Doesn't pull All the files? #132803
Replies: 11 comments 7 replies
-
Hi @KJL-294 , it is hard to answer your question since you have given so little information. Here are a few questions which, when answering, might help discover the problem, but at this point this is a little like shooting in the dark:
Both these questions can be answered, e.g., on the command line using This command also would tell you other useful things to look out for, e.g., are there conflicts? Without any further information, this is one of the more likely reasons, but you should get an error message about that when you pull. When you do |
Beta Was this translation helpful? Give feedback.
-
How do I make it so that they are? Or how do I check, I’m fairly sure they
should be but would make sense if not
…On Fri, 19 Jul 2024 at 17:02, Frank Löffler ***@***.***> wrote:
Hi @KJL-294 <https://github.com/KJL-294> ,
it is hard to answer your question since you have given so little
information. Here are a few questions which, when answering, might help
discover the problem, but at this point this is a little like shooting in
the dark:
- Are both clients on the same branch?
- Are both your clients on HEAD, that is: on the latest version of the
branch?
Both these questions can be answered, e.g., on the command line using git
status. If you can, you could share the output from that.
This command also would tell you other useful things to look out for,
e.g., are there conflicts? Without any further information, this is one of
the more likely reasons, but you should get an error message about that
when you pull.
When you do git pull, are there any error messages? If so: what are they?
—
Reply to this email directly, view it on GitHub
<#132803 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BIDXRX37QDBPHFFLPEOGLWDZNE2BJAVCNFSM6AAAAABLEYY3ASVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMBZG4ZTGNY>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Sorry I only saw the first bit let me check now
…On Fri, 19 Jul 2024 at 17:02, Frank Löffler ***@***.***> wrote:
Hi @KJL-294 <https://github.com/KJL-294> ,
it is hard to answer your question since you have given so little
information. Here are a few questions which, when answering, might help
discover the problem, but at this point this is a little like shooting in
the dark:
- Are both clients on the same branch?
- Are both your clients on HEAD, that is: on the latest version of the
branch?
Both these questions can be answered, e.g., on the command line using git
status. If you can, you could share the output from that.
This command also would tell you other useful things to look out for,
e.g., are there conflicts? Without any further information, this is one of
the more likely reasons, but you should get an error message about that
when you pull.
When you do git pull, are there any error messages? If so: what are they?
—
Reply to this email directly, view it on GitHub
<#132803 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BIDXRX37QDBPHFFLPEOGLWDZNE2BJAVCNFSM6AAAAABLEYY3ASVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMBZG4ZTGNY>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
There is one error when I pull and it’s fatal error unable to merge
unrelated histories
…On Fri, 19 Jul 2024 at 17:02, Frank Löffler ***@***.***> wrote:
Hi @KJL-294 <https://github.com/KJL-294> ,
it is hard to answer your question since you have given so little
information. Here are a few questions which, when answering, might help
discover the problem, but at this point this is a little like shooting in
the dark:
- Are both clients on the same branch?
- Are both your clients on HEAD, that is: on the latest version of the
branch?
Both these questions can be answered, e.g., on the command line using git
status. If you can, you could share the output from that.
This command also would tell you other useful things to look out for,
e.g., are there conflicts? Without any further information, this is one of
the more likely reasons, but you should get an error message about that
when you pull.
When you do git pull, are there any error messages? If so: what are they?
—
Reply to this email directly, view it on GitHub
<#132803 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BIDXRX37QDBPHFFLPEOGLWDZNE2BJAVCNFSM6AAAAABLEYY3ASVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMBZG4ZTGNY>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
![]() is this whats meant to come up? |
Beta Was this translation helpful? Give feedback.
-
Ah could this be it then? This is on my pc im not sure why its Godot instead of master and im not sure how to change it |
Beta Was this translation helpful? Give feedback.
This comment was marked as off-topic.
This comment was marked as off-topic.
-
Ahh okay yes that makes sense thank you. I’ll try it now
…On Wed, 24 Jul 2024 at 14:13, Frank Löffler ***@***.***> wrote:
okay thank you, how would I go about cloning them? and making sure its
from the same repo
The same way you cloned them initially: there are many ways to do this,
depending on the tools you use. If you want to make sure you use the same
repo, use the same URL when cloning. On the command line this would be
git clone URL where URL is the URL of your repository, but GUI tools
allow you the same.
—
Reply to this email directly, view it on GitHub
<#132803 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BIDXRX6KIYWNRTIED334GMLZN6R6DAVCNFSM6AAAAABLEYY3ASVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAMJTG43DIMY>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
Hey, sorry i got this error when trying to pull |
Beta Was this translation helpful? Give feedback.
-
Select Topic Area
Question
Body
Ive setup a remote repo on github for my mac and windows computer to use, so I can push and pull code from it, However when I try to pull it doesnt update all my files, especially some that I have changed, any ideas?
Beta Was this translation helpful? Give feedback.
All reactions