This module emulates a JTAG port for a remote debug bridge. It can be used together with the JTAG bridge, to debug an RTL simulation. It has been adapted from the OpenRISC debug interface for the PULP project.
The module has been developed and tested with Mentor Graphics ModelSim, but should work with other SystemVerilog compatible simulators.
To use the module inside of ModelSim, it has to be built using the following commands first:
vlog -sv -dpiheader dpiheader.h jtag_dpi.sv
vlog -64 -ccflags "-I./" jtag_dpi.c
Note that ModelSim automatically creates the dpiheader.h file.
The -64 switch is necessary if you are using ModelSim in 64 bit mode.
Contrary to the Verilog legacy VPI interface, the DPI interface is used automatically with the simulation, there is no need to explictly specify the shared library or object file.