Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

test rev G Hall test default configuration with two resistors removed board number 0 C3+C4 #124

Closed
rusefillc opened this issue Apr 20, 2023 · 6 comments
Closed

test rev G Hall test default configuration with two resistors removed board number 0 C3+C4 #124

rusefillc opened this issue Apr 20, 2023 · 6 comments
Assignees
@ElDominio
Labels
VR-magic

Comments

@rusefillc
Copy link
Contributor

rusefillc commented Apr 20, 2023 •
edited
Loading

@ElDominio please confirm that you have a working heat gun
@ElDominio please do not use soldering iron to remove R4
@ElDominio please remove R4 using hot air and tweezers from back side. please place R4 into a little bag mark "R4"
@ElDominio please remove R23 not too far from R4. please place R23 into a little bag mark "R23"

image

image

capacitors stay default
image

@ElDominio need to run this board as hall on C3+C4
@rusefillc rusefillc changed the title test rev G default configuration test rev G default configuration with R4 removed Apr 20, 2023
@rusefillc rusefillc changed the title test rev G default configuration with R4 removed test rev G default configuration with R4 removed board number 0 Apr 20, 2023
@rusefillc rusefillc mentioned this issue Apr 20, 2023
Closed
@rusefillc rusefillc changed the title test rev G default configuration with R4 removed board number 0 test rev G Hall test default configuration with R4 removed board number 0 Apr 20, 2023
@rusefillc rusefillc changed the title test rev G Hall test default configuration with R4 removed board number 0 test rev G Hall test default configuration with two resistors removed board number 0 Apr 20, 2023
@ElDominio
Copy link
Collaborator

Use C3 for CKP and C4 for CMP??

@rusefillc
Copy link
Contributor Author

@ElDominio yes that the request from what I see

@rusefillc rusefillc mentioned this issue Apr 26, 2023
Closed
@rusefillc rusefillc changed the title test rev G Hall test default configuration with two resistors removed board number 0 test rev G Hall test default configuration with two resistors removed board number 0 C3+C4 Apr 28, 2023
@rusefillc
Copy link
Contributor Author

@ElDominio please provide a status update for this C3+C4

@ElDominio
Copy link
Collaborator

ElDominio commented Apr 28, 2023 •
edited
Loading

C3+C4 works fine on easy Hall car Lancer with 4B11, tested on all boards.

Not tested on problematic hall 4G93 with split cam+crank

All tests i did on the other ticket were done with the configuration on THIS thread. I did NOT try C7+C4

@ElDominio
Copy link
Collaborator

Tried revving on board0 and board2, both worked fine @rusefillc

@ElDominio
Copy link
Collaborator

RevG works with Hall/VR

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@ElDominio ElDominio

Labels
VR-magic
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@ElDominio @rusefillc