0.431498] pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
[ 0.431700] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.431715] pci 0000:00:16.0: PME# disabled
[ 0.431813] pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
[ 0.432057] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.432074] pci 0000:00:17.0: PME# disabled
[ 0.432176] pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
[ 0.432380] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.432395] pci 0000:00:18.0: PME# disabled
[ 0.432540] pci 0000:00:09.0: PCI bridge to [bus 01-01](subtractive decode)
[ 0.432553] pci 0000:00:09.0: bridge window io 0xf000-0x0000
[ 0.432564] pci 0000:00:09.0: bridge window mem 0xfff00000-0x000fffff
[ 0.432576] pci 0000:00:09.0: bridge window mem 0xfff00000-0x000fffff pref
[ 0.432588] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7](subtractive decode)
[ 0.432598] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff](subtractive decode)
[ 0.432608] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff](subtractive decode)
[ 0.432620] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000dffff](subtractive decode)
[ 0.432631] pci 0000:00:09.0: bridge window [mem 0x80000000-0xfbffffff](subtractive decode)
[ 0.432641] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfebfffff](subtractive decode)
[ 0.432815] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.432839] pci 0000:00:0c.0: bridge window io 0xf000-0x0000
[ 0.432855] pci 0000:00:0c.0: bridge window mem 0xfff00000-0x000fffff
[ 0.432878] pci 0000:00:0c.0: bridge window mem 0xfff00000-0x000fffff pref
[ 0.432948] pci 0000:03:00.0: [10de:087d] type 0 class 0x000300
[ 0.432978] pci 0000:03:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.433002] pci 0000:03:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.433025] pci 0000:03:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
[ 0.433043] pci 0000:03:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.433061] pci 0000:03:00.0: reg 30: [mem 0xfafe0000-0xfaffffff pref]
[ 0.433150] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[ 0.433162] pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
[ 0.433173] pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff]
[ 0.433186] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
[ 0.433387] pci 0000:04:00.0: [168c:002b] type 0 class 0x000280
[ 0.433425] pci 0000:04:00.0: reg 10: [mem 0xfebf0000-0xfebfffff 64bit]
[ 0.433530] pci 0000:04:00.0: supports D1
[ 0.433539] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.433550] pci 0000:04:00.0: PME# disabled
[ 0.440103] pci 0000:00:15.0: PCI bridge to [bus 04-04]
[ 0.440130] pci 0000:00:15.0: bridge window io 0xf000-0x0000
[ 0.440148] pci 0000:00:15.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.440173] pci 0000:00:15.0: bridge window mem 0xfff00000-0x000fffff pref
[ 0.440373] pci 0000:00:16.0: PCI bridge to [bus 05-05]
[ 0.440396] pci 0000:00:16.0: bridge window io 0xf000-0x0000
[ 0.440412] pci 0000:00:16.0: bridge window mem 0xfff00000-0x000fffff
[ 0.440435] pci 0000:00:16.0: bridge window mem 0xfff00000-0x000fffff pref
[ 0.440606] pci 0000:00:17.0: PCI bridge to [bus 06-06]
[ 0.440628] pci 0000:00:17.0: bridge window io 0xf000-0x0000
[ 0.440643] pci 0000:00:17.0: bridge window mem 0xfff00000-0x000fffff
[ 0.440666] pci 0000:00:17.0: bridge window mem 0xfff00000-0x000fffff pref
[ 0.440842] pci 0000:00:18.0: PCI bridge to [bus 07-07]
[ 0.440865] pci 0000:00:18.0: bridge window io 0xf000-0x0000
[ 0.440881] pci 0000:00:18.0: bridge window mem 0xfff00000-0x000fffff
[ 0.440904] pci 0000:00:18.0: bridge window mem 0xfff00000-0x000fffff pref
[ 0.441009] ACPI: PCI Interrupt Routing Table [SB.PCI0._PRT]
[ 0.441545] ACPI: PCI Interrupt Routing Table [SB.PCI0.PBB0._PRT]
[ 0.441737] ACPI: PCI Interrupt Routing Table [SB.PCI0.IXVE._PRT]
[ 0.441856] ACPI: PCI Interrupt Routing Table [SB.PCI0.XVR0._PRT]
[ 0.442042] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P6._PRT]
[ 0.442190] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P7._PRT]
[ 0.442332] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P8._PRT]
[ 0.442497] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P9._PRT]
[ 0.443068] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.443892] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.443900] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.477891] ACPI: PCI Interrupt Link [LNKA](IRQs 16 17 18 19) *0, disabled.
[ 0.478323] ACPI: PCI Interrupt Link [LNKB](IRQs 16 17 18 19) *0, disabled.
[ 0.478756] ACPI: PCI Interrupt Link [LNKC](IRQs 16 17 18 19) *0, disabled.
[ 0.479172] ACPI: PCI Interrupt Link [LNKD](IRQs 16 17 18 19) *0, disabled.
[ 0.479599] ACPI: PCI Interrupt Link [LN0A](IRQs 16 17 18 19) *0, disabled.
[ 0.480059] ACPI: PCI Interrupt Link [LN0B](IRQs 16 17 18 19) *0, disabled.
[ 0.480504] ACPI: PCI Interrupt Link [LN0C](IRQs 16 17 18 19) *0, disabled.
[ 0.480923] ACPI: PCI Interrupt Link [LN0D](IRQs 16 17 18 19) *0, disabled.
[ 0.481350] ACPI: PCI Interrupt Link [LN1A](IRQs 16 17 18 19) *0, disabled.
[ 0.481767] ACPI: PCI Interrupt Link [LN1B](IRQs 16 17 18 19) *0, disabled.
[ 0.482196] ACPI: PCI Interrupt Link [LN1C](IRQs 16 17 18 19) *0, disabled.
[ 0.482619] ACPI: PCI Interrupt Link [LN1D](IRQs 16 17 18 19) *0, disabled.
[ 0.483110] ACPI: PCI Interrupt Link [LN2A](IRQs 16 17 18 19) *0, disabled.
[ 0.483541] ACPI: PCI Interrupt Link [LN2B](IRQs 16 17 18 19) *0, disabled.
[ 0.483996] ACPI: PCI Interrupt Link [LN2C](IRQs 16 17 18 19) *0, disabled.
[ 0.484482] ACPI: PCI Interrupt Link [LN2D](IRQs 16 17 18 19) *0, disabled.
[ 0.484928] ACPI: PCI Interrupt Link [LN3A](IRQs 16 17 18 19) *11
[ 0.485364] ACPI: PCI Interrupt Link [LN3B](IRQs 16 17 18 19) *0, disabled.
[ 0.485800] ACPI: PCI Interrupt Link [LN3C](IRQs 16 17 18 19) *0, disabled.
[ 0.486251] ACPI: PCI Interrupt Link [LN3D](IRQs 16 17 18 19) *0, disabled.
[ 0.486700] ACPI: PCI Interrupt Link [LN4A](IRQs 16 17 18 19) *0, disabled.
[ 0.487168] ACPI: PCI Interrupt Link [LN4B](IRQs 16 17 18 19) *0, disabled.
[ 0.487634] ACPI: PCI Interrupt Link [LN4C](IRQs 16 17 18 19) *0, disabled.
[ 0.488105] ACPI: PCI Interrupt Link [LN4D](IRQs 16 17 18 19) *0, disabled.
[ 0.488559] ACPI: PCI Interrupt Link [LN5A](IRQs 16 17 18 19) *0, disabled.
[ 0.488990] ACPI: PCI Interrupt Link [LN5B](IRQs 16 17 18 19) *0, disabled.
[ 0.489425] ACPI: PCI Interrupt Link [LN5C](IRQs 16 17 18 19) *0, disabled.
[ 0.489859] ACPI: PCI Interrupt Link [LN5D](IRQs 16 17 18 19) *0, disabled.
[ 0.490306] ACPI: PCI Interrupt Link [LN6A](IRQs 16 17 18 19) *0, disabled.
[ 0.490737] ACPI: PCI Interrupt Link [LN6B](IRQs 16 17 18 19) *0, disabled.
[ 0.491190] ACPI: PCI Interrupt Link [LN6C](IRQs 16 17 18 19) *0, disabled.
[ 0.491636] ACPI: PCI Interrupt Link [LN6D](IRQs 16 17 18 19) *0, disabled.
[ 0.492147] ACPI: PCI Interrupt Link [LUB0](IRQs 20 21 22 23) *15
[ 0.492617] ACPI: PCI Interrupt Link [LUB2](IRQs 20 21 22 23) *10
[ 0.493058] ACPI: PCI Interrupt Link [LMAC](IRQs 20 21 22 23) *10
[ 0.493520] ACPI: PCI Interrupt Link [LAZA](IRQs 20 21 22 23) *15
[ 0.493966] ACPI: PCI Interrupt Link [SGRU](IRQs 20 21 22 23) *10
[ 0.494415] ACPI: PCI Interrupt Link [LSMB](IRQs 20 21 22 23) *11
[ 0.494869] ACPI: PCI Interrupt Link [LPMU](IRQs 20 21 22 23) *9
[ 0.495326] ACPI: PCI Interrupt Link [LSA0](IRQs 20 21 22 23) *5
[ 0.495841] ACPI: PCI Interrupt Link [LATA](IRQs 20 21 22 23) *0, disabled.
[ 0.496347] ACPI: PCI Interrupt Link [UB11](IRQs 20 21 22 23) *11
[ 0.496795] ACPI: PCI Interrupt Link [UB12](IRQs 20 21 22 23) *9
[ 0.497248] ACPI: PCI Interrupt Link [LRP0](IRQs 20 21 22 23) *10
[ 0.497702] ACPI: PCI Interrupt Link [LRP1](IRQs 20 21 22 23) *0, disabled.
[ 0.498154] ACPI: PCI Interrupt Link [LRP2](IRQs 20 21 22 23) *0, disabled.
[ 0.498623] ACPI: PCI Interrupt Link [LRP3](IRQs 20 21 22 23) *11
[ 0.499120] ACPI: PCI Interrupt Link [LRP4](IRQs 20 21 22 23) *9
[ 0.499585] ACPI: PCI Interrupt Link [LRP5](IRQs 20 21 22 23) *15
[ 0.500101] ACPI: PCI Interrupt Link [LRP6](IRQs 20 21 22 23) *14
[ 0.500498] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.500510] vgaarb: loaded
[ 0.500516] vgaarb: bridge control possible 0000:03:00.0
[ 0.501212] SCSI subsystem initialized
[ 0.501343] libata version 3.00 loaded.
[ 0.501343] usbcore: registered new interface driver usbfs
[ 0.501343] usbcore: registered new interface driver hub
[ 0.501343] usbcore: registered new device driver usb
[ 0.501343] PCI: Using ACPI for IRQ routing
[ 0.501343] PCI: pci_cache_line_size set to 64 bytes
[ 0.501383] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.501392] reserve RAM buffer: 000000006ffa0000 - 000000006fffffff
[ 0.501751] NetLabel: Initializing
[ 0.501759] NetLabel: domain hash size = 128
[ 0.501764] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.501797] NetLabel: unlabeled traffic allowed by default
[ 0.501955] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.501970] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.501987] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.516133] Switching to clocksource hpet
[ 0.519139] Switched to NOHz mode on CPU #0
[ 0.519230] Switched to NOHz mode on CPU #2
[ 0.519280] Switched to NOHz mode on CPU #3
[ 0.519310] Switched to NOHz mode on CPU #1
[ 0.538193] AppArmor: AppArmor Filesystem Enabled
[ 0.538277] pnp: PnP ACPI init
[ 0.538319] ACPI: bus type pnp registered
[ 0.538709] pnp 00:00: [bus 00-ff]
[ 0.538718] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.538724] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.538730] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.538737] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.538743] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.538749] pnp 00:00: [mem 0x80000000-0xfbffffff window]
[ 0.538756] pnp 00:00: [mem 0xfe000000-0xfebfffff window]
[ 0.538924] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.539123] pnp 00:01: [io 0x03f8-0x03ff]
[ 0.539149] pnp 00:01: [irq 4]
[ 0.539155] pnp 00:01: [dma 0 disabled]
[ 0.539253] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.539291] pnp 00:02: [dma 4]
[ 0.539297] pnp 00:02: [io 0x0000-0x000f]
[ 0.539302] pnp 00:02: [io 0x0081-0x0083]
[ 0.539308] pnp 00:02: [io 0x0087]
[ 0.539313] pnp 00:02: [io 0x0089-0x008b]
[ 0.539318] pnp 00:02: [io 0x008f]
[ 0.539323] pnp 00:02: [io 0x00c0-0x00df]
[ 0.539380] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.539408] pnp 00:03: [io 0x0061]
[ 0.539465] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.539493] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.539508] pnp 00:04: [irq 13]
[ 0.539571] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.541207] pnp 00:05: [mem 0x000d0000-0x000d3fff window]
[ 0.541217] pnp 00:05: [mem 0x000d4000-0x000d7fff window]
[ 0.541223] pnp 00:05: [mem 0x000de000-0x000dffff window]
[ 0.541230] pnp 00:05: [io 0x0010-0x001f]
[ 0.541235] pnp 00:05: [io 0x0022-0x003f]
[ 0.541241] pnp 00:05: [io 0x0044-0x004d]
[ 0.541246] pnp 00:05: [io 0x0050-0x005f]
[ 0.541251] pnp 00:05: [io 0x0062-0x0063]
[ 0.541256] pnp 00:05: [io 0x0065-0x006f]
[ 0.541262] pnp 00:05: [io 0x0072-0x007f]
[ 0.541267] pnp 00:05: [io 0x0080]
[ 0.541279] pnp 00:05: [io 0x0084-0x0086]
[ 0.541284] pnp 00:05: [io 0x0088]
[ 0.541289] pnp 00:05: [io 0x008c-0x008e]
[ 0.541294] pnp 00:05: [io 0x0090-0x009f]
[ 0.541300] pnp 00:05: [io 0x00a2-0x00bf]
[ 0.541305] pnp 00:05: [io 0x00e0-0x00ef]
[ 0.541311] pnp 00:05: [io 0x04d0-0x04d1]
[ 0.541316] pnp 00:05: [io 0x0800-0x080f]
[ 0.541321] pnp 00:05: [io 0x4000-0x407f]
[ 0.541327] pnp 00:05: [io 0x4080-0x40ff]
[ 0.541332] pnp 00:05: [io 0x4400-0x447f]
[ 0.541338] pnp 00:05: [io 0x4480-0x44ff]
[ 0.541343] pnp 00:05: [io 0x4800-0x487f]
[ 0.541348] pnp 00:05: [io 0x4880-0x48ff]
[ 0.541355] pnp 00:05: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.541361] pnp 00:05: [mem 0xfefe2000-0xfefe3fff]
[ 0.541367] pnp 00:05: [mem 0xfefe1000-0xfefe1fff]
[ 0.541372] pnp 00:05: [mem 0xfee01000-0xfeefffff]
[ 0.541556] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.541565] system 00:05: [io 0x0800-0x080f] has been reserved
[ 0.541572] system 00:05: [io 0x4000-0x407f] has been reserved
[ 0.541579] system 00:05: [io 0x4080-0x40ff] has been reserved
[ 0.541586] system 00:05: [io 0x4400-0x447f] has been reserved
[ 0.541593] system 00:05: [io 0x4480-0x44ff] has been reserved
[ 0.541600] system 00:05: [io 0x4800-0x487f] has been reserved
[ 0.541607] system 00:05: [io 0x4880-0x48ff] has been reserved
[ 0.541616] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.541624] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.541631] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.541639] system 00:05: [mem 0xfefe2000-0xfefe3fff] has been reserved
[ 0.541647] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.541655] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.541664] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.541977] pnp 00:06: [mem 0xfed00000-0xfed00fff]
[ 0.541984] pnp 00:06: [irq 2 disabled]
[ 0.542004] pnp 00:06: [irq 8]
[ 0.542070] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.542157] pnp 00:07: [io 0x0070-0x0071]
[ 0.542220] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.542474] pnp 00:08: [io 0x0060]
[ 0.542481] pnp 00:08: [io 0x0064]
[ 0.542487] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.542493] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 0.542606] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.542615] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.542624] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.543052] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.543060] pnp 00:09: [io 0x0a00-0x0a0f]
[ 0.543065] pnp 00:09: [io 0x0a10-0x0a1f]
[ 0.543184] system 00:09: [io 0x0a00-0x0a0f] has been reserved
[ 0.543192] system 00:09: [io 0x0a10-0x0a1f] has been reserved
[ 0.543201] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.543360] pnp 00:0a: [mem 0xfc000000-0xfdffffff]
[ 0.543471] system 00:0a: [mem 0xfc000000-0xfdffffff] has been reserved
[ 0.543481] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.543986] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.543994] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.544050] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.544059] pnp 00:0b: [mem 0x00100000-0x7fffffff]
[ 0.544067] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[ 0.544233] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.544242] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.544250] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.544257] system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.544265] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.544274] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.546513] pnp: PnP ACPI: found 12 devices
[ 0.546519] ACPI: ACPI bus type pnp unregistered
[ 0.555596] PCI: max bus depth: 1 pci_try_num: 2
[ 0.555740] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.555746] pci 0000:00:09.0: bridge window [io disabled]
[ 0.555754] pci 0000:00:09.0: bridge window [mem disabled]
[ 0.555761] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 0.555771] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
[ 0.555776] pci 0000:00:0c.0: bridge window [io disabled]
[ 0.555791] pci 0000:00:0c.0: bridge window [mem disabled]
[ 0.555802] pci 0000:00:0c.0: bridge window [mem pref disabled]
[ 0.555821] pci 0000:00:10.0: PCI bridge to [bus 03-03]
[ 0.555829] pci 0000:00:10.0: bridge window [io 0xe000-0xefff]
[ 0.555837] pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff]
[ 0.555846] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
[ 0.555856] pci 0000:00:15.0: PCI bridge to [bus 04-04]
[ 0.555861] pci 0000:00:15.0: bridge window [io disabled]
[ 0.555876] pci 0000:00:15.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.555888] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.555906] pci 0000:00:16.0: PCI bridge to [bus 05-05]
[ 0.555911] pci 0000:00:16.0: bridge window [io disabled]
[ 0.555925] pci 0000:00:16.0: bridge window [mem disabled]
[ 0.555936] pci 0000:00:16.0: bridge window [mem pref disabled]
[ 0.555955] pci 0000:00:17.0: PCI bridge to [bus 06-06]
[ 0.555959] pci 0000:00:17.0: bridge window [io disabled]
[ 0.555974] pci 0000:00:17.0: bridge window [mem disabled]
[ 0.555985] pci 0000:00:17.0: bridge window [mem pref disabled]
[ 0.556034] pci 0000:00:18.0: PCI bridge to [bus 07-07]
[ 0.556042] pci 0000:00:18.0: bridge window [io disabled]
[ 0.556057] pci 0000:00:18.0: bridge window [mem disabled]
[ 0.556068] pci 0000:00:18.0: bridge window [mem pref disabled]
[ 0.556104] pci 0000:00:09.0: setting latency timer to 64
[ 0.556699] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
[ 0.556742] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
[ 0.556757] pci 0000:00:0c.0: setting latency timer to 64
[ 0.556773] pci 0000:00:10.0: setting latency timer to 64
[ 0.557261] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
[ 0.557283] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
[ 0.557297] pci 0000:00:15.0: setting latency timer to 64
[ 0.557784] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
[ 0.557806] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
[ 0.557820] pci 0000:00:16.0: setting latency timer to 64
[ 0.558308] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
[ 0.558330] pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 20 (level, low) -> IRQ 20
[ 0.558344] pci 0000:00:17.0: setting latency timer to 64
[ 0.558832] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
[ 0.558842] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 23 (level, low) -> IRQ 23
[ 0.558856] pci 0000:00:18.0: setting latency timer to 64
[ 0.558869] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.558875] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.558882] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.558888] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.558895] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfbffffff]
[ 0.558901] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.558909] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.558915] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.558922] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.558928] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.558934] pci_bus 0000:01: resource 8 [mem 0x80000000-0xfbffffff]
[ 0.558941] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
[ 0.558948] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.558954] pci_bus 0000:03: resource 1 [mem 0xfaf00000-0xfbffffff]
[ 0.558961] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf9ffffff 64bit pref]
[ 0.558968] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.559077] NET: Registered protocol family 2
[ 0.559348] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.561421] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.565238] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.566117] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.566125] TCP reno registered
[ 0.566152] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.566201] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.566519] NET: Registered protocol family 1
[ 0.732340] pci 0000:03:00.0: Boot video device
[ 0.732355] PCI: CLS 64 bytes, default 64
[ 0.733390] audit: initializing netlink socket (disabled)
[ 0.733416] type=2000 audit(1327262740.728:1): initialized
[ 0.784254] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.789033] VFS: Disk quotas dquot_6.5.2
[ 0.789186] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.791019] fuse init (API version 7.16)
[ 0.791282] msgmni has been set to 3473
[ 0.792670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.792773] io scheduler noop registered
[ 0.792781] io scheduler deadline registered
[ 0.792907] io scheduler cfq registered (default)
[ 0.793911] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.793981] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.794105] intel_idle: MWAIT substates: 0x10
[ 0.794137] intel_idle: v0.4 model 0x1C
[ 0.794141] intel_idle: lapic_timer_reliable_states 0x2
[ 0.794433] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.794448] ACPI: Power Button [PWRB]
[ 0.794570] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.794580] ACPI: Power Button [PWRF]
[ 0.794655] ACPI: acpi_idle yielding to intel_idle
[ 0.804706] ERST: Table is not found!
[ 0.804950] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.825311] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.059816] Freeing initrd memory: 13180k freed
[ 1.141395] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.142324] Linux agpgart interface v0.103
[ 1.145377] brd: module loaded
[ 1.146768] loop: module loaded
[ 1.147753] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[ 1.147768] pata_acpi 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
[ 1.147826] pata_acpi 0000:00:0b.0: setting latency timer to 64
[ 1.147854] pata_acpi 0000:00:0b.0: PCI INT A disabled
[ 1.148728] Fixed MDIO Bus: probed
[ 1.148791] PPP generic driver version 2.4.2
[ 1.148937] tun: Universal TUN/TAP device driver, 1.6
[ 1.148942] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 1.149185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.149741] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
[ 1.149754] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
[ 1.149791] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.149798] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.149908] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 1.149951] ehci_hcd 0000:00:04.1: debug port 1
[ 1.149965] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 1.150008] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfae7ec00
[ 1.160037] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.160379] hub 1-0:1.0: USB hub found
[ 1.160392] hub 1-0:1.0: 6 ports detected
[ 1.161070] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[ 1.161082] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
[ 1.161116] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 1.161124] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 1.161267] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 1.161313] ehci_hcd 0000:00:06.1: debug port 1
[ 1.161328] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
[ 1.161375] ehci_hcd 0000:00:06.1: irq 20, io mem 0xfae7e800
[ 1.172032] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 1.172348] hub 2-0:1.0: USB hub found
[ 1.172361] hub 2-0:1.0: 6 ports detected
[ 1.172530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.173089] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 1.173101] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 1.173137] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.173145] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.173270] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 1.173331] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfae7f000
[ 1.230306] hub 3-0:1.0: USB hub found
[ 1.230321] hub 3-0:1.0: 6 ports detected
[ 1.230992] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22
[ 1.231004] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 22 (level, low) -> IRQ 22
[ 1.231037] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 1.231045] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.231175] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 1.231233] ohci_hcd 0000:00:06.0: irq 22, io mem 0xfae7d000
[ 1.286329] hub 4-0:1.0: USB hub found
[ 1.286344] hub 4-0:1.0: 6 ports detected
[ 1.286506] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.286701] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.288237] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.288256] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.288574] mousedev: PS/2 mouse device common for all mice
[ 1.288884] rtc_cmos 00:07: RTC can wake from S4
[ 1.289143] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.289208] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.289501] device-mapper: uevent: version 1.0.3
[ 1.289725] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.289883] cpuidle: using governor ladder
[ 1.290118] cpuidle: using governor menu
[ 1.290124] EFI Variables Facility v0.08 2004-May-17
[ 1.290746] TCP cubic registered
[ 1.291094] NET: Registered protocol family 10
[ 1.292357] NET: Registered protocol family 17
[ 1.292410] Registering the dns_resolver key type
[ 1.292758] PM: Hibernation image not present or could not be loaded.
[ 1.292786] registered taskstats version 1
[ 1.311177] Magic number: 12:257:94
[ 1.311406] rtc_cmos 00:07: setting system clock to 2012-01-22 20:05:41 UTC (1327262741)
[ 1.311476] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.311482] EDD information not available.
[ 1.311959] Freeing unused kernel memory: 984k freed
[ 1.312691] Write protecting the kernel read-only data: 10240k
[ 1.313527] Freeing unused kernel memory: 20k freed
[ 1.326790] Freeing unused kernel memory: 1400k freed
[ 1.379600] udevd[87]: starting version 173
[ 1.472206] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.589244] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.590227] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
[ 1.590250] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
[ 1.590267] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.606248] hub 1-1:1.0: USB hub found
[ 1.606446] hub 1-1:1.0: 6 ports detected
[ 1.654558] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:01:2e:2b:ff:51
[ 1.654574] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 1.654676] ahci 0000:00:0b.0: version 3.0
[ 1.654716] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
[ 1.654863] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 1.654884] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 1.655044] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 1.655057] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
[ 1.655072] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.658331] scsi0 : ahci
[ 1.658813] scsi1 : ahci
[ 1.659159] scsi2 : ahci
[ 1.659506] scsi3 : ahci
[ 1.659767] scsi4 : ahci
[ 1.660340] scsi5 : ahci
[ 1.661834] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 40
[ 1.661847] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 40
[ 1.661857] ata3: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76200 irq 40
[ 1.661884] ata4: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76280 irq 40
[ 1.661895] ata5: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76300 irq 40
[ 1.661906] ata6: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76380 irq 40
[ 1.716053] usb 1-2: new high speed USB device number 3 using ehci_hcd
[ 1.732046] Refined TSC clocksource calibration: 1599.992 MHz.
[ 1.732061] Switching to clocksource tsc
[ 1.945187] usb 1-1.2: new low speed USB device number 4 using ehci_hcd
[ 1.980051] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.980090] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.980116] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.980147] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.980173] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.980202] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.989720] ata1.00: ATA-8: SAMSUNG HM161HI, 2AC101C4, max UDMA/133
[ 1.989729] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.999248] ata1.00: configured for UDMA/133
[ 1.999554] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM161HI 2AC1 PQ: 0 ANSI: 5
[ 2.000172] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.000196] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.000391] sd 0:0:0:0: [sda] Write Protect is off
[ 2.000402] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.000493] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.050327] sda: sda1 sda2 < sda5 >
[ 2.051174] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.076609] usbcore: registered new interface driver usbhid
[ 2.076619] usbhid: USB HID core driver
[ 2.087873] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[ 2.088384] logitech 0003:046D:C30A.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:04.1-1.2/input0
[ 2.097955] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input3
[ 2.098495] logitech 0003:046D:C30A.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:04.1-1.2/input1
[ 2.137198] usb 1-1.3: new low speed USB device number 5 using ehci_hcd
[ 2.425698] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.459796] input: HID 0461:4d09 as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
[ 2.460159] generic-usb 0003:0461:4D09.0003: input,hidraw2: USB HID v1.00 Mouse [HID 0461:4d09] on usb-0000:00:04.1-1.3/input0
[ 14.739502] udevd[344]: starting version 173
[ 14.803988] lp: driver loaded but no devices found
[ 14.819392] Adding 1832956k swap on /dev/sda5. Priority:-1 extents:1 across:1832956k
[ 14.877008] i2c i2c-0: nForce2 SMBus adapter at 0x4d00
[ 14.877306] i2c i2c-1: nForce2 SMBus adapter at 0x4e00
[ 15.045237] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 15.047386] wmi: Mapper loaded
[ 15.250096] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.253926] nvidia: module license 'NVIDIA' taints kernel.
[ 15.253938] Disabling lock debugging due to kernel taint
[ 15.305662] cfg80211: Calling CRDA to update world regulatory domain
[ 15.387335] type=1400 audit(1327262755.571:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=573 comm="apparmor_parser"
[ 15.388798] type=1400 audit(1327262755.575:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser"
[ 15.389705] type=1400 audit(1327262755.575:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser"
[ 15.415229] type=1400 audit(1327262755.599:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=596 comm="apparmor_parser"
[ 15.427490] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19
[ 15.427544] ath9k 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19
[ 15.427567] ath9k 0000:04:00.0: setting latency timer to 64
[ 15.479525] ath: EEPROM regdomain: 0x60
[ 15.479536] ath: EEPROM indicates we should expect a direct regpair map
[ 15.479549] ath: Country alpha2 being used: 00
[ 15.479555] ath: Regpair used: 0x60
[ 15.479567] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479577] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479586] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479596] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479604] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479614] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479622] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479632] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479641] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479651] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479659] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479669] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479677] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479687] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479695] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479705] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479713] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479723] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479732] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479741] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479750] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479760] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479768] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479778] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479786] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479796] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.479804] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 15.479814] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.482585] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 15.583096] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 15.588325] Registered led device: ath9k-phy0
[ 15.588362] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000360000, irq=19
[ 16.122357] Linux video capture interface: v2.00
[ 16.131668] em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0, class 0)
[ 16.132063] em28xx #0: chip ID is em2882/em2883
[ 16.133580] IR NEC protocol handler initialized
[ 16.462453] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c
[ 16.462491] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[ 16.462524] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00
[ 16.462556] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 16.462589] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.462620] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.462652] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00
[ 16.462684] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00
[ 16.462717] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03
[ 16.462749] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00
[ 16.462782] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 30 00 37 00 30 00
[ 16.462814] em28xx #0: i2c eeprom b0: 31 00 30 00 31 00 37 00 34 00 37 00 30 00 00 00
[ 16.462846] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.462878] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.462910] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.462942] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.462978] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x89e5a7bf
[ 16.462985] em28xx #0: EEPROM info:
[ 16.462990] em28xx #0: AC97 audio (5 sample rates)
[ 16.462996] em28xx #0: 500mA max power
[ 16.463004] em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a
[ 16.524618] em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17)
[ 16.568892] tvp5150 2-005c: chip found @ 0xb8 (em28xx #0)
[ 16.573478] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20
[ 16.573499] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 20 (level, low) -> IRQ 20
[ 16.574397] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
[ 16.574413] nvidia 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23
[ 16.574439] nvidia 0000:03:00.0: setting latency timer to 64
[ 16.574454] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 16.575111] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011
[ 16.578861] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 16.578880] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 16.579604] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[ 16.579621] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
[ 16.579630] hda_intel: Disabling MSI
[ 16.579702] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 16.658760] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.704094] tvp5150 2-005c: tvp5150am1 detected.
[ 16.731832] type=1400 audit(1327262756.915:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=860 comm="apparmor_parser"
[ 16.735019] type=1400 audit(1327262756.919:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=859 comm="apparmor_parser"
[ 16.744245] type=1400 audit(1327262756.931:8): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=861 comm="apparmor_parser"
[ 16.745536] type=1400 audit(1327262756.931:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=859 comm="apparmor_parser"
[ 16.746452] type=1400 audit(1327262756.931:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=859 comm="apparmor_parser"
[ 16.748446] i2c-core: driver [tuner] using legacy suspend method
[ 16.748456] i2c-core: driver [tuner] using legacy resume method
[ 16.751171] type=1400 audit(1327262756.935:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=858 comm="apparmor_parser"
[ 16.760768] tuner 2-0061: Tuner -1 found with type(s) Radio TV.
[ 16.780553] xc2028 2-0061: creating new instance
[ 16.780565] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 16.811269] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 16.811284] cfg80211: World regulatory domain updated:
[ 16.811290] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.811301] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.811310] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.811318] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.811327] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.811336] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.969801] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 17.052040] xc2028 2-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 17.101474] lirc_dev: IR Remote Control driver registered, major 250
[ 17.112458] init: failsafe main process (759) killed by TERM signal
[ 17.118332] init: apport pre-start process (928) terminated with status 1
[ 17.120843] init: alsa-restore main process (937) terminated with status 19
[ 17.125984] usbcore: registered new interface driver mceusb
[ 17.216619] IR RC5(x) protocol handler initialized
[ 17.218800] init: apport post-stop process (981) terminated with status 1
[ 17.259007] IR RC6 protocol handler initialized
[ 17.265142] IR JVC protocol handler initialized
[ 17.277213] IR Sony protocol handler initialized
[ 17.288574] IR LIRC bridge handler initialized
[ 17.588737] hda_codec: ALC888: BIOS auto-probing.
[ 18.195561] xc2028 2-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 18.211182] xc2028 2-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 18.380154] Registered IR keymap rc-pinnacle-pctv-hd
[ 18.380533] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:04.1/usb1/1-2/rc/rc0/input5
[ 18.380784] rc0: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:04.1/usb1/1-2/rc/rc0
[ 18.381822] em28xx #0: Config register raw data: 0xd0
[ 18.382575] em28xx #0: AC97 vendor ID = 0xffffffff
[ 18.384712] em28xx #0: AC97 features = 0x6a90
[ 18.384722] em28xx #0: Empia 202 AC97 audio processor detected
[ 18.549934] em28xx #0: v4l2 driver version 0.1.2
[ 18.596043] xc2028 2-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 19.038942] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.639569] MTS (4), id 00000000000000ff:
[ 19.639585] xc2028 2-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 19.865910] em28xx #0: V4L2 video device registered as video0
[ 19.865920] em28xx #0: V4L2 VBI device registered as vbi0
[ 19.866754] usbcore: registered new interface driver em28xx
[ 19.866763] em28xx driver loaded
[ 19.875294] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 19.875302] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 19.876090] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 20.087099] xc2028 2-0061: attaching existing instance
[ 20.087110] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 20.087118] em28xx #0: em28xx #0/2: xc3028 attached
[ 20.087126] DVB: registering new adapter (em28xx #0)
[ 20.087136] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[ 20.088868] em28xx #0: Successfully loaded em28xx-dvb
[ 20.088899] Em28xx: Initialized (Em28xx dvb Extension) extension
[ 20.213748] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 20.213758] vesafb: scrolling: redraw
[ 20.213767] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 20.214825] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90003d00000, using 1216k, total 1216k
[ 20.215270] Console: switching to colour frame buffer device 80x30
[ 20.215307] fb0: VESA VGA frame buffer device
[ 20.263893] init: plymouth-splash main process (1385) terminated with status 1
[ 23.584058] xc2028 2-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 24.652049] xc2028 2-0061: Loading firmware for type=D2633 DTV6 ATSC (10030), id 0000000000000000.
[ 27.336041] eth0: no IPv6 routers present
[ 90.540099] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 5356.401709] init: mythtv-backend main process (1389) killed by TERM signal
[ 5466.840036] xc2028 2-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 5467.886819] xc2028 2-0061: Loading firmware for type=D2633 DTV6 ATSC (10030), id 0000000000000000.
[14828.759261] exe (3286): /proc/3286/oom_adj is deprecated, please use /proc/3286/oom_score_adj instead.

[greatfront7]

LSMOD:

Module Size Used by
vesafb 13809 1
lgdt330x 14116 1
em28xx_dvb 18304 24
cxd2820r 29389 1 em28xx_dvb
dvb_core 110616 3 lgdt330x,em28xx_dvb,cxd2820r
em28xx_alsa 13728 0
rc_pinnacle_pctv_hd 12529 0
snd_hda_codec_hdmi 32040 1
snd_hda_codec_realtek 330769 1
ir_lirc_codec 12898 0
ir_sony_decoder 12549 0
ir_jvc_decoder 12546 0
ir_rc6_decoder 12546 0
ir_rc5_decoder 12546 0
mceusb 17906 0
lirc_dev 19204 1 ir_lirc_codec
tuner_xc2028 31235 2
tuner 27428 1
snd_hda_intel 33390 3
snd_hda_codec 104802 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13668 1 snd_hda_codec
tvp5150 22036 1
nvidia 12128043 40
snd_pcm 96755 5 em28xx_alsa,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq_midi 13324 0
joydev 17693 1
snd_rawmidi 30547 1 snd_seq_midi
em28xx 108731 2 em28xx_dvb,em28xx_alsa
v4l2_common 16454 3 tuner,tvp5150,em28xx
videodev 93004 4 tuner,tvp5150,em28xx,v4l2_common
v4l2_compat_ioctl32 17083 1 videodev
videobuf_vmalloc 13589 1 em28xx
ir_nec_decoder 12546 0
snd_seq_midi_event 14899 1 snd_seq_midi
videobuf_core 26390 2 em28xx,videobuf_vmalloc
rc_core 26963 10 rc_pinnacle_pctv_hd,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,mceusb,em28xx,ir_nec_decoder
tveeprom 21249 1 em28xx
snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event
arc4 12529 2
ath9k 127538 0
mac80211 310872 1 ath9k
snd_timer 29991 3 snd_pcm,snd_seq
snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq
psmouse 73882 0
ath9k_common 13839 1 ath9k
ath9k_hw 312866 2 ath9k,ath9k_common
serio_raw 13166 0
ath 24067 2 ath9k,ath9k_hw
cfg80211 199587 3 ath9k,mac80211,ath
snd 68266 15 em28xx_alsa,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
shpchp 37345 0
soundcore 12680 1 snd
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
wmi 19256 0
i2c_nforce2 13058 0
lp 17799 0
parport 46562 1 lp
hid_logitech 17677 0
ff_memless 13097 1 hid_logitech
usbhid 47198 1 hid_logitech
hid 95463 2 hid_logitech,usbhid
ahci 26002 2
forcedeth 67563 0
libahci 26861 1 ahci

[greatfront7]

Accidentally closed, reopening.

[sraue]

Hi, it seems we have all drivers and firmwares included already, do you have still the problem with OpenELEC-2.0 Beta 1?

[sraue]

closing, please open a new issue report if this problem still exist