Skip to content

Latest commit

 

History

History
181 lines (115 loc) · 9.58 KB

flexvolume.md

File metadata and controls

181 lines (115 loc) · 9.58 KB
Raw
title weight indent
FlexVolume Configuration
1200
true

Ceph FlexVolume Configuration

FlexVolume is not enabled by default since Rook v1.1. This documentation applies only if you have enabled FlexVolume.

If enabled, Rook uses FlexVolume to integrate with Kubernetes for performing storage operations. In some operating systems where Kubernetes is deployed, the default Flexvolume plugin directory (the directory where FlexVolume drivers are installed) is read-only.

Some Kubernetes deployments require you to configure kubelet with a FlexVolume plugin directory that is accessible and read/write (rw). These steps need to be carried out on all nodes in your cluster. Rook needs to be told where this directory is in order for the volume plugin to work.

Platform-specific instructions for the following Kubernetes deployment platforms are linked below

Default FlexVolume path

If you are not using a platform that is listed above and the path /usr/libexec/kubernetes/kubelet-plugins/volume/exec/ is read/write, you don't need to configure anything.

That is because /usr/libexec/kubernetes/kubelet-plugins/volume/exec/ is the kubelet default FlexVolume path and Rook assumes the default FlexVolume path if not set differently.

If running mkdir -p /usr/libexec/kubernetes/kubelet-plugins/volume/exec/ should give you an error about read-only filesystem, you need to use another read/write FlexVolume path and configure it on the Rook operator and kubelet.

These are the other commonly used paths:

  • /var/lib/kubelet/volumeplugins
  • /var/lib/kubelet/volume-plugins

Continue with configuring the FlexVolume path to configure Rook to use the FlexVolume path.

Atomic

See the OpenShift section, unless running with OpenStack Magnum, then see OpenStack Magnum section.

Azure AKS

AKS uses a non-standard FlexVolume plugin directory: /etc/kubernetes/volumeplugins The kubelet on AKS is already configured to use that directory.

Continue with configuring the FlexVolume path to configure Rook to use the FlexVolume path.

ContainerLinux

Use the Most common read/write FlexVolume path for the next steps.

The kubelet's systemD unit file can be located at: /etc/systemd/system/kubelet.service.

Continue with configuring the FlexVolume path to configure Rook to use the FlexVolume path.

Google Kubernetes Engine (GKE)

Google's Kubernetes Engine uses a non-standard FlexVolume plugin directory: /home/kubernetes/flexvolume The kubelet on GKE is already configured to use that directory.

Continue with configuring the FlexVolume path to configure Rook to use the FlexVolume path.

Kubespray

Prior to v2.11.0

Kubespray uses the kubelet_flexvolumes_plugins_dir variable to define where it sets the plugin directory.

Kubespray prior to the v2.11.0 release used a non-standard FlexVolume plugin directory: /var/lib/kubelet/volume-plugins. The Kubespray configured kubelet is already configured to use that directory.

If you are using kubespray v2.10.x or older, continue with configuring the FlexVolume path to configure Rook to use the FlexVolume path.

As of v2.11.0 and newer

Kubespray v2.11.0 included kubernetes-sigs/kubespray#4752 which sets the same plugin directory assumed by rook by default: /usr/libexec/kubernetes/kubelet-plugins/volume/exec.

No special configuration of the directory is needed in Rook unless:

  • Kubespray is deployed onto a platform where the default path is not writable, or
  • you have explicitly defined a custom path in the kubelet_flexvolumes_plugins_dir variable

If you have not defined one, and the default path is not writable, the alternate configuration is /var/lib/kubelet/volumeplugins

If needed, continue with configuring the FlexVolume path to configure Rook to use the FlexVolume path.

OpenShift

To find out which FlexVolume directory path you need to set on the Rook operator, please look at the OpenShift docs of the version you are using, latest OpenShift Flexvolume docs (they also contain the FlexVolume path for Atomic).

Continue with configuring the FlexVolume path to configure Rook to use the FlexVolume path.

OpenStack Magnum

OpenStack Magnum is using Atomic, which uses a non-standard FlexVolume plugin directory at: /var/lib/kubelet/volumeplugins The kubelet in OpenStack Magnum is already configured to use that directory. You will need to use this value when configuring the Rook operator

Rancher

Rancher provides an easy way to configure kubelet. The FlexVolume flag will be shown later on in the configuring the FlexVolume path. It can be provided to the kubelet configuration template at deployment time or by using the up to date feature if Kubernetes is already deployed.

Rancher deploys kubelet as a docker container, you need to mount the host's flexvolume path into the kubelet image as a volume, this can be done in the extra_binds section of the kubelet cluster config.

Configure the Rancher deployed kubelet by updating the cluster.yml file kubelet section:

services:
  kubelet:
    extra_args:
      volume-plugin-dir: /usr/libexec/kubernetes/kubelet-plugins/volume/exec
    extra_binds:
      - /usr/libexec/kubernetes/kubelet-plugins/volume/exec:/usr/libexec/kubernetes/kubelet-plugins/volume/exec

If you're using rke, run rke up, this will update and restart your kubernetes cluster system components, in this case the kubelet docker instance(s) will get restarted with the new volume bind and volume plugin dir flag.

The default FlexVolume path for Rancher is /usr/libexec/kubernetes/kubelet-plugins/volume/exec which is also the default FlexVolume path for the Rook operator.

If the default path as above is used no further configuration is required, otherwise if a different path is used the Rook operator will need to be reconfigured, to do this continue with configuring the FlexVolume path to configure Rook to use the FlexVolume path.

Custom containerized kubelet

Use the most common read/write FlexVolume path for the next steps.

If your kubelet is running as a (Docker, rkt, etc) container you need to make sure that this directory from the host is reachable by the kubelet inside the container.

Continue with configuring the FlexVolume path to configure Rook to use the FlexVolume path.

Configuring the FlexVolume path

If the environment specific section doesn't mention a FlexVolume path in this doc or external docs, please refer to the most common read/write FlexVolume path section, before continuing to configuring the FlexVolume path.

Configuring the Rook operator

You must provide the above found FlexVolume path when deploying the rook-operator by setting the environment variable FLEXVOLUME_DIR_PATH.

Example:

spec:
  template:
    spec:
      containers:
[...]
      - name: rook-ceph-operator
        env:
[...]
        - name: FLEXVOLUME_DIR_PATH
          value: "/var/lib/kubelet/volumeplugins"
[...]

(In the operator.yaml manifest replace <PathToFlexVolumes> with the path or if you use helm set the agent.flexVolumeDirPath to the FlexVolume path)

Configuring the Kubernetes kubelet

You need to add the flexvolume flag with the path to all nodes's kubelet in the Kubernetes cluster:

--volume-plugin-dir=PATH_TO_FLEXVOLUME

(Where the PATH_TO_FLEXVOLUME is the above found FlexVolume path)

The location where you can set the kubelet FlexVolume path (flag) depends on your platform. Please refer to your platform documentation for that and/or the platform specific FlexVolume path for information about that.

After adding the flag to kubelet, kubelet must be restarted for it to pick up the new flag.