Push rpi-4.19.y-rt to v4.19.127-rt55 #3736
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit f87d1c9 upstream. I goofed when I added mm->user_ns support to would_dump. I missed the fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and binfmt_script bprm->file is reassigned. Which made the move of would_dump from setup_new_exec to __do_execve_file before exec_binprm incorrect as it can result in would_dump running on the script instead of the interpreter of the script. The net result is that the code stopped making unreadable interpreters undumpable. Which allows them to be ptraced and written to disk without special permissions. Oops. The move was necessary because the call in set_new_exec was after bprm->mm was no longer valid. To correct this mistake move the misplaced would_dump from __do_execve_file into flos_old_exec, before exec_mmap is called. I tested and confirmed that without this fix I can attach with gdb to a script with an unreadable interpreter, and with this fix I can not. Cc: stable@vger.kernel.org Fixes: f84df2a ("exec: Ensure mm->user_ns contains the execed files") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cec9d10 upstream. The following changes prevent the unrecoverable freezes and rcu_sched stall warnings experienced in each of my attempts to take advantage of lima. Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a COMPOSITE that retains the selection of HDMIPHY as the PLL source, but instead makes uses of the aclk_gpu PLL source gate and parent names defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p. Remove the now unused mux_aclk_gpu_pre_p and the four named but also unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu) of the aclk_gpu PLL source gate. Use the correct gate offset for aclk_gpu and aclk_gpu_noc. Fixes: 307a2e9 ("clk: rockchip: add clock controller for rk3228") Cc: stable@vger.kernel.org Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za> [double-checked against SoC manual and added fixes tag] Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.za Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00e2176 upstream. The check for the HWO flag in dwc3_gadget_ep_reclaim_trb_sg() causes us to break out of the loop before we call dwc3_gadget_ep_reclaim_completed_trb(), which is what likely should be clearing the HWO flag. This can cause odd behavior where we never reclaim all the trbs in the sg list, so we never call giveback on a usb req, and that will causes transfer stalls. This effectively resovles the adb stalls seen on HiKey960 after userland changes started only using AIO in adbd. Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com> Cc: Yang Fei <fei.yang@intel.com> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: Tejas Joglekar <tejas.joglekar@synopsys.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Jack Pham <jackp@codeaurora.org> Cc: Josh Gao <jmgao@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org raspberrypi#4.20+ Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…'net2272_plat_probe()' commit ccaef7e upstream. 'dev' is allocated in 'net2272_probe_init()'. It must be freed in the error handling path, as already done in the remove function (i.e. 'net2272_plat_remove()') Fixes: 90fccb5 ("usb: gadget: Gadget directory cleanup - group UDC drivers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 19b94c1 upstream. If 'usb_otg_descriptor_alloc()' fails, we must return an error code, not 0. Fixes: 56023ce ("usb: gadget: audio: allocate and init otg descriptor by otg capabilities") Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e27d4b3 upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: 1156e91 ("usb: gadget: ncm: allocate and init otg descriptor by otg capabilities") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8f7f9e upstream. If 'usb_otg_descriptor_alloc()' fails, we must return a negative error code -ENOMEM, not 0. Fixes: ab6796a ("usb: gadget: cdc2: allocate and init otg descriptor by otg capabilities") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f41224e upstream. This reverts commit 3b36b13. Enable power save node breaks some systems with ACL225. Revert the patch and use a platform specific quirk for the original issue isntead. Fixes: 3b36b13 ("ALSA: hda/realtek: Fix pop noise on ALC225") BugLink: https://bugs.launchpad.net/bugs/1875916 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200503152449.22761-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 018d467 upstream. On failing to prepare or enable a clock, remove the core structure from the list it has been inserted as it is about to be freed. This otherwise leads to random crashes when subsequent clocks get registered, during which parsing of the clock tree becomes adventurous. Observed with QEMU's RPi-3 emulation. Fixes: 12ead77 ("clk: Don't try to enable critical clocks if prepare failed") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Link: https://lkml.kernel.org/r/20200505140953.409430-1-maz@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…328 boards commit 83b9941 upstream. In some board device tree files, "rk805" was used for the RK805 PMIC's node name. However the policy for device trees is that generic names should be used. Replace the "rk805" node name with the generic "pmic" name. Fixes: 1e28037 ("arm64: dts: rockchip: add rk805 node for rk3328-evb") Fixes: 955bebd ("arm64: dts: rockchip: add rk3328-rock64 board") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-3-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…happy commit 190c7f6 upstream. The device tree compiler complains that the dwc3 nodes have regs properties but no matching unit addresses. Add the unit addresses to the device node name. While at it, also rename the nodes from "dwc3" to "usb", as guidelines require device nodes have generic names. Fixes: 7144224 ("arm64: dts: rockchip: support dwc3 USB for rk3399") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200327030414.5903-7-wens@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f739fd upstream. The R-Mobile APE6 Compare Match Timer 1 generates 8 interrupts, one for each channel, but currently only 1 is described. Fix this by adding the missing interrupts. Fixes: f7b6523 ("ARM: shmobile: r8a73a4: Add CMT1 node") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200408090926.25201-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4d71c6 upstream. Missing the renesas,ipmmu-main property on ipmmu_vip[01] nodes. Fixes: 55697cb ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1587108543-23786-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e47cb97 upstream. The Clock Pulse Generator (CPG) device node lacks the extal2 clock. This may lead to a failure registering the "r" clock, or to a wrong parent for the "usb24s" clock, depending on MD_CK2 pin configuration and boot loader CPG_USBCKCR register configuration. This went unnoticed, as this does not affect the single upstream board configuration, which relies on the first clock input only. Fixes: d9ffd58 ("ARM: shmobile: r8a7740: add SoC clocks to DTS") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200508095918.6061-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4e0e4a upstream. Bank_num is a one-based count of banks, not a zero-based index. It overflows the allocated space only when strictly greater than KVM_MAX_MCE_BANKS. Fixes: a9e38c3 ("KVM: x86: Catch potential overrun in MCE setup") Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Message-Id: <20200511225616.19557-1-jmattson@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b111213 upstream. gcc-10 will rename --param=allow-store-data-races=0 to -fno-allow-store-data-races. The flag change happened at https://gcc.gnu.org/PR92046. Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Thomas Backlund <tmb@mageia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the 4.19.121 stable release
This is the 4.19.122 stable release
This is the 4.19.123 stable release
This is the 4.19.124 stable release
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
commit d08965a upstream. UBSAN can insert extra code in random locations; including AC=1 sections. Typically this code is not safe and needs wrapping. So far, only __ubsan_handle_type_mismatch* have been observed in AC=1 sections and therefore only those are annotated. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> [stable backport: only take the lib/Makefile change to resolve gcc-10 build issues] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit af700ea upstream. objtool points out several conditions that it does not like, depending on the combination with other configuration options and compiler variants: stack protector: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0xbf: call to __stack_chk_fail() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0xbe: call to __stack_chk_fail() with UACCESS enabled stackleak plugin: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x4a: call to stackleak_track_stack() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x4a: call to stackleak_track_stack() with UACCESS enabled kasan: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x25: call to memcpy() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x25: call to memcpy() with UACCESS enabled The stackleak and kasan options just need to be disabled for this file as we do for other files already. For the stack protector, we already attempt to disable it, but this fails on clang because the check is mixed with the gcc specific -fno-conserve-stack option. According to Andrey Ryabinin, that option is not even needed, dropping it here fixes the stackprotector issue. Link: http://lkml.kernel.org/r/20190722125139.1335385-1-arnd@arndb.de Link: https://lore.kernel.org/lkml/20190617123109.667090-1-arnd@arndb.de/t/ Link: https://lore.kernel.org/lkml/20190722091050.2188664-1-arnd@arndb.de/t/ Fixes: d08965a ("x86/uaccess, ubsan: Fix UBSAN vs. SMAP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1413ef6 upstream. The struct cdev is embedded in the struct i2c_dev. In the current code, we would free the i2c_dev struct directly in put_i2c_dev(), but the cdev is manged by a kobject, and the release of it is not predictable. So it is very possible that the i2c_dev is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 19 PID: 1 at lib/debugobjects.c:325 debug_print_object+0xb0/0xf0 Modules linked in: CPU: 19 PID: 1 Comm: swapper/0 Tainted: G W 5.2.20-yocto-standard+ raspberrypi#120 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80c00089 (Nzcv daIf +PAN +UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff00001292f7d0 x29: ffff00001292f7d0 x28: ffff800b82151788 x27: 0000000000000001 x26: ffff800b892c0000 x25: ffff0000124a2558 x24: 0000000000000000 x23: ffff00001107a1d8 x22: ffff0000116b5088 x21: ffff800bdc6afca8 x20: ffff000012471ae8 x19: ffff00001168f2c8 x18: 0000000000000010 x17: 00000000fd6f304b x16: 00000000ee79de43 x15: ffff800bc0e80568 x14: 79616c6564203a74 x13: 6e6968207473696c x12: 5f72656d6974203a x11: ffff0000113f0018 x10: 0000000000000000 x9 : 000000000000001f x8 : 0000000000000000 x7 : ffff0000101294cc x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : 387fc15c8ec0f200 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 __debug_check_no_obj_freed+0x19c/0x228 debug_check_no_obj_freed+0x1c/0x28 kfree+0x250/0x440 put_i2c_dev+0x68/0x78 i2cdev_detach_adapter+0x60/0xc8 i2cdev_notifier_call+0x3c/0x70 notifier_call_chain+0x8c/0xe8 blocking_notifier_call_chain+0x64/0x88 device_del+0x74/0x380 device_unregister+0x54/0x78 i2c_del_adapter+0x278/0x2d0 unittest_i2c_bus_remove+0x3c/0x80 platform_drv_remove+0x30/0x50 device_release_driver_internal+0xf4/0x1c0 driver_detach+0x58/0xa0 bus_remove_driver+0x84/0xd8 driver_unregister+0x34/0x60 platform_driver_unregister+0x20/0x30 of_unittest_overlay+0x8d4/0xbe0 of_unittest+0xae8/0xb3c do_one_initcall+0xac/0x450 do_initcall_level+0x208/0x224 kernel_init_freeable+0x2d8/0x36c kernel_init+0x18/0x108 ret_from_fork+0x10/0x1c irq event stamp: 3934661 hardirqs last enabled at (3934661): [<ffff00001009fa04>] debug_exception_exit+0x4c/0x58 hardirqs last disabled at (3934660): [<ffff00001009fb14>] debug_exception_enter+0xa4/0xe0 softirqs last enabled at (3934654): [<ffff000010081d94>] __do_softirq+0x46c/0x628 softirqs last disabled at (3934649): [<ffff0000100b4a1c>] irq_exit+0x104/0x118 This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09 ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the i2c_dev, and use the API provided by the commit 233ed09 to make sure that the release of i2c_dev and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d80b64f upstream. When kmalloc memory for sd->sev_vmcbs failed, we forget to free the page held by sd->save_area. Also get rid of the var r as '-ENOMEM' is actually the only possible outcome here. Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c749bb2 upstream. The current max_pfn equals to zero. In this case, I found it caused users cannot get some page information through /proc such as kpagecount in v5.6 kernel because of new sanity checks. The following message is displayed by stress-ng test suite with the command "stress-ng --verbose --physpage 1 -t 1" on HiFive unleashed board. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [109] 4 processors online, 4 processors configured stress-ng: info: [109] dispatching hogs: 1 physpage stress-ng: debug: [109] cache allocate: reducing cache level from L3 (too high) to L0 stress-ng: debug: [109] get_cpu_cache: invalid cache_level: 0 stress-ng: info: [109] cache allocate: using built-in defaults as no suitable cache found stress-ng: debug: [109] cache allocate: default cache size: 2048K stress-ng: debug: [109] starting stressors stress-ng: debug: [109] 1 stressor spawned stress-ng: debug: [110] stress-ng-physpage: started [110] (instance 0) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd34de000 in /proc/kpagecount, errno=0 (Success) stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) ... stress-ng: error: [110] stress-ng-physpage: cannot read page count for address 0x3fd32db078 in /proc/kpagecount, errno=0 (Success) stress-ng: debug: [110] stress-ng-physpage: exited [110] (instance 0) stress-ng: debug: [109] process [110] terminated stress-ng: info: [109] successful run completed in 1.00s # After applying this patch, the kernel can pass the test. # stress-ng --verbose --physpage 1 -t 1 stress-ng: debug: [104] 4 processors online, 4 processors configured stress-ng: info: [104] dispatching hogs: 1 physpage stress-ng: info: [104] cache allocate: using defaults, can't determine cache details from sysfs stress-ng: debug: [104] cache allocate: default cache size: 2048K stress-ng: debug: [104] starting stressors stress-ng: debug: [104] 1 stressor spawned stress-ng: debug: [105] stress-ng-physpage: started [105] (instance 0) stress-ng: debug: [105] stress-ng-physpage: exited [105] (instance 0) stress-ng: debug: [104] process [105] terminated stress-ng: info: [104] successful run completed in 1.01s # Cc: stable@vger.kernel.org Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Yash Shah <yash.shah@sifive.com> Tested-by: Yash Shah <yash.shah@sifive.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> [Palmer: back-ported to 4.19] Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0014cc0 ] Commit a408e4a ("ima: open a new file instance if no read permissions") tries to create a new file descriptor to calculate a file digest if the file has not been opened with O_RDONLY flag. However, if a new file descriptor cannot be obtained, it sets the FMODE_READ flag to file->f_flags instead of file->f_mode. This patch fixes this issue by replacing f_flags with f_mode as it was before that commit. Cc: stable@vger.kernel.org # 4.20.x Fixes: a408e4a ("ima: open a new file instance if no read permissions") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53de3b0 ] This patch avoids a kernel panic due to accessing an error pointer set by crypto_alloc_shash(). It occurs especially when there are many files that require an unsupported algorithm, as it would increase the likelihood of the following race condition: Task A: *tfm = crypto_alloc_shash() <= error pointer Task B: if (*tfm == NULL) <= *tfm is not NULL, use it Task B: rc = crypto_shash_init(desc) <= panic Task A: *tfm = NULL This patch uses the IS_ERR_OR_NULL macro to determine whether or not a new crypto context must be created. Cc: stable@vger.kernel.org Fixes: d46eb36 ("evm: crypto hash replaced by shash") Co-developed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com> Signed-off-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e3a34e ] This patch fixes the return value of ima_write_policy() when a new policy is directly passed to IMA and the current policy requires appraisal of the file containing the policy. Currently, if appraisal is not in ENFORCE mode, ima_write_policy() returns 0 and leads user space applications to an endless loop. Fix this issue by denying the operation regardless of the appraisal mode. Cc: stable@vger.kernel.org # 4.10.x Fixes: 19f8a84 ("ima: measure and appraise the IMA policy itself") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Krzysztof Struczynski <krzysztof.struczynski@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 770f605 ] This patch fixes the following warning and few other instances of traversal of evm_config_xattrnames list: [ 32.848432] ============================= [ 32.848707] WARNING: suspicious RCU usage [ 32.848966] 5.7.0-rc1-00006-ga8d5875ce5f0b raspberrypi#1 Not tainted [ 32.849308] ----------------------------- [ 32.849567] security/integrity/evm/evm_main.c:231 RCU-list traversed in non-reader section!! Since entries are only added to the list and never deleted, use list_for_each_entry_lockless() instead of list_for_each_entry_rcu for traversing the list. Also, add a relevant comment in evm_secfs.c to indicate this fact. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> (RCU viewpoint) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d4c797 ] Use a mutex to protect access to idev->msg_len, idev->buf, etc. which are modified by both altr_i2c_xfer_msg() and altr_i2c_isr(). This is the minimal fix for easy backporting. A cleanup to remove the spinlock will be added later. Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp> Acked-by: Thor Thayer <thor.thayer@linux.intel.com> [wsa: updated commit message] Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7110a2 ] When building with Clang + -Wtautological-compare and CONFIG_CPUMASK_OFFSTACK unset: arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare] if (downed_cpus == NULL && ^~~~~~~~~~~ ~~~~ arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus' equal to a null pointer is always false [-Wtautological-pointer-compare] if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0) ^~~~~~~~~~~ ~~~~ 2 warnings generated. Commit f7e30f0 ("cpumask: Add helper cpumask_available()") added cpumask_available() to fix warnings of this nature. Use that here so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's value. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: ClangBuiltLinux/linux#982 Link: https://lkml.kernel.org/r/20200408205323.44490-1-natechancellor@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef01cee ] In bmac_get_station_address, We're reading two bytes at a time from ROM, but we do that six times, resulting in 12 bytes of read & writes. This means we will write off the end of the six-byte destination buffer. This change fixes the for-loop to only read/write six bytes. Based on a proposed fix from Finn Thain <fthain@telegraphics.com.au>. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reported-by: Stan Johnson <userm57@yahoo.com> Tested-by: Stan Johnson <userm57@yahoo.com> Reported-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a3f610 ] Add a quirk for the Oculus Rift S OVR0012 display so it shows up as a non-desktop display. Signed-off-by: Jan Schmidt <jan@centricular.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200507180628.740936-1-jan@centricular.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac8372f ] On s390, the layout of normal and large ptes (i.e. pmds/puds) differs. Therefore, set_huge_pte_at() does a conversion from a normal pte to the corresponding large pmd/pud. So, when converting an empty pte, this should result in an empty pmd/pud, which would return true for pmd/pud_none(). However, after conversion we also mark the pmd/pud as large, and therefore present. For empty ptes, this will result in an empty pmd/pud that is also marked as large, and pmd/pud_none() would not return true. There is currently no issue with this behaviour, as set_huge_pte_at() does not seem to be called for empty ptes. It would be valid though, so let's fix this by not marking empty ptes as large in set_huge_pte_at(). This was found by testing a patch from from Anshuman Khandual, which is currently discussed on LKML ("mm/debug: Add more arch page table helper tests"). Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e274832 ] In null_init_zone_dev() check if the zone size is larger than device capacity, return error if needed. This also fixes the following oops :- null_blk: changed the number of conventional zones to 4294967295 BUG: kernel NULL pointer dereference, address: 0000000000000010 PGD 7d76c5067 P4D 7d76c5067 PUD 7d240c067 PMD 0 Oops: 0002 [raspberrypi#1] SMP NOPTI CPU: 4 PID: 5508 Comm: nullbtests.sh Tainted: G OE 5.7.0-rc4lblk-fnext0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e4 RIP: 0010:null_init_zoned_dev+0x17a/0x27f [null_blk] RSP: 0018:ffffc90007007e00 EFLAGS: 00010246 RAX: 0000000000000020 RBX: ffff8887fb3f3c00 RCX: 0000000000000007 RDX: 0000000000000000 RSI: ffff8887ca09d688 RDI: ffff888810fea510 RBP: 0000000000000010 R08: ffff8887ca09d688 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8887c26e8000 R13: ffffffffa05e9390 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fcb5256f740(0000) GS:ffff888810e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000081e8fe000 CR4: 00000000003406e0 Call Trace: null_add_dev+0x534/0x71b [null_blk] nullb_device_power_store.cold.41+0x8/0x2e [null_blk] configfs_write_file+0xe6/0x150 vfs_write+0xba/0x1e0 ksys_write+0x5f/0xe0 do_syscall_64+0x60/0x250 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x7fcb51c71840 Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79dde73 ] ugeth_quiesce/activate are used to halt the controller when there is a link change that requires to reconfigure the mac. The previous implementation called netif_device_detach(). This however causes the initial activation of the netdevice to fail precisely because it's detached. For details, see [1]. A possible workaround was the revert of commit net: linkwatch: add check for netdevice being present to linkwatch_do_dev However, the check introduced in the above commit is correct and shall be kept. The netif_device_detach() is thus replaced with netif_tx_stop_all_queues() that prevents any tranmission. This allows to perform mac config change required by the link change, without detaching the corresponding netdevice and thus not preventing its initial activation. [1] https://lists.openwall.net/netdev/2020/01/08/201 Signed-off-by: Valentin Longchamp <valentin@longchamp.me> Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a96ac8a ] The ipq806x_gmac_probe() function enables the PTP clock but not the appropriate interface clocks. This means that if the bootloader hasn't done so attempting to bring up the interface will fail with an error like: [ 59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma [ 59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed [ 59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed This patch, a slightly cleaned up version of one posted by Sergey Sergeev in: https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257 correctly enables the clock; we have already configured the source just before this. Tested on a MikroTik RB3011. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 539d39a ] Remove runtime PM usage counter decrement when the increment function has not been called to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is the 4.19.125 stable release
This is the 4.19.126 stable release
This is the 4.19.127 stable release
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
[ Upstream commit 279f90ddf53cd6bd3c203fbbf488d642ea2603de ] Include the swait.h header so it compiles even if not all patches are applied. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Tom Zanussi <zanussi@kernel.org> Conflicts: fs/proc/base.c
[ Upstream commit 23a2c31b19e99beaf5107071b0f32a596202cdae ]
After commit f0b231101c94 ("mm/SLUB: delay giving back empty slubs to
IRQ enabled regions"), when the free_slab() is invoked with the IRQ
disabled, the empty slubs are moved to a per-CPU list and will be
freed after IRQ enabled later. But in the current codes, there is
a check to see if there really has the cpu slub on a specific cpu
before flushing the delayed empty slubs, this may cause a reference
of already released kmem_cache in a scenario like below:
cpu 0 cpu 1
kmem_cache_destroy()
flush_all()
--->IPI flush_cpu_slab()
flush_slab()
deactivate_slab()
discard_slab()
free_slab()
c->page = NULL;
for_each_online_cpu(cpu)
if (!has_cpu_slab(1, s))
continue
this skip to flush the delayed
empty slub released by cpu1
kmem_cache_free(kmem_cache, s)
kmalloc()
__slab_alloc()
free_delayed()
__free_slab()
reference to released kmem_cache
Fixes: f0b231101c94 ("mm/SLUB: delay giving back empty slubs to IRQ enabled regions")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable-rt@vger.kernel.org
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
commit 62d0a2a (tasklet: Address a race resulting in double-enqueue) addresses a problem that can result in a tasklet being enqueued on two cpus at the same time by combining the RUN flag with a new CHAINED flag, and relies on the combination to be present in order to zero it out, which can never happen on (!SMP and !PREEMPT_RT_FULL) because the RUN flag is SMP/PREEMPT_RT_FULL-only. So make sure the above commit is only applied for the SMP || PREEMPT_RT_FULL case. Fixes: 62d0a2a ("tasklet: Address a race resulting in double-enqueue") Signed-off-by: Tom Zanussi <zanussi@kernel.org> Reported-by: Ramon Fried <rfried.dev@gmail.com> Tested-By: Ramon Fried <rfried.dev@gmail.com>
Reading data over i2c is done by using i2c_transfer to ensure that this operation can't be interrupted. Signed-off-by: Markus Proeller <markus.proeller@pieye.org>
Changed some variable names to comply with checkpatch --strict mode. Debug messages added. Signed-off-by: Markus Proeller <markus.proeller@pieye.org>
Instead of changing the exposure and framerate settings for all sequences, they can be changed for every sequence individually now. Therefore the IRS1125_CID_SAFE_RECONFIG ctrl has been removed and replaced by IRS1125_CID_SAFE_RECONFIG_S<seq_num>_EXPO and *_FRAME ctrls. The consistency check in the sequence ctrl IRS1125_CID_SEQ_CONFIG is removed. Signed-off-by: Markus Proeller <markus.proeller@pieye.org>
When closing the video device, the irs1125 is put in power down state. To keep V4L2 ctrls and the HW in sync, v4l2_ctrl_handler_setup is called after power up. The compound ctrl IRS1125_CID_MOD_PLL however has a default value of all zeros, which puts the imager into a non responding state. Thus, this ctrl is not written by the driver into HW after power up. The userspace has to take care to write senseful data. Signed-off-by: Markus Proeller <markus.proeller@pieye.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
[ Upstream commit bd59b34 ] Per the spec, the BCM2835's IRQs are all disabled when coming out of power-on reset. Its IRQ driver assumes that's still the case when the kernel boots and does not perform any initialization of the registers. However the Raspberry Pi Foundation's bootloader leaves the USB interrupt enabled when handing over control to the kernel. Quiesce IRQs and the FIQ if they were left enabled and log a message to let users know that they should update the bootloader once a fixed version is released. If the USB interrupt is not quiesced and the USB driver later on claims the FIQ (as it does on the Raspberry Pi Foundation's downstream kernel), interrupt latency for all other peripherals increases and occasional lockups occur. That's because both the FIQ and the normal USB interrupt fire simultaneously: On a multicore Raspberry Pi, if normal interrupts are routed to CPU 0 and the FIQ to CPU 1 (hardcoded in the Foundation's kernel), then a USB interrupt causes CPU 0 to spin in bcm2836_chained_handle_irq() until the FIQ on CPU 1 has cleared it. Other peripherals' interrupts are starved as long. I've seen CPU 0 blocked for up to 2.9 msec. eMMC throughput on a Compute Module 3 irregularly dips to 23.0 MB/s without this commit but remains relatively constant at 23.5 MB/s with this commit. The lockups occur when CPU 0 receives a USB interrupt while holding a lock which CPU 1 is trying to acquire while the FIQ is temporarily disabled on CPU 1. At best users get RCU CPU stall warnings, but most of the time the system just freezes. Fixes: 89214f0 ("ARM: bcm2835: add interrupt controller driver") Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/f97868ba4e9b86ddad71f44ec9d8b3b7d8daa1ea.1582618537.git.lukas@wunner.de
Linux 4.19.127-rt55 Signed-off-by: Maximilian Lindner <46794237+SR4ven@users.noreply.github.com>
Applying patches from https://github.com/schnitzeltony/meta-raspi-light/tree/master/recipes-kernel/linux/files/rt Signed-off-by: Maximilian Lindner <46794237+SR4ven@users.noreply.github.com>
Signed-off-by: Maximilian Lindner <46794237+SR4ven@users.noreply.github.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Here is what I did:
rpi-4.19.yrpi-4.19.y-rtI ran 3 hours of hackbench + cyclictest on a RPi 3B+ without any stability problems.
For some reason the cyclictest worst case latencies went from about 120us on v4.19.71-rt24 to over 260us on v4.19.127-rt55 on a Pi 3b+.
Does anybody have a clue why this is?