Does not open (breaks) files created by itself

[tiket18]

За отсутствием свежего appimage собрал из исходников, с нуля в новой сборке создал эскизы, управляющие программы. Закрыл. с утра открываю - все поломано. Открываю тот же файл через аппимадж - все на месте. Открываю через аппимадж основной ветки - условно все на месте.
Блин. А теперь этот гит еще и отказывается редактировать и загружать кратинки иначе чем в немилом хроме.

For lack of fresh appimage collected from sources, from scratch in the new build created thumbnails, control programs. Closed. I open in the morning - everything is broken. I open the same file through the appimage - everything is in place. I open it through the main branch apimage - everything is in place.

[realthunder]

There is new AppImage available. Please go to the release page, and look for image with name Daily in it. The latest release is today 20201016, and it is in sync with upstream master. If you still experience any problem, please post some sample file here.

[tiket18]

В свежем appimage (как и старом) проблемы нет. Поставил пересобрку из исходников.
There is no problem with the fresh appimage (like the old one). I put a re-assembly from the sources.

[tiket18]

And yes, thanks for the fresh appimage - very helpful.

[realthunder]

As shown in your screen captured About page, your source is not in sync with my branch. I did fix related problem just today.

[tiket18]

No, the situation has not changed in the locally built program. It was compiled without errors.

[tiket18]

Here is an example of a file created from scratch

test.FCStd.zip

[tiket18]

трафареты2.FCStd.zip

17:18:43 OpenGL version is: 4.6 (4.6 (Compatibility Profile) Mesa 20.2.0)
17:18:43 Run Gui init script
17:18:43 Init: Running FreeCADGuiInit.py start script...
17:18:43 Init: Searching modules...
17:18:43 Init: Initializing /usr/lib/freecad/Mod/AddonManager... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Arch... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Draft... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Drawing... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Fem... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Idf(InitGui.py not found)... ignore
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Image... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Import... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Inspection... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Material... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Measure(InitGui.py not found)... ignore
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Mesh... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/MeshPart... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/OpenSCAD... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Part... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/PartDesign... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Path... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Points... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Raytracing... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/ReverseEngineering... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Robot... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Show(InitGui.py not found)... ignore
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Sketcher... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Spreadsheet... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Start... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Surface... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/TechDraw... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Test... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Tux... done
17:18:43 Init: Initializing /usr/lib/freecad/Mod/Web... done
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/CADExchanger... done
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/dxf_library(InitGui.py not found)... ignore
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/Assembly4... done
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/FCGear(InitGui.py not found)... ignore
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/assembly2... done
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/Lithophane... done
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/CurvedShapes... done
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/frame(InitGui.py not found)... ignore
17:18:43 Command.cpp(1839): duplicate command Nurbs_TTcreateArcSketch
17:18:43 Command.cpp(1839): duplicate command Nurbs_TTcreateLabels
17:18:43 Command.cpp(1839): duplicate command Nurbs_TTupdateLabels
17:18:43 Command.cpp(1839): duplicate command Nurbs_weighteditor
17:18:43 Command.cpp(1839): duplicate command Nurbs_LoadSketch
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/nurbs... done
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/Curves... done
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/MeshRemodel... done
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/slic3r-tools... done
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/workfeature-macro(InitGui.py not found)... ignore
17:18:43 Init: Initializing /home/memfis/.FreeCAD/Mod/A2plus... done
17:18:43 Init: Initializing freecad.asm3
17:18:43 QVTKWidgetPlugin instantiated

17:18:43 QVTKWidgetPlugin::name

17:18:43 1.312339 <asm3.main> init_gui.py(14): no solver backend found
17:18:43 Init: Initializing freecad.asm3... done
17:18:43 Init: Initializing freecad.fc_cadquery
17:18:43 Init: No init_gui module found in freecad.fc_cadquery, skipping
17:18:43 Init: Initializing freecad.frametools
17:18:43 Init: Initializing freecad.frametools... done
17:18:43 Init: Initializing freecad.gears
17:18:43 Init: Initializing freecad.gears... done
17:18:43 Init: Loading FreeCAD GUI
17:18:43 Init: Running FreeCADGuiInit.py start script... done
17:18:43 Init: Activating default workbench StartWorkbench
17:18:43 Loading GUI of Part module... done
17:18:43 Loading Sketcher module... done
17:18:43 Loading GUI of Sketcher module... done
17:18:43 Init: Showing main window
17:18:43 Main window restored
17:18:43 Show main window
17:18:43 Toolbars restored
17:18:43 Couldn't connect to spacenav daemon
17:18:43 Init: Entering event loop
17:18:43 Init: Processing command line files
17:18:43 Init: Processing file: /home/memfis/трафареты2.FCStd
17:18:43 Cannot create object 'Sketch': (call stack is not deep enough)
17:18:43 Cannot create object 'Body': (call stack is not deep enough)
17:18:43 Cannot create object 'Pad': (call stack is not deep enough)
17:18:43 Cannot create object 'Sketch001': (call stack is not deep enough)
17:18:43 Cannot create object 'Pocket': (call stack is not deep enough)

[tiket18]

11:27:49 OpenGL version is: 4.6 (4.6 (Compatibility Profile) Mesa 20.2.0)
11:27:49 Run Gui init script
11:27:49 Init: Running FreeCADGuiInit.py start script...
11:27:49 Init: Searching modules...
11:27:49 Init: Initializing /usr/lib/freecad/Mod/AddonManager... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Arch... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Draft... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Drawing... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Fem... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Idf(InitGui.py not found)... ignore
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Image... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Import... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Inspection... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Material... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Measure(InitGui.py not found)... ignore
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Mesh... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/MeshPart... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/OpenSCAD... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Part... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/PartDesign... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Path... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Points... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Raytracing... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/ReverseEngineering... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Robot... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Show(InitGui.py not found)... ignore
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Sketcher... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Spreadsheet... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Start... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Surface... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/TechDraw... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Test... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Tux... done
11:27:49 Init: Initializing /usr/lib/freecad/Mod/Web... done
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/CADExchanger... done
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/dxf_library(InitGui.py not found)... ignore
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/Assembly4... done
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/FCGear(InitGui.py not found)... ignore
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/assembly2... done
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/Lithophane... done
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/CurvedShapes... done
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/frame(InitGui.py not found)... ignore
11:27:49 Command.cpp(1839): duplicate command Nurbs_TTcreateArcSketch
11:27:49 Command.cpp(1839): duplicate command Nurbs_TTcreateLabels
11:27:49 Command.cpp(1839): duplicate command Nurbs_TTupdateLabels
11:27:49 Command.cpp(1839): duplicate command Nurbs_weighteditor
11:27:49 Command.cpp(1839): duplicate command Nurbs_LoadSketch
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/nurbs... done
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/Curves... done
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/MeshRemodel... done
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/slic3r-tools... done
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/workfeature-macro(InitGui.py not found)... ignore
11:27:49 Init: Initializing /home/memfis/.FreeCAD/Mod/A2plus... done
11:27:49 Init: Initializing freecad.asm3
11:27:49 QVTKWidgetPlugin instantiated

11:27:49 QVTKWidgetPlugin::name

11:27:49 1.354572 <asm3.main> init_gui.py(14): no solver backend found
11:27:49 Init: Initializing freecad.asm3... done
11:27:49 Init: Initializing freecad.fc_cadquery
11:27:49 Init: No init_gui module found in freecad.fc_cadquery, skipping
11:27:49 Init: Initializing freecad.frametools
11:27:49 Init: Initializing freecad.frametools... done
11:27:49 Init: Initializing freecad.gears
11:27:49 Init: Initializing freecad.gears... done
11:27:49 Init: Loading FreeCAD GUI
11:27:49 Init: Running FreeCADGuiInit.py start script... done
11:27:49 Init: Activating default workbench StartWorkbench
11:27:49 Loading GUI of Part module... done
11:27:49 Loading Sketcher module... done
11:27:49 Loading GUI of Sketcher module... done
11:27:49 Init: Showing main window
11:27:49 Main window restored
11:27:49 Show main window
11:27:49 Toolbars restored
11:27:49 Couldn't connect to spacenav daemon
11:27:49 Init: Entering event loop
11:27:49 Init: Processing command line files
11:27:49 Init: Processing file: /home/memfis/H/A_w/Темы/2017/rozetka/Кресло_шампанка2.FCStd
11:27:49 Cannot create object 'Sketch': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch002': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch005': (call stack is not deep enough)
11:27:49 Cannot create object 'Body001': (call stack is not deep enough)
11:27:49 Cannot create object 'Pad001': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch008': (call stack is not deep enough)
11:27:49 Cannot create object 'Pocket004': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch010': (call stack is not deep enough)
11:27:49 Cannot create object 'Body002': (call stack is not deep enough)
11:27:49 Cannot create object 'Pad002': (call stack is not deep enough)
11:27:49 Cannot create object 'Pocket006': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch012': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch013': (call stack is not deep enough)
11:27:49 Cannot create object 'Body003': (call stack is not deep enough)
11:27:49 Cannot create object 'Pad003': (call stack is not deep enough)
11:27:49 Cannot create object 'Pocket008': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch015': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch016': (call stack is not deep enough)
11:27:49 Cannot create object 'Body004': (call stack is not deep enough)
11:27:49 Cannot create object 'Pad004': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch017': (call stack is not deep enough)
11:27:49 Cannot create object 'Pocket010': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch018': (call stack is not deep enough)
11:27:49 Cannot create object 'Body005': (call stack is not deep enough)
11:27:49 Cannot create object 'Pad005': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch019': (call stack is not deep enough)
11:27:49 Cannot create object 'Pocket011': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch020': (call stack is not deep enough)
11:27:49 Cannot create object 'Body006': (call stack is not deep enough)
11:27:49 Cannot create object 'Pad006': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch021': (call stack is not deep enough)
11:27:49 Cannot create object 'Pocket012': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch024': (call stack is not deep enough)
11:27:49 Cannot create object 'Body007': (call stack is not deep enough)
11:27:49 Cannot create object 'Pad007': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch025': (call stack is not deep enough)
11:27:49 Cannot create object 'Pocket013': (call stack is not deep enough)
11:27:49 Cannot create object 'Fusion': (call stack is not deep enough)
11:27:49 Cannot create object 'Part__Mirroring001': (call stack is not deep enough)
11:27:49 Cannot create object 'Part__Mirroring002': (call stack is not deep enough)
11:27:49 Cannot create object 'Fusion002': (call stack is not deep enough)
11:27:49 Cannot create object 'Fusion003': (call stack is not deep enough)
11:27:49 Cannot create object 'Fusion004': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch026': (call stack is not deep enough)
11:27:49 Cannot create object 'Spreadsheet': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch027': (call stack is not deep enough)
11:27:49 Cannot create object 'Sketch028': (call stack is not deep enough)
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body001' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body002' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body003' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body004' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(1033): Lost link to _____________________________2 Body001 while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(1033): Lost link to _____________________________2 Body002 while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(1033): Lost link to _____________________________2 Body003 while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(1033): Lost link to _____________________________2 Body005 while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(1033): Lost link to _____________________________2 Body006 while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(1033): Lost link to _____________________________2 Body007 while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(1033): Lost link to _____________________________2 Body004 while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body005' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body006' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body004' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body001' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body002' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body003' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body005' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body006' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body007' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body001' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body002' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Body003' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(3666): Lost link to 'Fusion004' while loading, maybe an object was not loaded correctly
11:27:49 PropertyLinks.cpp(1033): Lost link to _____________________________2 Fusion004 while loading, maybe an object was not loaded correctly
11:27:49 4.9e-08 Document.cpp(3113): _____________________________2#Link002.LinkedObject: Link not restored
Object: Body001
11:27:49 0.000477097 Document.cpp(3113): _____________________________2#Link003.LinkedObject: Link not restored
Object: Body002
11:27:49 0.000507499 Document.cpp(3113): _____________________________2#Link004.LinkedObject: Link not restored
Object: Body003
11:27:49 0.000535004 Document.cpp(3113): _____________________________2#Link005.LinkedObject: Link not restored
Object: Body004
11:27:49 0.000567497 Document.cpp(3113): _____________________________2#Link014.LinkedObject: Link not restored
Object: Body005
11:27:49 0.000594641 Document.cpp(3113): _____________________________2#Link015.LinkedObject: Link not restored
Object: Body006
11:27:49 0.000755654 Document.cpp(3113): _____________________________2#Link032.LinkedObject: Link not restored
Object: Fusion004
11:27:49 0.0008407 Document.cpp(3113): _____________________________2#Link018.LinkedObject: Link not restored
Object: Body004
11:27:49 0.000868813 Document.cpp(3113): _____________________________2#Link019.LinkedObject: Link not restored
Object: Body001
11:27:49 0.00089309 Document.cpp(3113): _____________________________2#Link020.LinkedObject: Link not restored
Object: Body002
11:27:49 0.000917222 Document.cpp(3113): _____________________________2#Link021.LinkedObject: Link not restored
Object: Body003
11:27:49 0.000941575 Document.cpp(3113): _____________________________2#Link022.LinkedObject: Link not restored
Object: Body005
11:27:49 0.000965126 Document.cpp(3113): _____________________________2#Link023.LinkedObject: Link not restored
Object: Body006
11:27:49 0.000988322 Document.cpp(3113): _____________________________2#Link024.LinkedObject: Link not restored
Object: Body007
11:27:49 0.00101206 Document.cpp(3113): _____________________________2#Link025.LinkedObject: Link not restored
Object: Body001
11:27:49 0.00103525 Document.cpp(3113): _____________________________2#Link026.LinkedObject: Link not restored
Object: Body002
11:27:49 0.00105888 Document.cpp(3113): _____________________________2#Link027.LinkedObject: Link not restored
Object: Body003

[realthunder]

11:27:49 Cannot create object 'Sketch': (call stack is not deep enough)

This type of errors are the cause. But not sure why. Are you compiling on Linux? Can you run inside gdb? Before you open
the document. CTRL+C, and then type catch throw, then continue. Open the document. When the exception occur, it will break into the debugger. type frame and post the call stack here.

[tiket18]

I don't have any experience with gdb - I installed it, ran it with gdb command, but I haven't understood yet how to run FC inside it.

But I've found out an interesting thing - the model file breaks only if you open the project file through the file manager (i.e. if you launch it with the command of -
freecad file.fcstd).
If you open the project file from the already running FC, through the Open file menu, everything works normally.

[tiket18]

2020-10-21 build for today - the problem with opening a file remains. Run in command line = broken project (you need to open the file again through the Open menu).

OS: Arch Linux (GNOME/gnome-xorg)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.25420 (Git)
Build type: Release
Branch: makepkg
Hash: dda4965
Python version: 3.8.6
Qt version: 5.15.1
Coin version: 4.0.1
OCC version: 7.4.0
Locale: Russian/Russia (ru_RU)
freecad лампа_настольная.FCStd
FreeCAD 0.19, Libs: 0.19R25420 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre and others 2001-2020
FreeCAD is free and open-source software licensed under the terms of LGPL2+ license.
FreeCAD wouldn't be possible without FreeCAD community.

#### ###

# # # #

## #### #### # # # #

# # # # # # # ##### #

# #### #### # # # #

# # # # # # # # ## ##

# #### #### ### # # #### ## ##

Loading Assembly4 WorkBench

(freecad:189785): Gtk-WARNING **: 12:34:36.794: Theme parsing error: gtk.css:4:108: Failed to import: Произошла ошибка открытия файла /home/m/.local/share/gnome-shell/extensions/no-title-bar@jonaspoehler.de/stylesheet.css: Нет такого файла или каталога

(freecad:189785): Gtk-WARNING **: 12:34:36.794: Theme parsing error: gtk.css:5:114: Failed to import: Произошла ошибка открытия файла /home/m/.local/share/gnome-shell/extensions/no-title-bar@jonaspoehler.de/stylesheet-tiled.css: Нет такого файла или каталога
Command.cpp(1839): duplicate command Std_TreePreSelection
Command.cpp(1839): duplicate command Std_TreeSelectAllInstances
1.25141 <asm3.main> init_gui.py(14): no solver backend found
connect failed: Нет такого файла или каталога
Cannot create object 'Sketch': (call stack is not deep enough)
Cannot create object 'Spreadsheet': (call stack is not deep enough)
Cannot create object 'Sketch065': (call stack is not deep enough)
Cannot create object 'Sketch066': (call stack is not deep enough)
Cannot create object 'Body013': (call stack is not deep enough)
Cannot create object 'Sketch067': (call stack is not deep enough)
Cannot create object 'Pad013': (call stack is not deep enough)
Cannot create object 'Sketch070': (call stack is not deep enough)
Cannot create object 'Sketch071': (call stack is not deep enough)
Cannot create object 'Pocket041': (call stack is not deep enough)
Cannot create object 'Sketch073': (call stack is not deep enough)
Cannot create object 'Pad015': (call stack is not deep enough)
Cannot create object 'Body015': (call stack is not deep enough)
Cannot create object 'Sketch072': (call stack is not deep enough)
Cannot create object 'Pad014': (call stack is not deep enough)
Cannot create object 'Body014': (call stack is not deep enough)
Cannot create object 'Part__Mirroring': (call stack is not deep enough)
Cannot create object 'Sketch064': (call stack is not deep enough)
Cannot create object 'Pad012': (call stack is not deep enough)
Cannot create object 'Body012': (call stack is not deep enough)
Cannot create object 'Sketch057': (call stack is not deep enough)
Cannot create object 'Sketch058': (call stack is not deep enough)
Cannot create object 'Sketch059': (call stack is not deep enough)
Cannot create object 'Sketch060': (call stack is not deep enough)
Cannot create object 'Sketch061': (call stack is not deep enough)
Cannot create object 'Sketch062': (call stack is not deep enough)
Cannot create object 'Body011': (call stack is not deep enough)
Cannot create object 'Sketch041': (call stack is not deep enough)
Cannot create object 'Sketch042': (call stack is not deep enough)
Cannot create object 'Sketch043': (call stack is not deep enough)
Cannot create object 'Pad009': (call stack is not deep enough)
Cannot create object 'Sketch044': (call stack is not deep enough)
Cannot create object 'Sketch046': (call stack is not deep enough)
Cannot create object 'Pocket040': (call stack is not deep enough)
Cannot create object 'Body009': (call stack is not deep enough)
Cannot create object 'Sketch025': (call stack is not deep enough)
Cannot create object 'Sketch026': (call stack is not deep enough)
Cannot create object 'Sketch027': (call stack is not deep enough)
Cannot create object 'Pad007': (call stack is not deep enough)
Cannot create object 'Pocket028': (call stack is not deep enough)
Cannot create object 'Body007': (call stack is not deep enough)
Cannot create object 'Sketch020': (call stack is not deep enough)
Cannot create object 'Sketch021': (call stack is not deep enough)
Cannot create object 'Sketch022': (call stack is not deep enough)
Cannot create object 'Pad006': (call stack is not deep enough)
Cannot create object 'Sketch023': (call stack is not deep enough)
Cannot create object 'Sketch024': (call stack is not deep enough)
Cannot create object 'Pocket013': (call stack is not deep enough)
Cannot create object 'Pocket014': (call stack is not deep enough)
Cannot create object 'Pocket015': (call stack is not deep enough)
Cannot create object 'Sketch037': (call stack is not deep enough)
Cannot create object 'Pocket026': (call stack is not deep enough)
Cannot create object 'Body006': (call stack is not deep enough)
Cannot create object 'Sketch001': (call stack is not deep enough)
Cannot create object 'Sketch002': (call stack is not deep enough)
Cannot create object 'Pad': (call stack is not deep enough)
Cannot create object 'Sketch003': (call stack is not deep enough)
Cannot create object 'Pocket': (call stack is not deep enough)
Cannot create object 'Sketch006': (call stack is not deep enough)
Cannot create object 'Sketch063': (call stack is not deep enough)
Cannot create object 'Pocket039': (call stack is not deep enough)
Cannot create object 'Body': (call stack is not deep enough)
Cannot create object 'Fusion001': (call stack is not deep enough)
Cannot create object 'Fusion002': (call stack is not deep enough)
Cannot create object 'Sketch074': (call stack is not deep enough)
Cannot create object 'Body016': (call stack is not deep enough)
Cannot create object 'Pad016': (call stack is not deep enough)
Cannot create object 'Sketch075': (call stack is not deep enough)
Cannot create object 'Pocket042': (call stack is not deep enough)
Cannot create object 'Sketch076': (call stack is not deep enough)
Cannot create object 'Pocket043': (call stack is not deep enough)
Cannot create object 'Sketch080': (call stack is not deep enough)
Cannot create object 'Pocket045': (call stack is not deep enough)
Cannot create object 'Sketch081': (call stack is not deep enough)
Cannot create object 'Pocket046': (call stack is not deep enough)
Cannot create object 'Sketch082': (call stack is not deep enough)
Cannot create object 'Sketch083': (call stack is not deep enough)
Cannot create object 'Sketch084': (call stack is not deep enough)
Cannot create object 'Pocket047': (call stack is not deep enough)
Cannot create object 'Pocket048': (call stack is not deep enough)
Cannot create object 'Pocket049': (call stack is not deep enough)
Cannot create object 'Sketch087': (call stack is not deep enough)
Cannot create object 'Pocket051': (call stack is not deep enough)
Cannot create object 'Fusion004': (call stack is not deep enough)
Cannot create object 'Sketch089': (call stack is not deep enough)
Cannot create object 'Pocket053': (call stack is not deep enough)
Cannot create object 'Sketch092': (call stack is not deep enough)
Cannot create object 'Sketch094': (call stack is not deep enough)
Cannot create object 'Body019': (call stack is not deep enough)
Cannot create object 'Sketch096': (call stack is not deep enough)
Cannot create object 'Pad019': (call stack is not deep enough)
Cannot create object 'Sketch097': (call stack is not deep enough)
Cannot create object 'Pocket057': (call stack is not deep enough)
Cannot create object 'Sketch098': (call stack is not deep enough)
Cannot create object 'Pocket058': (call stack is not deep enough)
Cannot create object 'Sketch107': (call stack is not deep enough)
Cannot create object 'Body020': (call stack is not deep enough)
Cannot create object 'Sketch108': (call stack is not deep enough)
Cannot create object 'Pad020': (call stack is not deep enough)
Cannot create object 'Sketch109': (call stack is not deep enough)
Cannot create object 'Pocket059': (call stack is not deep enough)
Cannot create object 'Sketch110': (call stack is not deep enough)
Cannot create object 'Pocket060': (call stack is not deep enough)
Cannot create object 'Body021': (call stack is not deep enough)
Cannot create object 'Pad022': (call stack is not deep enough)
Cannot create object 'Sketch112': (call stack is not deep enough)
Cannot create object 'Sketch113': (call stack is not deep enough)
Cannot create object 'Pocket061': (call stack is not deep enough)
Cannot create object 'Sketch114': (call stack is not deep enough)
Cannot create object 'Pocket062': (call stack is not deep enough)
Cannot create object 'Sketch115': (call stack is not deep enough)
Cannot create object 'Body022': (call stack is not deep enough)
Cannot create object 'Pad023': (call stack is not deep enough)
Cannot create object 'Sketch116': (call stack is not deep enough)
Cannot create object 'Sketch117': (call stack is not deep enough)
Cannot create object 'Sketch118': (call stack is not deep enough)
Cannot create object 'Sketch111': (call stack is not deep enough)
Cannot create object 'Pocket063': (call stack is not deep enough)
Cannot create object 'Pocket064': (call stack is not deep enough)
Cannot create object 'Sketch119': (call stack is not deep enough)
Cannot create object 'Pocket065': (call stack is not deep enough)
Cannot create object 'Sketch120': (call stack is not deep enough)
Cannot create object 'Pocket066': (call stack is not deep enough)
Cannot create object 'Sketch121': (call stack is not deep enough)
Cannot create object 'Pocket067': (call stack is not deep enough)
Cannot create object 'Sketch124': (call stack is not deep enough)
Cannot create object 'Body023': (call stack is not deep enough)
Cannot create object 'Pad024': (call stack is not deep enough)
Cannot create object 'Sketch125': (call stack is not deep enough)
Cannot create object 'Pocket068': (call stack is not deep enough)
Cannot create object 'Job013': (call stack is not deep enough)
Cannot create object 'Operations013': (call stack is not deep enough)
Cannot create object 'Clone013': (call stack is not deep enough)
Cannot create object 'Clone014': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4004008': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4005009': (call stack is not deep enough)
Cannot create object 'Stock013': (call stack is not deep enough)
Cannot create object 'Pocket_Shape026': (call stack is not deep enough)
Cannot create object 'Pocket_Shape027': (call stack is not deep enough)
Cannot create object 'Profile042': (call stack is not deep enough)
Cannot create object 'Profile043': (call stack is not deep enough)
Cannot create object 'Profile044': (call stack is not deep enough)
Cannot create object 'Job014': (call stack is not deep enough)
Cannot create object 'Operations014': (call stack is not deep enough)
Cannot create object 'Clone015': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4004009': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4005010': (call stack is not deep enough)
Cannot create object 'Stock014': (call stack is not deep enough)
Cannot create object 'Pocket_Shape028': (call stack is not deep enough)
Cannot create object 'Pocket_Shape029': (call stack is not deep enough)
Cannot create object 'Profile045': (call stack is not deep enough)
Cannot create object 'Profile046': (call stack is not deep enough)
Cannot create object 'Sketch126': (call stack is not deep enough)
Cannot create object 'Pocket069': (call stack is not deep enough)
Cannot create object 'Profile050': (call stack is not deep enough)
Cannot create object 'Sketch127': (call stack is not deep enough)
Cannot create object 'Pocket070': (call stack is not deep enough)
Cannot create object 'Pad025': (call stack is not deep enough)
Cannot create object 'Pocket071': (call stack is not deep enough)
Cannot create object 'Pocket072': (call stack is not deep enough)
Cannot create object 'Pocket073': (call stack is not deep enough)
Cannot create object 'Pocket074': (call stack is not deep enough)
Cannot create object 'Sketch138': (call stack is not deep enough)
Cannot create object 'Body024': (call stack is not deep enough)
Cannot create object 'Pad026': (call stack is not deep enough)
Cannot create object 'Export': (call stack is not deep enough)
Cannot create object 'Sketch139': (call stack is not deep enough)
Cannot create object 'Body025': (call stack is not deep enough)
Cannot create object 'Pad027': (call stack is not deep enough)
Cannot create object 'Job': (call stack is not deep enough)
Cannot create object 'Operations': (call stack is not deep enough)
Cannot create object 'Clone': (call stack is not deep enough)
Cannot create object 'Clone016': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4004': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4005': (call stack is not deep enough)
Cannot create object 'Stock': (call stack is not deep enough)
Cannot create object 'Profile': (call stack is not deep enough)
Cannot create object 'Profile052': (call stack is not deep enough)
Cannot create object 'Profile053': (call stack is not deep enough)
Cannot create object 'Profile054': (call stack is not deep enough)
Cannot create object 'Profile055': (call stack is not deep enough)
Cannot create object 'Profile056': (call stack is not deep enough)
Cannot create object 'DogboneDressup': (call stack is not deep enough)
Cannot create object 'Sketch141': (call stack is not deep enough)
Cannot create object 'Body026': (call stack is not deep enough)
Cannot create object 'Pad028': (call stack is not deep enough)
Cannot create object 'Sketch142': (call stack is not deep enough)
Cannot create object 'Pocket075': (call stack is not deep enough)
Cannot create object 'Sketch143': (call stack is not deep enough)
Cannot create object 'Pocket076': (call stack is not deep enough)
Cannot create object 'Sketch144': (call stack is not deep enough)
Cannot create object 'Body027': (call stack is not deep enough)
Cannot create object 'Pad029': (call stack is not deep enough)
Cannot create object 'Sketch145': (call stack is not deep enough)
Cannot create object 'Pocket077': (call stack is not deep enough)
Cannot create object 'Job015': (call stack is not deep enough)
Cannot create object 'Operations015': (call stack is not deep enough)
Cannot create object 'Clone017': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4004010': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4005011': (call stack is not deep enough)
Cannot create object 'Stock015': (call stack is not deep enough)
Cannot create object 'Pocket_3D': (call stack is not deep enough)
Cannot create object 'Profile057': (call stack is not deep enough)
Cannot create object 'Profile058': (call stack is not deep enough)
Cannot create object 'Profile059': (call stack is not deep enough)
Cannot create object 'Job016': (call stack is not deep enough)
Cannot create object 'Operations016': (call stack is not deep enough)
Cannot create object 'Clone018': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4004011': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4005012': (call stack is not deep enough)
Cannot create object 'Stock016': (call stack is not deep enough)
Cannot create object 'Pocket_3D001': (call stack is not deep enough)
Cannot create object 'Profile060': (call stack is not deep enough)
Cannot create object 'Profile061': (call stack is not deep enough)
Cannot create object 'Sketch149': (call stack is not deep enough)
Cannot create object 'Sketch147': (call stack is not deep enough)
Cannot create object 'Body030': (call stack is not deep enough)
Cannot create object 'Pad032': (call stack is not deep enough)
Cannot create object 'Pocket084': (call stack is not deep enough)
Cannot create object 'Sketch150': (call stack is not deep enough)
Cannot create object 'Body031': (call stack is not deep enough)
Cannot create object 'Pad033': (call stack is not deep enough)
Cannot create object 'Sketch151': (call stack is not deep enough)
Cannot create object 'Pocket085': (call stack is not deep enough)
Cannot create object 'Job017': (call stack is not deep enough)
Cannot create object 'Operations017': (call stack is not deep enough)
Cannot create object 'Clone019': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4004012': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4005013': (call stack is not deep enough)
Cannot create object 'Stock017': (call stack is not deep enough)
Cannot create object 'Job018': (call stack is not deep enough)
Cannot create object 'Operations018': (call stack is not deep enough)
Cannot create object 'Clone020': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4004013': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4005014': (call stack is not deep enough)
Cannot create object 'Stock018': (call stack is not deep enough)
Cannot create object 'Pocket_Shape': (call stack is not deep enough)
Cannot create object 'Profile062': (call stack is not deep enough)
Cannot create object 'Profile063': (call stack is not deep enough)
Cannot create object 'Pocket_Shape030': (call stack is not deep enough)
Cannot create object 'Profile064': (call stack is not deep enough)
Cannot create object 'Profile065': (call stack is not deep enough)
Cannot create object 'Profile066': (call stack is not deep enough)
Cannot create object 'Sketch152': (call stack is not deep enough)
Cannot create object 'Body032': (call stack is not deep enough)
Cannot create object 'Pad034': (call stack is not deep enough)
Cannot create object 'Job019': (call stack is not deep enough)
Cannot create object 'Operations019': (call stack is not deep enough)
Cannot create object 'Clone021': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4004014': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4005015': (call stack is not deep enough)
Cannot create object 'Stock019': (call stack is not deep enough)
Cannot create object 'Profile067': (call stack is not deep enough)
Cannot create object 'DogboneDressup001': (call stack is not deep enough)
Cannot create object 'Profile068': (call stack is not deep enough)
Cannot create object 'DogboneDressup002': (call stack is not deep enough)
Cannot create object 'T3__F6_32_4__': (call stack is not deep enough)
Cannot create object 'T3__F6_32_4__001': (call stack is not deep enough)
Cannot create object 'Body033': (call stack is not deep enough)
Cannot create object 'Sketch153': (call stack is not deep enough)
Cannot create object 'Revolution': (call stack is not deep enough)
Cannot create object 'Sketch155': (call stack is not deep enough)
Cannot create object 'Pocket086': (call stack is not deep enough)
Cannot create object 'Sketch156': (call stack is not deep enough)
Cannot create object 'Body035': (call stack is not deep enough)
Cannot create object 'BaseFeature': (call stack is not deep enough)
Cannot create object 'Pad036': (call stack is not deep enough)
Cannot create object 'Sketch154': (call stack is not deep enough)
Cannot create object 'Pad035': (call stack is not deep enough)
Cannot create object 'Body034': (call stack is not deep enough)
PropertyLinks.cpp(1033): Lost link to _______________________________ Body while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body006 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body007 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body009 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body011 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body012 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Part__Mirroring while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body014 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body015 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body016 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body019 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body020 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body021 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body022 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body023 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body024 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Fusion004 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Fusion001 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Fusion002 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Job014 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Job013 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body' while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body009' while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body011' while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body012' while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Part__Mirroring' while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body016' while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body007' while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body006' while loading, maybe an object was not loaded correctly
<class 'ValueError'>: call stack is not deep enough
PropertyLinks.cpp(1033): Lost link to _______________________________ Clone013 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Clone014 while loading, maybe an object was not loaded correctly
<class 'ValueError'>: call stack is not deep enough
PropertyLinks.cpp(1033): Lost link to _______________________________ Clone015 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body024' while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body025' while loading, maybe an object was not loaded correctly
<class 'ValueError'>: call stack is not deep enough
PropertyLinks.cpp(1033): Lost link to _______________________________ Clone while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Clone016 while loading, maybe an object was not loaded correctly
<class 'ValueError'>: call stack is not deep enough
PropertyLinks.cpp(1033): Lost link to _______________________________ Clone017 while loading, maybe an object was not loaded correctly
<class 'ValueError'>: call stack is not deep enough
PropertyLinks.cpp(1033): Lost link to _______________________________ Clone018 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Job while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Job015 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Job016 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Job017 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Job018 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Job019 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body026 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body027 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body025 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body030 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Body031 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body011' while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body007' while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(3666): Lost link to 'Body006' while loading, maybe an object was not loaded correctly
<class 'ValueError'>: call stack is not deep enough
PropertyLinks.cpp(1033): Lost link to _______________________________ Clone019 while loading, maybe an object was not loaded correctly
<class 'ValueError'>: call stack is not deep enough
PropertyLinks.cpp(1033): Lost link to _______________________________ Clone020 while loading, maybe an object was not loaded correctly
<class 'ValueError'>: call stack is not deep enough
PropertyLinks.cpp(1033): Lost link to _______________________________ Clone021 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to _______________________________ Sketch154 while loading, maybe an object was not loaded correctly
<class 'ValueError'>: call stack is not deep enough
<class 'ValueError'>: call stack is not deep enough
<class 'ValueError'>: call stack is not deep enough
<class 'ValueError'>: call stack is not deep enough
<class 'ValueError'>: call stack is not deep enough
<class 'ValueError'>: call stack is not deep enough
<class 'ValueError'>: call stack is not deep enough
<class 'ValueError'>: call stack is not deep enough
2.8e-08 Document.cpp(3113): _______________________________#Link.LinkedObject: Link not restored
Object: Body
0.000212195 Document.cpp(3113): _______________________________#Link003.LinkedObject: Link not restored
Object: Body009
0.000310712 Document.cpp(3113): _______________________________#Link004.LinkedObject: Link not restored
Object: Body011
0.000394919 Document.cpp(3113): _______________________________#Link005.LinkedObject: Link not restored
Object: Body012
0.000471344 Document.cpp(3113): _______________________________#Link006.LinkedObject: Link not restored
Object: Part__Mirroring
0.000580003 Document.cpp(3113): _______________________________#Link010.LinkedObject: Link not restored
Object: Body016
0.000669683 Document.cpp(3113): _______________________________#Link017.LinkedObject: Link not restored
Object: Body007
0.000755356 Document.cpp(3113): _______________________________#Link018.LinkedObject: Link not restored
Object: Body006
0.00125374 Document.cpp(3113): _______________________________#Link019.LinkedObject: Link not restored
Object: Body024
0.00137234 Document.cpp(3113): _______________________________#Link020.LinkedObject: Link not restored
Object: Body025
0.00171837 Document.cpp(3113): _______________________________#Link021.LinkedObject: Link not restored
Object: Body011
0.00183156 Document.cpp(3113): _______________________________#Link022.LinkedObject: Link not restored
Object: Body007
0.00192532 Document.cpp(3113): _______________________________#Link023.LinkedObject: Link not restored
Object: Body006

[tiket18]

The assembly from 22-10-2020 is better, but it still breaks -

OS: Arch Linux (GNOME/gnome-xorg)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.25427 (Git)
Build type: Release
Branch: makepkg
Hash: d4401f2
Python version: 3.8.6
Qt version: 5.15.1
Coin version: 4.0.1
OCC version: 7.4.0
Locale: Russian/Russia (ru_RU)

Command.cpp(1839): duplicate command Std_TreePreSelection
Command.cpp(1839): duplicate command Std_TreeSelectAllInstances
1.283876 <asm3.main> init_gui.py(14): no solver backend found
connect failed: Нет такого файла или каталога
Cannot create object 'Body005': (call stack is not deep enough)
Cannot create object 'Sketch006': (call stack is not deep enough)
Cannot create object 'Pad005': (call stack is not deep enough)
Cannot create object 'Sketch007': (call stack is not deep enough)
Cannot create object 'Job001': (call stack is not deep enough)
Cannot create object 'Operations001': (call stack is not deep enough)
Cannot create object 'Clone005': (call stack is not deep enough)
Cannot create object 'T2__F3_175_15_z4005': (call stack is not deep enough)
Cannot create object 'Stock001': (call stack is not deep enough)
<class 'ValueError'>: call stack is not deep enough
PropertyLinks.cpp(1033): Lost link to __________________3 Clone005 while loading, maybe an object was not loaded correctly
PropertyLinks.cpp(1033): Lost link to __________________3 Sketch007 while loading, maybe an object was not loaded correctly
<class 'ValueError'>: call stack is not deep enough

трафареты3.FCStd.zip

[realthunder]

This problem is hard to diagnose, as I cannot reproduce it on my computer. Might be some setting problem in your build environment?

[tiket18]

Problem solved

OS: Arch Linux (GNOME/gnome-xorg)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.25544 (Git)
Build type: Release
Branch: makepkg
Hash: c22fc90
Python version: 3.8.6
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: Russian/Russia (ru_RU)