As we have seen in previous chapters, a Lightning node is a computer system that participates in the Lightning Network. The Lightning Network is not a product or company, it is a set of open standards that define a baseline for interoperability. As such, Lightning node software has been built by a variety of companies and community groups. The vast majority of Lightning software is open source, meaning that the source code is open and licensed in such as way as to enable collaboration, sharing and community participation in the development process. Similarly, the Lightning node implementations we will present in this chapter are all open source and collaborative developed.
Unlike Bitcoin, where the standard is defined by a reference implementation in software (Bitcoin Core), in Lightning the standard is defined by a series of standards documents called Basis of Lightning Technology (BOLT), found at the lightning-rfc repository at:
There is no reference implementation of the Lightning Network, but there are several competing, BOLT-compliant and interoperable implementations developed by different teams and organizations. The teams that develop software for the Lightning Network also contribute in the development and evolution of the BOLT standards.
Another major difference between Lightning node software and Bitcoin node software is that Lightning nodes do not need to operate in "lockstep" with consensus rules and can have extended functionality beyond the baseline of the BOLTS. Therefore, different teams may pursue various experimental features that, if successful and broadly deployed, may become part of the BOLTs later.
In this chapter you will learn how to set up each of the software packages for the most popular Lightning node implementations. We’ve presented them in alphabetical order to emphasize that we generally do not prefer or endorse one over the other. Each has its strengths and weaknesses and choosing one will depend on a variety of factors. Since they are developed in different programming languages (e.g. Go, C, etc.) your choice may also depend on your level of familiarity and expertise with a specific language and development toolset.
If you’re a developer, you will want to set up a development environment with all the tools, libraries, and support software for writing and running Lightning software. In this highly technical chapter, we’ll walk through that process step-by-step. If the material becomes too dense or you’re not actually setting up a development environment, then feel free to skip to the next chapter, which is less technical.
The examples in this chapter, and more broadly in most of this book, use a command-line terminal. That means that you type commands into a terminal and receive text responses. Furthermore, the examples are demonstrated on an operating system based on the Linux kernel and GNU software system, specifically the latest long-term stable release of Ubuntu (Ubuntu 20.04 LTS). The majority of the examples can be replicated on other operating systems such as Windows or Mac OS, with small modifications to the commands. The biggest difference between operating systems is the package manager which installs the various software libraries and their pre-requisites. In the given examples, we will use apt, which is the package manager for Ubuntu. On Mac OS, a common package manager used for open source development is Homebrew (command brew) found at https://brew.sh.
In most of the examples here, we will be building the software directly from the source code. While this can be quite challenging, it gives us the most power and control. You may choose to use docker containers, pre-compiled packages or other installation mechanisms instead if you get stuck!
|
Tip
|
In many of the examples in this chapter we will be using the operating system’s command-line interface (also known as a "shell"), accessed via a "terminal" application. The shell will first display a prompt as an indicator that it is ready for your command. Then you type a command and press "Enter" to which the shell responds with some text and a new prompt for your next command. The prompt may look different on your system, but in the following examples it is denoted by a $ symbol. In the examples, when you see text after a $ symbol, don’t type the $ symbol but type the command immediately following it. Then press the Enter key to execute the command. In the examples, the lines below each command are the operating system’s responses to that command. When you see the next $ prefix, you’ll know it is a new command and you should repeat the process. |
To keep things consistent, we use the bash shell in all command-line examples. While other shells will behave in a similar way, and you will be able to run all the examples without it, some of the shell scripts are written specifically for the bash shell and may require some changes or customizations to run in another shell. For consistency, you can install the bash shell on Windows and Mac OS, and it comes installed by default on most Linux systems.
All the code examples are available in the book’s online repository. Because the repository will be kept up-to-date as much as possible, you should always look for the latest version in the online repository, instead of copying it from the printed book or the ebook.
You can download the repository as a ZIP bundle by visiting github.com/lnbook/lnbook and selecting the green "Clone or Download" button on the right.
Alternatively, you can use the git command to create a version-controlled clone of the repository on your local computer. Git is a distributed version control system that is used by most developers to collaborate on software development and track changes to software repositories. Donwload and install git by following the instructions on https://git-scm.com/.
To make a local copy of the repository on your computer, run the git command as follows:
$ git clone git@github.com:lnbook/lnbook.git
You now have a complete copy of the book repository in a folder called lnbook. All subsequent examples will assume that you are running commands from that folder.
Many developers use a container, which is a type of virtual machine, to install a pre-configured operating system and applications with all the necessary dependencies. Much of the Lightning software can also be installed using a container system such as Docker (command docker) found at https://docker.com. Container installations are a lot easier, especially for those who are not used to a command-line environment.
The book’s repository contains a collection of docker containers that can be used to set up a consistent development environment to practice and replicate the examples on any system. Because the container is a complete operating system that runs with a consistent configuration, you can be sure that the examples will work on your computer and need not worry about dependencies, library versions or differences in configuration.
Docker containers are often optimized to be small, i.e. occupy the minimum disk space. However, in this book we are using containers to standardize the environment and make it consistent for all readers. Furthermore, these containers are not meant to be used to run services in the background. Instead, they are meant to be used to test the examples and learn by interacting with the software. For these reasons, the containers are quite large and come with a lot of development tools and utilities. Commonly the Alpine distribution is used for Linux containers due to their reduced size. Nonetheless, we provide containers built on Ubuntu because more developers are familiar with Ubuntu, and this familiarity is more important to us than size.
You can find the latest container definitions and build configurations in the book’s repository under the code/docker folder. Each container is in a separate folder as can be seen below:
//// $ tree -F --charset=asciii code
code
`-- docker/
|-- bitcoind/
| |-- bashrc
| |-- bitcoind/
| | |-- bitcoin.conf
| | `-- keys/
| | |-- demo_address.txt
| | |-- demo_mnemonic.txt
| | `-- demo_privkey.txt
| |-- bitcoind-entrypoint.sh
| |-- Dockerfile
| `-- mine.sh*
|-- c-lightning/
| |-- bashrc
| |-- c-lightning-entrypoint.sh
| |-- Dockerfile
| |-- fund-c-lightning.sh
| |-- lightningd/
| | `-- config
| |-- logtail.sh
| `-- wait-for-bitcoind.sh
|-- eclair/
| |-- bashrc
| |-- Dockerfile
| |-- eclair/
| | `-- eclair.conf
| |-- eclair-entrypoint.sh
| |-- logtail.sh
| `-- wait-for-bitcoind.sh
|-- lnbook-app/
| |-- docker-compose.yml
| `-- setup-channels.sh
`-- lnd/
|-- bashrc
|-- Dockerfile
|-- fund-lnd.sh
|-- lnd/
| `-- lnd.conf
|-- lnd-entrypoint.sh
|-- logtail.sh
`-- wait-for-bitcoind.sh
Before we begin, you should install the docker container system on your computer. Docker is an open system that is distributed for free as a Community Edition for many different operating systems including Windows, Mac OS and Linux. The Windows and Mac versions are called Docker Desktop and consist of a GUI desktop application and command-line tools. The Linux version is called Docker Engine and is comprised of a server daemon and command-line tools. We will be using the command-line tools, which are identical across all platforms.
Go ahead and install Docker for your operating system by following the instructions to "Get Docker" from the Docker website found here:
Select your operating system from the list and follow the installation instructions.
|
Tip
|
If you install on Linux, follow the post-installation instructions to ensure you can run Docker as a regular user instead of user root. Otherwise, you will need to prefix all docker commands with sudo, running them as root like: sudo docker. |
Once you have Docker installed, you can test your installation by running the demo container hello-world like this:
$ docker run hello-world Hello from Docker! This message shows that your installation appears to be working correctly. [...]
In this chapter we use docker quite extensively. We will be using the following docker commands and arguments:
Building a container
docker build [-t tag] [directory]
…where tag is how we identify the container we are building, and directory is where the container’s "context" (folders and files) and definition file (Dockerfile) are found.
Running a container
docker run -it [--network netname] [--name cname] tag
…where netname is the name of a docker network, cname is the name we choose for this container instance and tag is the name tag we gave the container when we built it.
Executing a command in a container
docker exec cname command
…where cname is the name we gave the container in the run command, and command is an executable or script that we want to run inside the container.
Stopping a container
In most cases, if we are running a container in an interactive as well as terminal mode, i.e. with the i and t flags (combined as -it) set, the container can be stopped by simply pressing CTRL-C or by exiting the shell with exit or CTRL-D. If a container does not terminate, you can stop it from another terminal like this:
docker stop cname
…where cname is the name we gave the container when we ran it.
Deleting a container by name
If you name a container instead of letting docker name it randomly, you cannot reuse that name until the container is deleted. Docker will return an error like this:
docker: Error response from daemon: Conflict. The container name "/bitcoind" is already in use...
To fix this, delete the existing instance of the container:
docker rm cname
…where cname is the name assigned to the container (bitcoind in the example error message)
List running containers
docker ps
These basic docker commands will be enough to get you started and will allow you to run all the examples in this chapter. Let’s see them in action in the following sections.
Most of the Lightning node implementations need access to a full Bitcoin node in order to work.
Installing a full Bitcoin node and synching the Bitcoin blockchain is outside the scope of this book and is a relatively complex endeavor in itself. If you want to try it, refer to Mastering Bitcoin (https://github.com/bitcoinbook/bitcoinbook), "Chapter 3: Bitcoin Core: The Reference Implementation" which discusses the installation and operation of a Bitcoin node.
A Bitcoin node can be operated in regtest mode, where the node creates a local simulated Bitcoin blockchain for testing purposes. In the following examples we will be using the regtest mode to allow us to demonstrate Lightning without having to synchronize a Bitcoin node or risk any funds.
The container for Bitcoin Core is bitcoind. It is configured to run Bitcoin Core in regtest mode and to mine a new block every 10 seconds. Its RPC port is exposed on port 18443 and accessible for RPC calls with the username regtest and the password regtest. You can also access it with an interactive shell and run bitcoin-cli commands locally.
Let’s start by building and running the bitcoind container. First, we use the docker build command to build it:
$ cd code/docker $ docker build -t lnbook/bitcoind bitcoind Sending build context to Docker daemon 12.29kB Step 1/25 : FROM ubuntu:20.04 AS bitcoind-base ---> c3c304cb4f22 Step 2/25 : RUN apt update && apt install -yqq curl gosu jq bash-completion [...] Step 25/25 : CMD ["/usr/local/bin/mine.sh"] ---> Using cache ---> 758051998e72 Successfully built 758051998e72 Successfully tagged lnbook/bitcoind:latest
Next, let’s run the bitcoind container and have it mine some blocks. We use the docker run command, with the flags for interactive (i) and terminal (t), and the name argument to give the running container a custom name:
$ docker run -it --name bitcoind lnbook/bitcoind Starting bitcoind... Bitcoin Core starting bitcoind started ================================================ Importing demo private key Bitcoin address: 2NBKgwSWY5qEmfN2Br4WtMDGuamjpuUc5q1 Private key: cSaejkcWwU25jMweWEewRSsrVQq2FGTij1xjXv4x1XvxVRF1ZCr3 ================================================ Mining 101 blocks to unlock some bitcoin [ "579311009cc4dcf9d4cc0bf720bf210bfb0b4950cdbda0670ff56f8856529b39", ... "33e0a6e811d6c49219ee848604cedceb0ab161485e1195b1f3576049e4d5deb7" ] Mining 1 block every 10 seconds [ "5974aa6da1636013daeaf730b5772ae575104644b8d6fa034203d2bf9dc7a98b" ] Balance: 100.00000000
As you can see, bitcoind starts up and mines 101 simulated blocks to get the chain started. This is because under the bitcoin consensus rules, newly mined bitcoin is not spendable until 100 blocks have elapsed. By mining 101 blocks, we make the first block’s coinbase spendable. After that initial mining activity, a new block is mined every 10 seconds to keep the chain moving forward.
For now, there are no transactions. But we have some test bitcoin that has been mined in the wallet and is available to spend. When we connect some Lightning nodes to this chain, we will send some bitcoin to their wallets so that we can open some Lightning channels between the Lightning nodes.
In the mean time, we can also interact with the bitcoind container by sending it shell commands. The container is sending a log file to the terminal, displaying the mining process of the bitcoind process. To interact with the shell we can issue commands in another terminal, using the docker exec command. Since we previously named the running container with the name argument, we can refer to it by that name when we run the docker exec command. First, let’s run an interactive bash shell:
$ docker exec -it bitcoind /bin/bash
root@e027fd56e31a:/bitcoind# ps x
PID TTY STAT TIME COMMAND
1 pts/0 Ss+ 0:00 /bin/bash /usr/local/bin/mine.sh
7 ? Ssl 0:03 bitcoind -datadir=/bitcoind -daemon
97 pts/1 Ss 0:00 /bin/bash
124 pts/0 S+ 0:00 sleep 10
125 pts/1 R+ 0:00 ps x
root@e027fd56e31a:/bitcoind#
Running the interactive shell puts us "inside" the container. It logs in as user root, as we can see from the prefix root@ in the new shell prompt root@e027fd56e31a:/bitcoind#. If we issue the ps x command to see what processes are running, we see both bitcoind and the script mine.sh are running in the background. To exit this shell, type CTRL-D or exit and you will be returned to your operating system prompt.
Instead of running an interactive shell, we can also issue a single command that is executed inside the container. In the following example we run the bitcoin-cli command to obtain information about the current blockchain state:
$ docker exec bitcoind bitcoin-cli -datadir=/bitcoind getblockchaininfo
{
"chain": "regtest",
"blocks": 149,
"headers": 149,
"bestblockhash": "35e97bf507607be010be1daa10152e99535f7b0f9882d0e588c0037d8d9b0ba1",
"difficulty": 4.656542373906925e-10,
[...]
"warnings": ""
}
$
As you can see, we need to tell bitcoin-cli where the bitcoind data directory is by using the datadir argument. We can then issue RPC commands to the Bitcoin Core node and get JSON encoded results.
All our docker containers have jq, which is a command-line JSON encoder/decoder, preinstalled. jq helps us to process JSON-formatted data via the command-line or from inside scripts. You can send the JSON output of any command to jq using the | character. This character as well as this operation is called a "pipe". Let’s apply a pipe and jq to the previous command as follows:
$ docker exec bitcoind bash -c "bitcoin-cli -datadir=/bitcoind getblockchaininfo | jq .blocks" 189
jq .blocks instructs the jq JSON decoder to extract the field blocks" from the +getblockchaininfo result. In our case, it extracts and prints the value of 189 which we could use in a subsequent command.
As you will see in the following sections, we can run several containers at the same time and then interact with them individually. We can issue commands to extract information such as the Lightning node public key, or to take actions such as opening a Lightning channel to another node. The docker run and docker exec commands together with jq for JSON decoding are all we need to build a working Lightning Network that mixes many different node implementations. This enables us to try out diverse experiments on our own computer.
C-lightning is a lightweight, highly customizable, and standard-compliant implementation of the Lightning Network protocol, developed by Blockstream as part of the Elements project. The project is open source and developed collaboratively on Github:
In the following sections, we will build a docker container that runs a c-lightning node connecting to the bitcoind container we build previously. We will also show you how to configure and build the c-lightning software directly from the source code.
The c-lightning software distribution has a docker container, but it is designed for running c-lightning in production systems and along side a bitcoind node. We will be using a somewhat simpler container configured to run c-lightning for demonstration purposes.
We start by building the c-lightning docker container, from the book’s files which you previously downloaded into a directory named lnbook. As before, we will use the docker build command, in the code/docker sub-directory. We will tag the container image with the tag lnbook/c-lightning, like this:
$ cd code/docker $ docker build -t lnbook/c-lightning c-lightning Sending build context to Docker daemon 10.24kB Step 1/21 : FROM lnbook/bitcoind AS c-lightning-base ---> 758051998e72 Step 2/21 : RUN apt update && apt install -yqq software-properties-common [...] Step 21/21 : CMD ["/usr/local/bin/logtail.sh"] ---> Using cache ---> e63f5aaa2b16 Successfully built e63f5aaa2b16 Successfully tagged lnbook/c-lightning:latest
Our container is now built and ready to run. However, before we run the c-lightning container, we need to start the bitcoind container in another terminal, as c-lightning depends on bitcoind. We will also need to set up a docker network that allows the containers to connect to each other, as if they are on the same local area network.
|
Tip
|
Docker containers can "talk" to each other over a virtual local-area network managed by the docker system. Each container can also have a custom name and other containers can use that name to resolve its IP address and easily connect to it. |
Once a docker network is set up, docker will keep it running on our local computer every time docker starts, for example after rebooting. So we only need to set up a network once, using the docker network create command. The network name itself is not important, but has to be unique on our computer. By default, docker has three networks named host, bridge, and none. We will name our new network lnbook and create it like this:
$ docker network create lnbook ad75c0e4f87e5917823187febedfc0d7978235ae3e88eca63abe7e0b5ee81bfb $ docker network ls NETWORK ID NAME DRIVER SCOPE 7f1fb63877ea bridge bridge local 4e575cba0036 host host local ad75c0e4f87e lnbook bridge local ee8824567c95 none null local
As you can see, running docker network ls gives us a listing of the docker networks. Our lnbook network has been created. We can ignore the network ID, as it is automatically managed.
Let’s start the bitcoind and c-lightning containers and connect them to the lnbook network. To run a container in a specific network, we must pass the network argument to docker run. To make it easy for containers to find each other, we will also give each one a name with the name argument. We start bitcoind like this:
$ docker run -it --network lnbook --name bitcoind lnbook/bitcoind
You should see bitcoind start up and start mining blocks every 10 seconds. Leave it running and open a new terminal window to start c-lightning. We use a similar docker run command, with the network and name arguments to start c-lightning, like this:
$ docker run -it --network lnbook --name c-lightning lnbook/c-lightning
Waiting for bitcoind to start...
Waiting for bitcoind to mine blocks...
Starting c-lightning...
[...]
Startup complete
Funding c-lightning wallet
{"result":"e1a392ce2c6af57f8ef1550ccb9a120c14b454da3a073f556b55dc41592621bb","error":null,"id":"c-lightning-container"}
[...]
2020-06-22T14:26:09.802Z DEBUG lightningd: Opened log file /lightningd/lightningd.log
The c-lightning container starts up and connects to the bitcoind container over the docker network. First, our c-lightning node will wait for bitcoind to start and then it will wait until bitcoind has mined some bitcoin into its wallet. Finally, as part of the container startup, a script will send an RPC command to the bitcoind node, creating a transaction that funds the c-lightning wallet with 10 test BTC. Our c-lightning node is not only running, but it has some bitcoin to play with!
As we demonstrated with the bitcoind container, we can issue commands to our c-lightning container in another terminal, to extract information, open channels etc. The command that allows us to issue command-line instructions to the c-lightning node is called lightning-cli. Let’s get the node info, in another terminal window, using the docker exec command:
$ docker exec c-lightning lightning-cli getinfo
{
"id": "025656e4ef0627bc87638927b8ad58a0e07e8d8d6e84a5699a5eb27b736d94989b",
"alias": "HAPPYWALK",
"color": "025656",
"num_peers": 0,
"num_pending_channels": 0,
"num_active_channels": 0,
"num_inactive_channels": 0,
"address": [],
"binding": [
{
"type": "ipv6",
"address": "::",
"port": 9735
},
{
"type": "ipv4",
"address": "0.0.0.0",
"port": 9735
}
],
"version": "0.8.2.1",
"blockheight": 140,
"network": "regtest",
"msatoshi_fees_collected": 0,
"fees_collected_msat": "0msat",
"lightning-dir": "/lightningd/regtest"
}
We now have our first Lightning node running on a virtual network and communicating with a test bitcoin blockchain. Later in this chapter we will start more nodes and connect them to each other to make some Lightning payments.
In the next section we will also look at how to download, configure and compile c-lightning directly from the source code. This is an optional and advanced step that will teach you how to use the build tools and allow you to make modifications to c-lighting source code. With this knowledge, you can write some code, fix some bugs, or create a plugin for c-lightning. If you are not planning on diving into the source code or programming of a Lightning node, you can skip the next section entirely. The docker container we just built is sufficient for most of the examples in the book.
The c-lightning developers have provided detailed instructions for building c-lightning from source code. We will be following the instructions here:
The first step, as is often the case, is the installation of pre-requisite libraries. We use the apt package manager to install these:
$ sudo apt-get update Get:1 http://security.ubuntu.com/ubuntu bionic-security InRelease [88.7 kB] Hit:2 http://eu-north-1b.clouds.archive.ubuntu.com/ubuntu bionic InRelease Get:3 http://eu-north-1b.clouds.archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB] [...] Fetched 18.3 MB in 8s (2,180 kB/s) Reading package lists... Done $ sudo apt-get install -y \ autoconf automake build-essential git libtool libgmp-dev \ libsqlite3-dev python python3 python3-mako net-tools zlib1g-dev \ libsodium-dev gettext Reading package lists... Done Building dependency tree Reading state information... Done The following additional packages will be installed: autotools-dev binutils binutils-common binutils-x86-64-linux-gnu cpp cpp-7 dpkg-dev fakeroot g++ g++-7 gcc gcc-7 gcc-7-base libalgorithm-diff-perl [...] Setting up libsigsegv2:amd64 (2.12-2) ... Setting up libltdl-dev:amd64 (2.4.6-14) ... Setting up python2 (2.7.17-2ubuntu4) ... Setting up libsodium-dev:amd64 (1.0.18-1) ... [...] $
After a few minutes and a lot of on-screen activity, you will have installed all the necessary packages and libraries. Many of these libraries are also used by other Lightning packages and for software development in general.
Next, we will copy the latest version of c-lightning from the source code repository. To do this, we will use the git clone command, which clones a version-controlled copy onto your local machine, allowing you to keep it synchronized with subsequent changes without having to download the whole thing again:
$ git clone https://github.com/ElementsProject/lightning.git Cloning into 'lightning'... remote: Enumerating objects: 24, done. remote: Counting objects: 100% (24/24), done. remote: Compressing objects: 100% (22/22), done. remote: Total 53192 (delta 5), reused 5 (delta 2), pack-reused 53168 Receiving objects: 100% (53192/53192), 29.59 MiB | 19.30 MiB/s, done. Resolving deltas: 100% (39834/39834), done. $ cd lightning
We now have a copy of c-lightning, cloned into the lightning subfolder, and we have used the cd (change directory) command to enter that subfolder.
Next, we use a set of build scripts that are commonly available on many open source projects. These are configure and make, and they allow us to:
-
Select the build options and check necessary dependencies (configure).
-
Build and install the executables and libraries (make).
Running the configure with the help option will show us all the options that we can set:
$ ./configure --help
Usage: ./configure [--reconfigure] [setting=value] [options]
Options include:
--prefix= (default /usr/local)
Prefix for make install
--enable/disable-developer (default disable)
Developer mode, good for testing
--enable/disable-experimental-features (default disable)
Enable experimental features
--enable/disable-compat (default enable)
Compatibility mode, good to disable to see if your software breaks
--enable/disable-valgrind (default (autodetect))
Run tests with Valgrind
--enable/disable-static (default disable)
Static link sqlite3, gmp and zlib libraries
--enable/disable-address-sanitizer (default disable)
Compile with address-sanitizer
We don’t need to change any of the defaults for this example, so we run configure again, without any options, to set the defaults:
$ ./configure Compiling ccan/tools/configurator/configurator...done checking for python3-mako... found Making autoconf users comfortable... yes checking for off_t is 32 bits... no checking for __alignof__ support... yes [...] Setting COMPAT... 1 PYTEST not found Setting STATIC... 0 Setting ASAN... 0 Setting TEST_NETWORK... regtest $
Next, we use the make command to build the libraries, components and executables of the c-lightning project. This part will take several minutes to complete and will use your computers CPU and disk aggressively, so expect some noise from the fans! Running make:
$ make cc -DBINTOPKGLIBEXECDIR="\"../libexec/c-lightning\"" -Wall -Wundef -Wmis... [...] cc -Og ccan-asort.o ccan-autodata.o ccan-bitmap.o ccan-bitops.o ccan-...
If all goes well, you will not see any ERROR message stopping the execution of the above command. The c-lightning software package has been compiled from source and we are now ready to install the executable packages:
$ sudo make install mkdir -p /usr/local/bin mkdir -p /usr/local/libexec/c-lightning mkdir -p /usr/local/libexec/c-lightning/plugins mkdir -p /usr/local/share/man/man1 mkdir -p /usr/local/share/man/man5 mkdir -p /usr/local/share/man/man7 mkdir -p /usr/local/share/man/man8 mkdir -p /usr/local/share/doc/c-lightning install cli/lightning-cli lightningd/lightningd /usr/local/bin [...]
Let’s check and see if the lightningd and lightning-cli commands have been installed correctly, asking each for their version information:
$ lightningd --version v0.8.1rc2 $ lightning-cli --version v0.8.1rc2
You may see a different version from that shown above, as the software continues to evolve long after this book is printed. However, no matter what version you see, the fact that the commands execute and show you version information means that you have succeeded in building the c-lightning software.
The Lightning Network Daemon (LND) - is a complete implementation of a Lightning Network node by Lightning Labs. The LND project provides a number of executable applications, including lnd, (the daemon itself) and lncli (the command-line utility). LND has several pluggable back-end chain services including btcd (a full-node), bitcoind (Bitcoin Core), and neutrino (a new experimental light client). LND is written in the Go programming language (golang). The project is open source and developed collaboratively on Github:
In the next few sections we will build a docker container to run LND, build LND from source code and learn how to configure and run LND.
If you’ve followed the previous examples in this chapter, you should be quite familiar with the basic docker commands by now. In this section we will repeat them to build the LND container. The container is located in code/docker/lnd. We start in a terminal, by switching the working directory to code/docker and issuing the docker build command:
$ cd code/docker $ docker build -t lnbook/lnd lnd Sending build context to Docker daemon 9.728kB Step 1/29 : FROM golang:1.13 as lnd-base ---> e9bdcb0f0af9 Step 2/29 : ENV GOPATH /go [...] Step 29/29 : CMD ["/usr/local/bin/logtail.sh"] ---> Using cache ---> 397ce833ce14 Successfully built 397ce833ce14 Successfully tagged lnbook/lnd:latest
Our container is now built and ready to run. As with the c-lightning container we built previously, the LND container also depends on a running instance of Bitcoin Core. As before, we need to start the bitcoind container in another terminal and connect LND to it via a docker network. We’ve already set up a docker network called lnbook and will be using that again here.
|
Tip
|
A single bitcoind container can serve many many Lightning nodes. Normally, each node operator would run a Lightning node and Bitcoin node on their own server. Since we are simulating a network we can run several Lightning nodes, all connecting to a single Bitcoin node in regtest mode. |
As before, we start the bitcoind container in one terminal and LND in another. If you already have the bitcoind container running, you do not need to restart it. Just leave it running and skip the next step. To start bitcoin in the lnbook network, we use docker run, like this:
$ docker run -it --network lnbook --name bitcoind lnbook/bitcoind
Next, we start the LND container we just built. We will need to attach it to the lnbook network and give it a name, just as we did with the other containers:
$ docker run -it --network lnbook --name lnd lnbook/lnd
Waiting for bitcoind to start...
Waiting for bitcoind to mine blocks...
Starting lnd...
Startup complete
Funding lnd wallet
{"result":"795a8f4fce17bbab35a779e92596ba0a4a1a99aec493fa468a349c73cb055e99","error":null,"id":"lnd-run-container"}
[...]
2020-06-23 13:42:51.841 [INF] LTND: Active chain: Bitcoin (network=regtest)
The LND container starts up and connects to the bitcoind container over the docker network. First, our LND node will wait for bitcoind to start and then it will wait until bitcoind has mined some bitcoin into its wallet. Finally, as part of the container startup, a script will send an RPC command to the bitcoind node, creating a transaction that funds the LND wallet with 10 test BTC.
As we demonstrated previously, we can issue commands to our container in another terminal, to extract information, open channels etc. The command that allows us to issue command-line instructions to the lnd daemon is called lncli. Let’s get the node info, in another terminal window, using the docker exec command:
$ docker exec lnd lncli -n regtest getinfo
{
"version": "0.10.99-beta commit=clock/v1.0.0-85-gacc698a6995b35976950282b29c9685c993a0364",
"commit_hash": "acc698a6995b35976950282b29c9685c993a0364",
"identity_pubkey": "03e436739ec70f3c3630a62cfe3f4b6fd60ccf1f0b69a0036f73033c1ac309426e",
"alias": "03e436739ec70f3c3630",
"color": "#3399ff",
"num_pending_channels": 0,
"num_active_channels": 0,
"num_inactive_channels": 0,
[...]
}
We now have another Lightning node running on the lnbook network and communicating with bitcoind. If you are still running the c-lightning container, there are now two nodes running. They’re not yet connected to each other, but we will be connecting them to each other soon.
If you want, you can run several LND nodes, or c-lightning nodes, or any combination of these on the same Lightning network. To run a second LND node, for example, you would issue the docker run command with a different container name, like this:
$ docker run -it --network lnbook --name lnd2 lnbook/lnd
In the command above, we start another LND container, named lnd2. The names are entirely up to you, as long as they are unique. If you don’t provide a name, docker will construct a unique name by randomly combining two English words, such as "naughty_einstein" (this is the actual name docker chose when we wrote this paragraph - how funny!).
In the next section we will also look at how to download and compile LND directly from the source code. This is an optional and advanced step that will teach you how to use the Go language build tools and allow you to make modifications to LND source code. With this knowledge, you can write some code, or fix some bugs. If you are not planning on diving into the source code or programming of a Lightning node, you can skip the next section entirely. The docker container we just built is sufficient for most of the examples in the book.
In this section we will build LND from scratch. LND is written in the Go programming language (search for golang to avoid irrelevant results on the word "go"). Because it is written in Go and not C or C++, it uses a different "build" framework than the GNU autotools/make framework we saw used in c-lightning previously. Don’t fret though, it is quite easy to install and use the golang tools and we will show each step here. Go is a fantastic language for collaborative software development as it produces very consistent, precise and easy to read code regardless of the number of authors. Go is focused and "minimalist" in a way that encourages consistency across versions of the language. As a compiled language, it is also quite efficient. Let’s dive in.
We will follow the installation instructions found on the LND project documentation:
First, we will install the golang package and associated libraries. We need, at minimum Go version 1.13 or later. The official Go language packages are distributed as binaries from https://golang.org/dl. For convenience they are also packaged as debian packages distributed through the apt command. You can follow the instructions on https://golang.org/dl or use the apt commands below on a Debian/Ubuntu Linux system as described on https://github.com/golang/go/wiki/Ubuntu:
$ sudo apt install golang-go
Check that you have the correct version installed and ready to use by running:
$ go version go version go1.13.4 linux/amd64
We have 1.13.4, so we’re ready to… Go! Next we need to tell any programs where to find the Go code. This is accomplished with the environment variable GOPATH. It doesn’t matter where the GOPATH points, as long as you set it consistently. Usually it is located under the current user’s home directory (referred to as ~ in the shell). Set the GOPATH and make sure your shell adds it to your executable PATH like this:
export GOPATH=~/gocode export PATH=$PATH:$GOPATH/bin
To avoid having to set these environment variables every time you open a shell, you can add those two lines to the end of your bash shell configuration file .bashrc in your home directory, using the editor of your choice.
As with many open source projects nowadays, the source code for LND is on Github. The go get command can fetch it directly using the git protocol:
$ go get -d github.com/lightningnetwork/lnd
Once git clone finishes, you will have a sub-directory under GOPATH that contains the LND source code.
LND uses the make build system for convenience. To build the project, we change directory to LND’s source code and then use make, like this:
cd $GOPATH/src/github.com/lightningnetwork/lnd make && make install
After several minutes, you will have two new commands lnd and lncli installed. Try them out and check their version, to ensure they are installed:
$ lnd --version lnd version 0.10.99-beta commit=clock/v1.0.0-106-gc1ef5bb908606343d2636c8cd345169e064bdc91 $ lncli --version lncli version 0.10.99-beta commit=clock/v1.0.0-106-gc1ef5bb908606343d2636c8cd345169e064bdc91
You will likely see a different version from that shown above, as the software continues to evolve long after this book is printed. However, no matter what version you see, the fact that the commands execute and show you version information means that you have succeeded in building the LND software.
Eclair (French for Lightning) is a Scala implementation of the Lightning Network, made by ACINQ. Eclair is also one of the most popular and pioneering mobile Lightning wallets, which we used to demonstrate a Lightning payment in the second chapter. In this section we are examining the Eclair server project, which runs a Lightning node. Eclair is an open source project and can be found on GitHub:
In the next few sections we will build a docker container to run Eclair, as we did previously with c-lightning and LND. We will also build Eclair directly from the source code.
By this point, you are almost an expert in the basic operations of docker! In this section we will repeat many of the commands you have seen previously to build the Eclair container. The container is located in code/docker/eclair. We start in a terminal, by switching the working directory to code/docker and issuing the docker build command:
$ cd code/docker $ docker build -t lnbook/eclair eclair Sending build context to Docker daemon 9.216kB Step 1/22 : FROM ubuntu:20.04 AS eclair-base ---> c3c304cb4f22 Step 2/22 : RUN apt update && apt install -yqq curl gosu jq bash-completion ---> Using cache ---> 3f020e1a2218 Step 3/22 : RUN apt update && apt install -yqq openjdk-11-jdk unzip ---> Using cache ---> b068481603f0 [...] Step 22/22 : CMD ["/usr/local/bin/logtail.sh"] ---> Using cache ---> 5307f28ff1a0 Successfully built 5307f28ff1a0 Successfully tagged lnbook/eclair:latest
Our container is now built and ready to run. The Eclair container also depends on a running instance of Bitcoin Core. As before, we need to start the bitcoind container in another terminal and connect Eclair to it via a docker network. We’ve already set up a docker network called lnbook and will be using that again here.
One notable difference between Eclair and LND or c-lightning is that Eclair doesn’t contain a separate bitcoin wallet, but instead relies on the bitcoin wallet in Bitcoin Core directly. For example, whereas with LND we "funded" it’s bitcoin wallet by executing a transaction to transfer bitcoin from Bitcoin Core’s wallet to LND’s bitcoin wallet, this step is not necessary. When running Eclair, the Bitcoin Core wallet is used directly as the source of funds to open channels. As a result, the Eclair container does not contain a script to transfer bitcoin into its wallet on startup, unlike the LND or c-lightning containers.
As before, we start the bitcoind container in one terminal and the eclair container in another. If you already have the bitcoind container running, you do not need to restart it. Just leave it running and skip the next step. To start bitcoin in the lnbook network, we use docker run, like this:
$ docker run -it --network lnbook --name bitcoind lnbook/bitcoind
Next, we start the eclair container we just built. We will need to attach it to the lnbook network and give it a name, just as we did with the other containers:
$ docker run -it --network lnbook --name eclair lnbook/eclair Waiting for bitcoind to start... Waiting for bitcoind to mine blocks... Starting eclair... Eclair node started /usr/local/bin/logtail.sh INFO fr.acinq.eclair.Plugin$ - loading 0 plugins INFO a.e.slf4j.Slf4jLogger - Slf4jLogger started INFO fr.acinq.eclair.Setup - hello! INFO fr.acinq.eclair.Setup - version=0.4 commit=69c538e [...]
The eclair container starts up and connects to the bitcoind container over the docker network. First, our eclair node will wait for bitcoind to start and then it will wait until bitcoind has mined some bitcoin into its wallet.
As we demonstrated previously, we can issue commands to our container in another terminal, to extract information, open channels etc. The command that allows us to issue command-line instructions to the eclair daemon is called eclair-cli. The eclair-cli command expects a password, which we have set to "eclair" in this container and we will pass eclair-cli that password with the p flag. Let’s get the node info, in another terminal window, using the docker exec command:
$ docker exec eclair eclair-cli -p eclair getinfo
{
"version": "0.4-69c538e",
"nodeId": "03ca28ed39b412626dd5efc514add8916282a1360556f8101ed3f06eea43d6561a",
"alias": "eclair",
"color": "#49daaa",
"features": "0a8a",
"chainHash": "06226e46111a0b59caaf126043eb5bbf28c34f3a5e332a1fc7b2b73cf188910f",
"blockHeight": 123,
"publicAddresses": []
}
We now have another Lightning node running on the lnbook network and communicating with bitcoind. If you want, you can run several Eclair nodes, or LND, or c-lightning nodes, or any combination of these on the same Lightning network. To run a second Eclair node, for example, you would issue the docker run command with a different container name, like this:
$ docker run -it --network lnbook --name eclair2 lnbook/eclair
In the command above, we start another Eclair container, named eclair2.
In the next section we will also look at how to download and compile Eclair directly from the source code. This is an optional and advanced step that will teach you how to use the Scala and Java language build tools and allow you to make modifications to Eclair’s source code. With this knowledge, you can write some code, or fix some bugs. If you are not planning on diving into the source code or programming of a Lightning node, you can skip the next section entirely. The docker container we just built is sufficient for most of the examples in the book.
In this section we will build Eclair from scratch. Eclair is written in the Scala programming language, which is compiled using the Java compiler. To run Eclair, we first need to install Java and its build tools. We will be following the instructions found on the Eclair project in the BUILD.md document:
The Java compiler we need is part of OpenJDK 11. We will also need a buid framework called Maven, version 3.6.0 or above.
On a Debian/Ubuntu Linux system, we can use the apt commands below to install OpenJDK11 and Maven:
$ sudo apt install -y openjdk-11-jdk maven
Check that you have the correct version installed and ready to use by running:
$ javac -version javac 11.0.7 $ mvn -v Apache Maven 3.6.1 Maven home: /usr/share/maven Java version: 11.0.7, vendor: Ubuntu, runtime: /usr/lib/jvm/java-11-openjdk-amd64
We have OpenJDK 11.0.7 and Maven 3.6.1, so we’re ready.
The source code for Eclair is on Github. The git clone command can create a local copy for us. Let’s switch to our home directory and run it there:
$ cd $ git clone https://github.com/ACINQ/eclair.git
Once git clone finishes, you will have a sub-directory Eclair containing the source code for the Eclair server.
Eclair uses the Maven build system. To build the project, we change directory to Eclair’s source code and then use mvn package, like this:
$ cd eclair $ mvn package [INFO] Scanning for projects... [INFO] ------------------------------------------------------------------------ [INFO] Reactor Build Order: [INFO] [INFO] eclair_2.13 [pom] [INFO] eclair-core_2.13 [jar] [INFO] eclair-node [jar] [INFO] eclair-node-gui [jar] [INFO] [INFO] --------------------< fr.acinq.eclair:eclair_2.13 >--------------------- [INFO] Building eclair_2.13 0.4.1-SNAPSHOT [1/4] [INFO] --------------------------------[ pom ]--------------------------------- [...] [INFO] eclair_2.13 ........................................ SUCCESS [ 3.032 s] [INFO] eclair-core_2.13 ................................... SUCCESS [ 7.935 s] [INFO] eclair-node ........................................ SUCCESS [ 35.127 s] [INFO] eclair-node-gui .................................... SUCCESS [ 20.535 s] [INFO] ------------------------------------------------------------------------ [INFO] BUILD SUCCESS [INFO] ------------------------------------------------------------------------ [INFO] Total time: 01:06 min [INFO] Finished at: 2020-06-26T09:43:21-04:00 [INFO] ------------------------------------------------------------------------
After several minutes, the Eclair package will be built. You will find the Eclair server node under eclair-node/target, packaged as a zip file. Unzip and run it, by following the instructions here:
Congratulations, you have built Eclair from source and you are ready to code, test, bug fix, and contribute to this project!
Our final example, in this section, will bring together all the various containers we have built to form a Lightning network made of diverse (LND, c-lightning, Eclair) node implementations. We will compose the network by connecting the nodes together, opening channels from one node to another, and finally, by routing a payment across these channels.
In this example, we will replicate the Lighting network example from [routing_on_a_network_of_payment_channels]. Specifically, we will create four Lightning nodes named Alice, Bob, Wei and Gloria. We will connect Alice to Bob, Bob to Wei, and Wei to Gloria. Finally, we will have Gloria create an invoice and have Alice pay that invoice. Since Alice and Gloria are not directly connected, the payment will be routed as an HTLC across all the payment channels.
To make this example work, we will be using a container orchestration tool and command called docker-compose. This command allows us to specify an application composed of several containers, and run the application by launching all the containers together.
First, let’s install docker-compose. The instructions depend on your operating system and can be found here:
Once you’ve completed installation, you can confirm you have docker-compose by running:
$ docker-compose version docker-compose version 1.21.0, build unknown [...]
The most common docker-compose commands we will use are up, and down, for example by typing docker-compose up.
The configuration file for docker-compose is found in the code/docker directory and is named docker-compose.yml. It contains a specification for a network and each of the four containers, and looks like this:
version: "3.3"
networks:
lnnet:
services:
bitcoind:
container_name: bitcoind
build:
context: bitcoind
image: lnbook/bitcoind:latest
networks:
- lnnet
expose:
- "18443"
- "12005"
- "12006"
Alice:
container_name: Alice
The fragment above defines a network called lnnet and a container called bitcoind which will attach to the lnnet network. The container is the same one we built at the beginning of this chapter. We expose three of the container’s ports, which allows us to send commands to it and monitor blocks and transactions. Next, the configuration specifies an LND container called "Alice". Further down you will also see specifications for containers called "Bob" (c-lightning), "Wei" (Eclair) and "Gloria" (LND again).
Since all these diverse implementations follow the Basis of Lightning Technologies (BOLT) specification and have been extensively tested for interoperability, they have no difficulty working together to build a Lightning network.
Before we get started, we should make sure we’re not already running any of the containers, because if the new containers share the same name as one that is already running, they will fail to launch. Use docker ps, docker stop and docker rm as necessary to clean up!
|
Tip
|
Because we use the same names for these docker containers, we might need to "clean up", to avoid any name conflicts. |
To start the example, we switch to the directory that contains the docker-compose.yml configuration file and we issue the command docker-compose up:
$ cd code/docker $ docker-compose up Creating network "docker_lnnet" with the default driver Creating Wei ... done Creating Bob ... done Creating Gloria ... done Creating Alice ... done Creating bitcoind ... done Attaching to Wei, Bob, Gloria, Alice, bitcoind Bob | Waiting for bitcoind to start... Wei | Waiting for bitcoind to start... Alice | Waiting for bitcoind to start... Gloria | Waiting for bitcoind to start... bitcoind | Starting bitcoind... [...]
Following the start up, you will see a whole stream of log files as each of the nodes starts up and reports its progress. It may look quite jumbled on your screen, but each output line is prefixed by the container name, as you see above. If you wanted to watch the logs from only one container, you can do so in another terminal window, by using the docker-compose logs command with the f (follow) flag and the specific container name:
$ docker-compose logs -f Alice
Our Lightning network should now be running. As we saw in the previous sections of this chapter, we can issue commands to a running docker container with the docker exec command. Regardless of whether we started the container with docker run or started a bunch of them with docker-compose up, we can still access containers individually using the docker commands.
To make things easier, we have a little helper script that sets up the network, issues the invoice and makes the payment. The script is called setup-channels.sh and is a Bash shell script. Keep in mind, this script is not very sophisticated! It "blindly" throws commands at the various nodes and doesn’t do any error checking. If the network is running correctly and the nodes are funded, then it all works nicely. But, you have to wait a bit for everything to boot up and for the network to mine a few blocks and settle down. This usually takes 1-3 minutes. Once you see the block height at 102 or above on each of the nodes, you are ready. If the script fails, you can stop everything (docker-compose down) and try again from the beginning, or you can manually issue the commands in the script one by one and look at the results.
|
Tip
|
Beofre running the setup-channels script: Wait a minute or two after starting the network with docker-compose, to make sure all the services are running and all the wallets are funded. To keep things simple, the script doesn’t check whether the containers are "ready". Be patient! |
Let’s run the script to see its effect and then we will look at how it works internally. We use bash to run it as a command:
$ cd code/docker $ bash setup-channels.sh Getting node IDs Alice: 02c93da7a0a341d28e6d7742721a7d182f878e0c524e3666d80a58e1406d6d9391 Bob: 0343b8f8d27a02d6fe688e3596b2d0834c576672e8750106540617b6d5755c812b Wei: 03e17cbc7b46d553bade8687310ee0726e40dfa2c629b8b85ca5d888257757edc1 Gloria: 038c9dd0f0153cba3089616836936b2dad9ea7f97ef839f5fbca3a808d232db77b Setting up channels... Alice to Bob Bob to Wei Wei to Gloria Get 10k sats invoice from Gloria Gloria invoice lnbcrt100u1p00w5sypp5fw2gk98v6s4s2ldfwxa6jay0yl3f90j82kv6xx97jfwpa3s964vqdqqcqzpgsp5jpasdchlcx85hzfp9v0zc7zqs9sa3vyasj3nm0t4rsufrl7xge6s9qy9qsqpdd5d640agrhqe907ueq8n8f5h2p42vpheuzen58g5fwz94jvvnrwsgzd89v70utn4d7k6uh2kvp866zjgl6g85cxj6wtvdn89hllvgpflrnex Wait for channel establishment - 60 seconds for 6 blocks
As you can see from the output, the script first gets the node IDs (public keys) for each of the four nodes. Then, it connects the nodes and sets up a 1,000,000 satoshi channel from each node to the next in the network.
Looking inside the script, we see the part that gets all the node IDs and stores them in temporary variables so that they can be used in subsequent command. It looks like this:
alice_address=$(docker-compose exec -T Alice lncli -n regtest getinfo | jq .identity_pubkey) bob_address=$(docker-compose exec -T Bob lightning-cli getinfo | jq .id) wei_address=$(docker-compose exec -T Wei eclair-cli -s -j -p eclair getinfo| jq .nodeId) gloria_address=$(docker-compose exec -T Gloria lncli -n regtest getinfo | jq .identity_pubkey)
If you have followed the first part of the chapter you will recognise these commands and be able to "decipher" their meaning. It looks quite complex, but we will walk through it step-by-step and you’ll quickly get the hang of it.
The first command, for example, sets up a variable called alice_address that is the output of a docker-compose exec command. The T flag tells docker-compose to not open an interactive terminal (an interactive terminal may mess up the output with things like color-coding of results). The exec command is directed to the Alice container and runs the lncli utility, since Alice is an LND node. The lncli command must be told that it is operating on the regtest network and will then issue the getinfo command to LND. The output from getinfo is a JSON-encoded object, which we can parse by piping the output to the jq command. The jq command selects the identity_pubkey field from the JSON object. The contents of the identity_pubkey field are then output and stored in alice_address.
The following three lines do the same for each of the other nodes. Because they are different node implementations (c-lightning, Eclair), their command-line interface is slightly different, but the general principle is the same: Use the command utility to ask the node for it’s public key (node ID) information and parse it with jq, storing it in a variable for further use later.
Next, we tell each node to establish a network connection to the next node and open a channel:
docker-compose exec -T Alice lncli -n regtest connect ${bob_address}@Bob
docker-compose exec -T Alice lncli -n regtest openchannel ${bob_address} 1000000
Both of the commands are directed to the Alice container, since the channel will be opened from Alice to Bob, and Alice will initiate the connection.
As you can see, in the first command we tell Alice to connect to the Bob node. It’s node ID is stored in ${bob_address} and it’s IP address can be resolved from the name Bob (hence @Bob as the network identifier/address). We do not need to add the port number (9375) because we are using the default Lightning ports.
Next, now that Alice is connected, we open a 1,000,000 satoshi channel to Bob with the openchannel command. Again, we refer to Bob’s node by the node ID (i.e. public key).
We do the same with the other nodes, setting up connections and channels. Each node type has a slightly different syntax for these commands, but the overall principle is the same:
To Bob’s node (c-lightning), we send the command:
lightning-cli connect ${wei_address}@Wei
lightning-cli fundchannel ${wei_address} 1000000
To Wei’s node (Eclair), we send:
eclair-cli -p eclair connect --uri=${gloria_address}@Gloria
eclair-cli -p eclair open --nodeId=${gloria_address} --fundingSatoshis=1000000
Now, on Gloria’s node, we create a new invoice, for 10,000 satoshi:
lncli -n regtest addinvoice 10000 | jq .payment_request
The addinvoice command creates an invoice for the specified amount (in satoshis) and produces a JSON object with the invoice details. From that JSON object, we only need the actual bech32-encoded payement request, and we use jq to extract it.
Next, we have to wait. We just created a bunch of channels, which means that our nodes broadcast a bunch of funding transactions. The channels can’t be used until the funding transactions are mined with 6 confirmations. Since our Bitcoin regtest blockchain is set to mine blocks every ten seconds, we have to wait 60 seconds for all the channels to be ready to use.
The final command is the actual payment. We connect to Alice’s node and present Gloria’s invoice for payment.
lncli -n regtest payinvoice --json --inflight_updates -f ${gloria_invoice}
We ask Alice’s node to pay the invoice, but also ask for inflight_updates in json format. That will give us detailed output about the invoice, the route, the HTLCs and the final payment result, so we can study and learn!
Since Alice’s node doesn’t have a direct channel to Gloria, her node has to find a route. There’s only one viable route here (Alice→Bob→Wei→Gloria), which Alice will be able to discover now that all the channels are active and have been advertised to all the nodes by the Lightning gossip protocol. Alice’s node will construct the route and create an onion packet to establish HTLCs across the channels. All of this happens in a fraction of a second and Alice’s node will report the result of the payment attempt. If all goes well, you will see the last line of the JSON output showing:
"failure_reason": "FAILURE_REASON_NONE"
Arguably, this is a weird message, but technically if there is no failure reason, it is a success!
Scrolling above that funny message you will see all the details of the payment. There’s a lot to review, but as you gain understanding of the underlying technology, more and more of that information will become clear. Come back to this example later.
Of course, you could do a lot more with this test network than a 3-channel, 4-node payment. Here are some ideas for your experiments:
-
Create a more complex network by launching many more nodes of different types. Edit the docker-compose.yml file and copy sections, renaming as needed.
-
Connect the nodes in more complex topologies: circular routes, hub-and-spoke, full mesh
-
Run lots of payments to exhaust channel capacity. Then run payments in the opposite direction to rebalance the channels. See how the routing algorithm adapts.
-
Change the channel fees to see how the routing algorithm negotiates multiple routes and what optimizations it applies. Is a cheap long route better than an expensive short route?
-
Run a circular payment from a node back to itself, in order to rebalance it’s own channels. See how that affects all the other channels and nodes.
-
Generate hundreds or thousands of small invoices in a loop and then pay them as fast as possible in another loop. See how many transactions per second you can squeeze out of this test network.